Oral budesonide is as effective as oral prednisolone in active Crohn's disease

Background-The use of corticosteroids in active Crohn's disease often becomes limited by side effects. Budesonide is a potent corticosteroid with low systemic bioavailability due to an extensive first pass liver metabolism. Aims-To compare the efficacy and safety of two dosage regimens of budesonide and prednisolone in patients with active Crohn's disease affecting the ileum and/or the ascending colon. Patients and methods-One hundred and seventy eight patients were randomised to receive budesonide controlled ileal release (CIR) capsules 9 mg once daily or 4.5 mg twice daily, or prednisolone tablets 40 mg once daily. The treatment period was 12 weeks. The primary efficacy variable was clinical remission, defined as a Crohn's Disease Activity Index (CDAI) of 150 or less. Results-After eight weeks of treatment, remission occurred in 60% of patients receiving budesonide once daily or prednisolone and in 42% of those receiving budesonide twice daily (p=0.062). The presence of glucocorticoid associated side effects was similar in all groups; however, moon face was more common in the prednisolone group (p=0.0005). The highest frequency of impaired adrenal function, as measured by a short ACTH test, was found in the prednisolone group (p=0.0023). Conclusions-Budesonide CIR, administered at 9 mg once daily or 4.5 mg twice daily, is comparable to prednisolone in inducing remission in active Crohn's disease. The single dose administration is as promptly effective as prednisolone and represents a simpler and safer therapeutic approach, with a considerable reduction in side effects.

Analysis of pore-fluid pressure gradient and effective vertical-stress gradient distribution in layered hydrodynamic systems

A theoretical analysis is carried out to investigate the pore-fluid pressure gradient and effective vertical-stress gradient distribution in fluid saturated porous rock masses in layered hydrodynamic systems. Three important concepts, namely the critical porosity of a porous medium, the intrinsic Fore-fluid pressure and the intrinsic effective vertical stress of the solid matrix, are presented and discussed. Using some basic scientific principles, we derive analytical solutions and explore the conditions under which either the intrinsic pore-fluid pressure gradient or the intrinsic effective vertical-stress gradient can be maintained at the value of the lithostatic pressure gradient. Even though the intrinsic pore-fluid pressure gradient can be maintained at the value of the lithostatic pressure gradient in a single layer, it is impossible to maintain it at this value in all layers in a layered hydrodynamic system, unless all layers have the same permeability and porosity simultaneously. However, the intrinsic effective vertical-stress gradient of the solid matrix can be maintained at a value close to the lithostatic pressure gradient in all layers in any layered hydrodynamic system within the scope of this study.

Solution techniques for transport problems involving steep concentration gradients: application to noncatalytic fluid solid reactions

Some efficient solution techniques for solving models of noncatalytic gas-solid and fluid-solid reactions are presented. These models include those with non-constant diffusivities for which the formulation reduces to that of a convection-diffusion problem. A singular perturbation problem results for such models in the presence of a large Thiele modulus, for which the classical numerical methods can present difficulties. For the convection-diffusion like case, the time-dependent partial differential equations are transformed by a semi-discrete Petrov-Galerkin finite element method into a system of ordinary differential equations of the initial-value type that can be readily solved. In the presence of a constant diffusivity, in slab geometry the convection-like terms are absent, and the combination of a fitted mesh finite difference method with a predictor-corrector method is used to solve the problem. Both the methods are found to converge, and general reaction rate forms can be treated. These methods are simple and highly efficient for arbitrary particle geometry and parameters, including a large Thiele modulus. (C) 2001 Elsevier Science Ltd. All rights reserved.

Oral ulceration with bone sequestration

Oral mucosal ulceration is a common manifestation of various disease processes. Identification of the aetiological factor(s) involved greatly facilitates the management of such conditions. This report describes oral ulceration of the mucosa overlying the lingual shelf and mylohyoid ridge of the mandible and, less commonly on tori and exostoses, in association with bone sequestration. Trauma, which involves the subjacent periosteum resulting in a focus of ischaemic bone necrosis, in conjunction with local anatomical and perhaps other systemic predisposing factors, forms the aetiopathogenesis for this particular type of focal ulcerative lesion.

