The performance of South African English first language child speakers on a "low linguistically loaded" central auditory processing test protocol

The lack of standardized tests of central auditory processing disorder (CAPD) in South Africa (SA) led to the formation of a SA CAPD Taskforce, and the interim development of a "low linguistically loaded" CAPD test protocol using test recordings from the 'Tonal and Speech Materials for Auditory Perceptual Assessment Disc 2.0'. This study inferentially compared the performance of 16 SA English first, and 16 SA English second, language adult speakers on this test protocol, and descriptively compared their performances to previously published American normative data. Comparisons between the SA English first and second language speakers showed a poorer right ear performance (p < .05) by the second language speakers on the two-pair dichotic digits test only. Equivalent performances (p < .05) were observed on the left ear performance on the two pair dichotic digits test, and the frequency patterns test, the duration patterns test, the low-pass filtered speech test, the 45% time compressed speech test, the speech masking level difference test, and the consonant vowel consonant (CVC) binaural fusion test. Comparisons between the SA English and the American normative data showed many large differences (up to 37.1% with respect to predicted pass criteria as calculated by mean-2SD cutoffs), with the SA English speakers performing both better and worse depending on the test involved. As a result, the American normative data was not considered appropriate for immediate use as normative data in SA. Instead, the preliminary data provided in this study was recommended as interim normative data for both SA English first and second language adult speakers, until larger scale SA normative data can be obtained.

Treatment of maternal syphilis in rural South Africa: effect of multiple doses of benzathine penicillin on pregnancy loss

OBJECTIVES Despite few data, the treatment of syphilis in pregnant women using a single dose of benzathine penicillin is the standard of care in many resource-poor settings. We examined the effect of various doses of benzathine penicillin on pregnancy loss among women with a positive Rapid Plasma Reagin (RPR) test result in a rural South African district. METHODS All pregnant women making their first antenatal care visit during pregnancy were screened for syphilis using the RPR test. Those testing positive were counselled to receive three weekly doses of benzathine penicillin, and received a partner notification card. Pregnancy outcomes were determined from facility records or home visits where necessary. RESULTS Of 8917 women screened, 1043 (12%) had reactive syphilis serology; of those with titre data available, 30% had titres of 1:8 or greater. While 41% (n = 430) of women received all three doses as counselled, 30% (n = 312) received only one dose, and 20% (n = 207) did not return to the clinic to receive treatment. Among the 947 women with pregnancy outcome data available, there were 17 miscarriages and 48 perinatal deaths observed. There was a strong trend towards reduced risk of pregnancy loss among women receiving multiple doses of penicillin (adjusted OR for perinatal mortality for each additional dose received, 0.63; 95% CI, 0.48-0.84). CONCLUSIONS While this association requires further investigation, these results suggest that there may be substantial benefit to providing multiple doses of benzathine penicillin to treat maternal syphilis in this setting.

Cadherin/catenin complex appears to be intact in hepatocellular carcinomas from Australia and South Africa

Background and aim: E-cadherin binds to beta-catenin to form the cadherin/catenin complex required for strong cell adhesion. Inactivation of this complex in tumors facilitates invasion into surrounding tissues. Alterations of both proteins have been reported in hepatocellular carcinomas (HCC). However, the interactions between E-cadherin and beta-catenin in HCC from different geographical groups have not been explored. The aim of the present study was to assess the role of E-cadherin and beta-catenin in Australian and South African patients with HCC. Methods: DNA was extracted from malignant and non-malignant liver tissue from 37 Australian and 24 South African patients, and from histologically normal liver from 20 transplant donors. Chromosomal instability at 16q22, promoter methylation at E-cadherin, beta-catenin mutations and E-cadherin and beta-catenin protein expression was assessed using loss of heterozygosity, methylation-specific polymerase chain reaction, denaturing high-performance liquid chromatography and immunohistochemistry, respectively. Results: Loss of heterozygosity at 16q22 was prevalent in South African HCC patients (50%vs 11%; P < 0.05, chi(2)). In contrast, E-cadherin promoter hypermethylation was common in Australian cases in both malignant (30%vs 13%; P = not significant, chi(2)) and non-malignant liver (57%vs 8%, respectively, P < 0.001, chi(2)). Methylation of non-malignant liver was more likely to be detected in patients over the age of 50 years (P < 0.001, chi(2)), the overall mean age for our cohort of patients. Only one beta-catenin mutation was identified. E-cadherin protein expression was reduced in one HCC, while abnormalities in protein expression were absent in beta-catenin. Conclusion: Contrary to previous observations in HCC from other countries, neither E-cadherin nor beta-catenin appears to play a role in hepatocarcinogenesis in Australian and South African patients with HCC. (C) 2004 Blackwell Publishing Asia Pty Ltd.

