A bang-bang PLL employing dynamic gain control for low jitter and fast lock times

Bang-bang phase detector based PLLs are simple to design, suffer no systematic phase error, and can run at the highest speed a process can make a working flip-flop. For these reasons designers are employing them in the design of very high speed Clock Data Recovery (CDR) architectures. The major drawback of this class of PLL is the inherent jitter due to quantized phase and frequency corrections. Reducing loop gain can proportionally improve jitter performance, but also reduces locking time and pull-in range. This paper presents a novel PLL design that dynamically scales its gain in order to achieve fast lock times while improving fitter performance in lock. Under certain circumstances the design also demonstrates improved capture range. This paper also analyses the behaviour of a bang-bang type PLL when far from lock, and demonstrates that the pull-in range is proportional to the square root of the PLL loop gain.

London-van der Waals adhesiveness of rough particles

Van der Waals forces often dominate interactions and adhesion between fine particles and, in turn, decisively influence the bulk behaviour of powders. However, so far there is no effective means to characterize the adhesive behaviour of such particles. A complication is that most powder particles have rough surfaces, and it is the asperities on the surfaces that touch, confounding the actual surface that is in contact. Conventional approaches using surface energy provide limited information regarding adhesion, and pull-off forces measured through atomic force microscope (AFM) are highly variable and difficult to interpret. In this paper we develop a model which combines the Rumpf-Rabinovich and the JKR-DMT theories to account simultaneously for the effects of surface roughness and deformation on adhesion. This is applied to a 'characteristic asperity' which may be easily obtained from AFM measurements. The concept of adhesiveness, a material property reflecting the influences of elastic deformability, surface roughness, and interfacial surface energy, is introduced as an efficient and quantitative measure of the adhering tendency of a powder. Furthermore, a novel concept of specific adhesiveness is proposed as a convenient tool for characterizing and benchmarking solid materials. This paper provides an example to illustrate the use of the proposed theories. (c) 2005 Elsevier B.V. All rights reserved.

Developing a research framework for understanding the social realities, with special reference to Sri Lankan entrepreneurs

This paper identifies and examines issues of relevance for increasing effectiveness of entrepreneurial management research. These issues emerged from research into entrepreneurial behaviour and underlying motivations in Sri Lanka. Understanding of socially- and culturally-bound social actors, social actions and social outputs in entrepreneurial activity requires context-sensitivity, expressed through cognisance of institutional characteristics, the interface between cultural values and business, and historical and cultural forces which impact on entrepreneurship. We suggest that this requires exploration through bottom-up translations of actions consistent with the beliefs and values of the actors involved, employing qualitative methodology to ground the reality of human behaviour in deep-rooted cultural and social contexts. Thorough interpretation of holistic case studies that are capable of capturing the actors' viewpoints brings appropriate insights to the field of entrepreneurship.

Laparoscopic Swenson procedure - An optimal approach for both primary and secondary pull-through for Hirschsprung's disease

Background/Purpose: Several pull-through procedures are available for the surgical management of Hirschsprung's disease (HD) in children. The authors have adopted a laparoscopic approach since 1995, including laparoscopic Swenson procedure (LSw), both for one-stage primary and 2-stage secondary procedures. The aim of this study was to examine the role of LSw in children with HD in both primary and secondary procedures. Methods: From January 1995 to December 2001, 42 children with biopsy-proven HD underwent laparoscopic pull-through procedure for HD. This group included 29 children who underwent LSw, a detailed analysis of which forms the basis of this report. Results: Sixteen children underwent a single-stage neonatal LSw; the median weight of this group at the time of surgery was 3.2 kg and the median age was 5 days. Secondary LSw was performed in the remaining 13 children, which included 3 children with total colonic HD who underwent laparoscopic total colectomy and LSw. The median operating time was 105 minutes (range, 66 to 175 minutes). The median time to commence full diet was 48 hours (range, 24 to 86 hours), and median time to return to normal play and activity was 72 hours (range, 48 hours to 5 days). There was no difference in operating time between primary and secondary pull-through procedures. There were no intraoperative complications, and no patient required open conversion. Postoperative ileus was noted in 3 children and enterocolitis in 2. The median hospital stay was 4 days (range, 2 to 6 days). Follow-up was between 6 months to 7 years with a median follow-up of 2.2 years. At follow-up, 2 children required laparoscopic antegrade continence enema procedure. A satisfactory continence was noted in 15 of the 19 children who were older than 3 years at the time of last follow-up. Conclusions: LSw seems to be a suitable procedure for laparoscopic management of HD in children. LSw is safe and effective, both for primary and secondary type of pull-through procedures, with good short-term results.

Motivations and perceived influences on rural and urban general practitioners when prescribing conventional non-steroidal anti-inflammatory drugs or COX-2 inhibitors

Background and objective: Prescribers in rural and remote locations perceive that there are different influences on their prescribing compared with those experienced by urban prescribers. The aim of this study was to compare the motivations and perceived influences on general practitioners (GPs) when prescribing COX-2 inhibitors rather than conventional non-steroidal anti-inflammatory drugs (NSAIDs) between rural and urban-based GPs in Queensland, Australia. Methods: A questionnaire was administered to two geographically distinct groups of GPs, one urban (n = 67) and one rural (n = 67), investigating the reasons that the GP would prescribe a COX-2 inhibitor rather than a conventional NSAID or vice versa and also focusing on patients requesting a prescription for a COX-2 inhibitor. Results and discussion: A 51% response rate (n = 68) was achieved. The difference between the rural and the urban GPs was that the urban GPs were more likely to perceive that they were influenced to prescribe COX-2 inhibitors by their patients' knowledge of these new (at the time) drugs. GPs in both the rural and urban areas perceived the COX-2 selective inhibitors to be safer than conventional NSAIDs, and that there was little difference in terms of efficacy between the two drug classes. However, GPs from both of the study areas stated that conventional NSAIDs were preferred over COX-2 selective inhibitors, primarily due to their expense, if their patients were not at risk for developing a GI bleed. Conclusion: The motivations and perceived influences to prescribe a COX-2 inhibitor in rural and in urban areas of Queensland, Australia were very similar. Almost all surveyed GPs in rural and urban areas had patients request a prescription, or enquire about the COX-2 inhibitors. Urban GPs were more likely to feel pressured to prescribe a COX-2 inhibitor than their rural counterparts, agreeing with other research which found that patient pressure to prescribe appears to be greater in urban general practice.

Motivations for group membership: The role of subjective importance and uncertainty reduction

An experiment was conducted to investigate the idea that an important motive for identifying with social groups is to reduce subjective uncertainty, particularly uncertainty on subjectively important dimensions that have implications for the self-concept (e.g., Hogg, 1996; Hogg & Mullin, 1999). When people are uncertain on a dimension that is subjectively important, they self-categorize in terms of an available social categorization and, thus, exhibit group behaviors. To test this general hypothesis, group membership, task uncertainty, and task importance were manipulated in a 2 x 2 x 2 between-participants design (N = 128), under relatively minimal group conditions. Ingroup identification and desire for consensual validation of specific attitudes were the key dependent measures, but we also measured social awareness. All three predictions were supported. Participants identified with their group (H1), and desired to obtain consensual validation from ingroup members (H2) when they were uncertain about their judgments on important dimensions, indicating that uncertainty reduction motivated participants towards embracing group membership. In addition, identification mediated the interactive effect of the independent variables on consensual validation (H3), and the experimental results were not associated with an increased sense of social awareness and, therefore, were unlikely to represent only behavioral compliance with generic social norms. Some implications of this research in the study of cults and totalist groups and the explication of genocide and group violence are discussed.