Use of confocal microscopy to follow the development of penetrative hyphae during growth of Rhizopus oligosporus in an artificial solid-state fermentation system

Two methods were compared for determining the concentration of penetrative biomass during growth of Rhizopus oligosporus on an artificial solid substrate consisting of an inert gel and starch as the sole source of carbon and energy. The first method was based on the use of a hand microtome to make sections of approximately 0.2- to 0.4-mm thickness parallel to the substrate surface and the determination of the glucosamine content in each slice. Use of glucosamine measurements to estimate biomass concentrations was shown to be problematic due to the large variations in glucosamine content with mycelial age. The second method was a novel method based on the use of confocal scanning laser microscopy to estimate the fractional volume occupied by the biomass. Although it is not simple to translate fractional volumes into dry weights of hyphae due to the lack of experimentally determined conversion factors, measurement of the fractional volumes in themselves is useful for characterizing fungal penetration into the substrate. Growth of penetrative biomass in the artificial model substrate showed two forms of growth with an indistinct mass in the region close to the substrate surface and a few hyphae penetrating perpendicularly to the surface in regions further away from the substrate surface. The biomass profiles against depth obtained from the confocal microscopy showed two linear regions on log-linear plots, which are possibly related to different oxygen availability at different depths within the substrate. Confocal microscopy has the potential to be a powerful tool in the investigation of fungal growth mechanisms in solid-state fermentation. (C) 2003 Wiley Periodicals, Inc.

Population pharmacokinetics of hydroxychloroquine in patients with rheumatoid arthritis

Hydroxychloroquine (HCQ) is an antimalarial drug that is also used as a second-line treatment of rheumatoid arthritis (RA). Clinically, the use of HCQ is characterized by a long delay in the onset of action, and withdrawal of treatment is often a result of inefficacy rather than from toxicity. The slow onset of action can be attributed to the pharmacokinetics (PK) of HCQ, and wide interpatient variability is evident. Tentative relationships between concentration and effect have been made, but to date, no population PK model has been developed for HCQ. This study aimed to develop a population PK model including an estimation of the oral bioavailability of HCQ. In addition, the effects of the coadministration of methotrexate on the PK of HCQ were examined. Hydroxychloroquine blood concentration data were combined from previous pharmacokinetic studies in patients with rheumatoid arthritis. A total of 123 patients were studied, giving the data cohort from four previously published studies. Two groups of patients were included: 74 received hydroxychloroquine (HCQ) alone, and 49 received HCQ and methotrexate (MTX). All data analyses were carried out using the NONMEM program. A one-compartment PK model was supported, rather than a three-compartment model as previously published, probably because of the clustering of concentrations taken at the end of a dosing interval. The population estimate of bioavailability of 0.75 (0.07), n = 9, was consistent with literature values. The parameter values from the final model were: (Cl) over bar = 9.9 +/- 0.4 L/h, (V) over bar 605 +/- 91 L, (k(d)) over bar = 0.77 +/- 0.22 hours(-1), (t(tag)) over bar = 0.44 +/- 0.02 hours. Clearance was not affected by the presence of MTX, and, hence, steady-state drug concentrations and maintenance dosage requirements were similar. A population PK model was successfully developed for HCQ.