Evaluation of the indirect measures of rock brittleness and fracture toughness in rock cutting

Performance prediction models for partial face mechanical excavators, when developed in laboratory conditions, depend on relating the results of a set of rock property tests and indices to specific cutting energy (SE) for various rock types. There exist some studies in the literature aiming to correlate the geotechnical properties of intact rocks with the SE, especially for massive and widely jointed rock environments. However, those including direct and/or indirect measures of rock fracture parameters such as rock brittleness and fracture toughness, along with the other rock parameters expressing different aspects of rock behavior under drag tools (picks), are rather limited. With this study, it was aimed to investigate the relationships between the indirect measures of rock brittleness and fracture toughness and the SE depending on the results of a new and two previous linear rock cutting programmes. Relationships between the SE, rock strength parameters, and the rock index tests have also been investigated in this study. Sandstone samples taken from the different fields around Ankara, Turkey were used in the new testing programme. Detailed mineralogical analyses, petrographic studies, and rock mechanics and rock cutting tests were performed on these selected sandstone specimens. The assessment of rock cuttability was based on the SE. Three different brittleness indices (B1, B2, and B4) were calculated for sandstones samples, whereas a toughness index (T-i), being developed by Atkinson et al.(1), was employed to represent the indirect rock fracture toughness. The relationships between the SE and the large amounts of new data obtained from the mineralogical analyses, petrographic studies, rock mechanics, and linear rock cutting tests were evaluated by using bivariate correlation and curve fitting techniques, variance analysis, and Student's t-test. Rock cutting and rock property testing data that came from well-known studies of McFeat-Smith and Fowell(2) and Roxborough and Philips(3) have also been employed in statistical analyses together with the new data. Laboratory tests and subsequent analyses revealed that there were close correlations between the SE and B4 whereas no statistically significant correlation has been found between the SE and T-i. Uniaxial compressive and Brazilian tensile strengths and Shore scleroscope hardness of sandstones also exhibited strong relationships with the SE. NCB cone indenter test had the greatest influence on the SE among the other engineering properties of rocks, confirming the previous studies in rock cutting and mechanical excavation. Therefore, it was recommended to employ easy-to-use index tests of NCB cone indenter and Shore scleroscope in the estimation of laboratory SE of sandstones ranging from very low to high strengths in the absence of a rock cutting rig to measure it until the easy-to-use universal measures of the rock brittleness and especially the rock fracture toughness, being an intrinsic rock property, are developed.

Phylogenetic analysis to define feline immunodeficiency virus subtypes in 31 domestic cats in South Africa

Feline immunodeficiency virus (FIV), a lentivirus, is an important pathogen of domestic cats around the world and has many similarities to human immunodeficiency virus (HIV). A characteristic of these lentiviruses is their extensive genetic diversity which has been an obstacle in the development of successful vaccines. Of the FIV genes, the envelope gene is the most variable and sequence differences in a portion of this gene have been used to define 5 FIV subtypes (A, B, C, D and E). In this study, the proviral DNA sequence of the V3-V5 region of the envelope gene was determined in blood samples from 31 FIV positive cats from 4 different regions of South Africa. Phylogenetic analysis demonstrated the presence of both subtypes A and C, with subtype A predominating. These findings contribute to the understanding of the genetic diversity of FIV

Rethinking the labour movement in the "new South Africa"

The socio-economic system underpinning apartheid in South Africa was based on the exploitation of black workers in the mines, the factories, the fields and the shops. It is widely recognized that the struggles of the South African black working class contributed decisively to the overthrow of the racist regime. In recognition of the power of organised labour, the democratic government elected in 1994 granted South Africa's unions unprecedented legal and constitutional rights. However, despite these gains, the country's labour movement has been facing a fresh set of challenges, from macroeconomic policy to the factory floor, many of them emanating from labour’s political allies in Government. The purpose of this book is to examine how the South African labour movement is responding to these challenges in the new millennium. A variety of experts on South African labour, both within the country and outside deal with crucial issues: How has South Africa's labour movement reacted to the ANC Government's neoliberal economic agenda? How do the unions relate to an increasingly diversifying, “flexible” and vulnerable workforce? What are labour’s prospects of contributing to a left project in democratic South Africa? What are the challenges facing the unions in relation to new forms of militancy and social movements?

In situ studies on service life and pick consumption characteristics of shearer drums

Longwall shearers usually suffer from excessive pick and pickholder consumptions and severe wear of the backplate of the clearance ring section of shearer drums. In practice, most of the drums were seen to be withdrawn from the face due to the abovementioned problems, while vane picks and their holders were intact due to the improper lacing design of the clearance ring picks. However, few underground investigations and their results on the effect of lacing arrangement of clearance picks on the service life of shearer drums have been published. Nevertheless, the pick consumption characteristics of shearer drums were not investigated in detail, since these are fewer pick consumptions with shearers when compared to roadheaders. This paper is concerned with the comprehensive in situ trials on the effect of lacing of clearance ring picks on the lifespan of shearer drums, and the pick consumption characteristics of longwall shearers at Cayirhan Coal Mine in Turkey. The lifespan of shearer drums employed with shearers in this mine increased 70 per cent, while the consumption rate of clearance ring picks decreased three fold through using an alternative lacing for clearance picks, indicating the significance of utilizing proper design techniques for clearance ring picks for the service life of shearer drums. Statistical analyses carried out, using the raw pick consumption data, implied that the clearance ring picks experienced much higher loads than vane picks, revealing that special attention must be paid to designing clearance ring picks. An average maximum consumption value of 41 was determined for clearance ring picks, with corner-cutting picks having the most replacements, while it was 35 for vane picks, on three-day based pick replacements.

Occupational information: What children want to know

The present exploratory-descriptive cross-national study focuses on what information children believe they need to find out about jobs. In total, 511 South African and 372 Australian children participated in the study. The present paper reports on the findings related to one item of the Revised Career Awareness Survey used in the study. Data were analyzed using descriptive statistics. The study revealed that the nature of information the children needed to find out was related to life/career implications and life/career management tasks and to a lesser extent to interests and personal characteristics and the nature of work. The implications of the findings for career guidance and counseling practice are discussed.

Design for sampling - preliminary exploration

A modern mineral processing plant represents a substantial investment. During the design process, there is often a period when costs (or revenues) must be compensated for by cuts in capital expenditure. In many cases, sampling and measurement equipment provides a soft target for such 'savings'. This process is almost analgous to reducing the capital investment in a corner store by not including a cash register. The consequences will be quite similar - a serious lack of sound performance data and plenty of opportunities for theft - deliberate or inadvertent. This paper makes the case that investment in sampling and measurement equipment is more cost-effective during the design phase. Further, a strong measurement culture will have many benefits including the ability to take advantage of small gains. In almost any business, there are many more opportunities to make small gains than to make large, step changes. In short, if a project cannot justify the cost of accurate and reliable measurement of its performance, it probably should not be a project at all.