Toward better outcomes with tacrolimus therapy: Population pharmacokinetics and individualized dosage prediction in adult liver transplantation

Patient outcomes in transplantation would improve if dosing of immunosuppressive agents was individualized. The aim of this study is to develop a population pharmacokinetic model of tacrolimus in adult liver transplant recipients and test this model in individualizing therapy. Population analysis was performed on data from 68 patients. Estimates were sought for apparent clearance (CL/F) and apparent volume of distribution (V/F) using the nonlinear mixed effects model program (NONMEM). Factors screened for influence on these parameters were weight, age, sex, transplant type, biliary reconstructive procedure, postoperative day, days of therapy, liver function test results, creatinine clearance, hematocrit, corticosteroid dose, and interacting drugs. The predictive performance of the developed model was evaluated through Bayesian forecasting in an independent cohort of 36 patients. No linear correlation existed between tacrolimus dosage and trough concentration (r(2) = 0.005). Mean individual Bayesian estimates for CL/F and V/F were 26.5 8.2 (SD) L/hr and 399 +/- 185 L, respectively. CL/F was greater in patients with normal liver function. V/F increased with patient weight. CL/F decreased with increasing hematocrit. Based on the derived model, a 70-kg patient with an aspartate aminotransferase (AST) level less than 70 U/L would require a tacrolimus dose of 4.7 mg twice daily to achieve a steady-state trough concentration of 10 ng/mL. A 50-kg patient with an AST level greater than 70 U/L would require a dose of 2.6 mg. Marked interindividual variability (43% to 93%) and residual random error (3.3 ng/mL) were observed. Predictions made using the final model were reasonably nonbiased (0.56 ng/mL), but imprecise (4.8 ng/mL). Pharmacokinetic information obtained will assist in tacrolimus dosing; however, further investigation into reasons for the pharmacokinetic variability of tacrolimus is required.

Electromagnetic modeling of conformal wideband and multi-band patch antennas by bridging a solid-object modeler with MoM software

The advantages of antennas that can resemble the shape of the body to which they are attached are obvious. However, electromagnetic modeling of such unusually shaped antennas can be difficult. In this paper, the commercially available software SolidWorks(TM) is used for accurately drawing complex shapes in conjunction with the electromagnetic software FEKO(TM) to model the EM behavior of conformal antennas. The application of SolidWorks and custom-written software allows all the required information that forms the analyzed structure to be automatically inserted into FEKO, and gives the user complete control over the antenna being modeled. This approach is illustrated by a number of simulation examples of single, wideband, multi-band planar and curved patch antennas.

Clinical pharmacokinetics and pharmacodynamics of tacrolimus in solid organ transplantation

The aim of this review is to analyse critically the recent literature on the clinical pharmacokinetics and pharmacodynamics of tacrolimus in solid organ transplant recipients. Dosage and target concentration recommendations for tacrolimus vary from centre to centre, and large pharmacokinetic variability makes it difficult to predict what concentration will be achieved with a particular dose or dosage change. Therapeutic ranges have not been based on statistical approaches. The majority of pharmacokinetic studies have involved intense blood sampling in small homogeneous groups in the immediate post-transplant period. Most have used nonspecific immunoassays and provide little information on pharmacokinetic variability. Demographic investigations seeking correlations between pharmacokinetic parameters and patient factors have generally looked at one covariate at a time and have involved small patient numbers. Factors reported to influence the pharmacokinetics of tacrolimus include the patient group studied, hepatic dysfunction, hepatitis C status, time after transplantation, patient age, donor liver characteristics, recipient race, haematocrit and albumin concentrations, diurnal rhythm, food administration, corticosteroid dosage, diarrhoea and cytochrome P450 (CYP) isoenzyme and P-glycoprotein expression. Population analyses are adding to our understanding of the pharmacokinetics of tacrolimus, but such investigations are still in their infancy. A significant proportion of model variability remains unexplained. Population modelling and Bayesian forecasting may be improved if CYP isoenzymes and/or P-glycoprotein expression could be considered as covariates. Reports have been conflicting as to whether low tacrolimus trough concentrations are related to rejection. Several studies have demonstrated a correlation between high trough concentrations and toxicity, particularly nephrotoxicity. The best predictor of pharmacological effect may be drug concentrations in the transplanted organ itself. Researchers have started to question current reliance on trough measurement during therapeutic drug monitoring, with instances of toxicity and rejection occurring when trough concentrations are within 'acceptable' ranges. The correlation between blood concentration and drug exposure can be improved by use of non-trough timepoints. However, controversy exists as to whether this will provide any great benefit, given the added complexity in monitoring. Investigators are now attempting to quantify the pharmacological effects of tacrolimus on immune cells through assays that measure in vivo calcineurin inhibition and markers of immuno suppression such as cytokine concentration. To date, no studies have correlated pharmacodynamic marker assay results with immunosuppressive efficacy, as determined by allograft outcome, or investigated the relationship between calcineurin inhibition and drug adverse effects. Little is known about the magnitude of the pharmacodynamic variability of tacrolimus.

Syntactic complexity measures and their relation to oral proficiency in Japanese as a foreign language

The study reported in this article is a part of a large-scale study investigating syntactic complexity in second language (L2) oral data in commonly taught foreign languages (English, German, Japanese, and Spanish; Ortega, Iwashita, Rabie, & Norris, in preparation). In this article, preliminary findings of the analysis of the Japanese data are reported. Syntactic complexity, which is referred to as syntactic maturity or the use of a range of forms with degrees of sophistication (Ortega, 2003), has long been of interest to researchers in L2 writing. In L2 speaking, researchers have examined syntactic complexity in learner speech in the context of pedagogic intervention (e.g., task type, planning time) and the validation of rating scales. In these studies complexity is examined using measures commonly employed in L2 writing studies. It is assumed that these measures are valid and reliable, but few studies explain what syntactic complexity measures actually examine. The language studied is predominantly English, and little is known about whether the findings of such studies can be applied to languages that are typologically different from English. This study examines how syntactic complexity measures relate to oral proficiency in Japanese as a foreign language. An in-depth analysis of speech samples from 33 learners of Japanese is presented. The results of the analysis are compared across proficiency levels and cross-referenced with 3 other proficiency measures used in the study. As in past studies, the length of T-units and the number of clauses per T-unit is found to be the best way to predict learner proficiency; the measure also had a significant linear relation with independent oral proficiency measures. These results are discussed in light of the notion of syntactic complexity and the interfaces between second language acquisition and language testing. Adapted from the source document

Standing wave bed forms at Plage de la Grande Roche, le Verdelet, Pléneuf-Val-André, Cote d’Armor (France)

Coastal Photograph by Hubert Chanson This photograph of standing wave bed forms was taken at very low tide. The tidal range was 10 m. The bed forms were located on the island of Le Verdelet, in a channel between Le Grande Jaune and Le Verdelet. It is likely that these standing wave bed forms were formed during transcritical shallow water flows at the end of ebb tide. The author’s watch is in the foreground for scale. (Coastal Photograph by Hubert Chanson, Division of Civil Engineering, the University of Queensland, Brisbane, Queensland 4072, Australia.)

Dissolution of a solid sphere in an unbounded, stagnant liquid

An exact analytical solution is obtained for the transient dissolution of solid spheres in a diffusion-controlled environment. This result provides a useful reference point for drug testing in humans. The dimensionless solution is expressed in terms of a single parameter, which accounts for solubility, bulk flow, and stagnant fluid composition. A simple, explicit and exact expression was found to predict time-to-complete dissolution (TCD). An approximate solution was also found which tracks the exact case for low solubility conditions.

Task Complexity and Variation in L2 Learner’s Oral Discourse

There are many factors which affect the L2 learner’s performance at the levels of phonology, morphology and syntax. Consequently when L2 learners attempt to communicate in the target language, their language production will show systematic variability across the above mentioned linguistic domains. This variation can be attributed to some factors such as interlocutors, topic familiarity, prior knowledge, task condition, planning time and tasks types. This paper reports the results of an on going research investigating the issue of variability attributed to the task type. It is hypothesized that the particular type of task learners are required to perform will result in variation in their performance. Results of the statistical analyses of this study investigating the issue of variation in the performance of twenty L2 learners at the English department of Tabriz University provided evidence in support of the hypothesis that performance of L2 learners show systematic variability attributed to task.