A survey of possible associations between preharvest environment conditions and postharvest rejections of cut freesia flowers

Botrytis cinerea is the major pathogen infecting cut freesia flowers. Flecking symptoms on petals caused by this fungus result in postharvest rejections and substantial economic loss to both growers and sellers. In a limited survey for industry, numbers of freesia stems sent from a specialist grower in The Netherlands and rejected at a cut flower wholesaler in the United Kingdom were documented. Relationships between preharvest environment conditions in Holland that may predispose flowers to infection and postharvest freesia rejection levels in the United Kingdom due to B. cinerea flecking symptom expression are reported. Freesia rejections peaked during spring and, to a lesser degree, autumn periods. However, no clear correlations between preharvest growing environment conditions (e.g. 3-day means for temperature preceding harvest) and postharvest rejection frequency (%) could be discerned. Thus, sporadic freesia rejections in the United Kingdom were probably attributable either to other unresolved variables during the pre- (e.g. infection pressure) and/or postharvest (e.g. condensation events) phases or to interactions among predisposing variables.

Elicitors of induced disease resistance in postharvest horticultural crops: a brief review

Increasing loss of conventional fungicides due to pathogen resistance and general unacceptability in terms of public and environmental risk have favoured the introduction of integrated pest management (IPM) programmes. Induction of natural disease resistance (NDR) in harvested horticultural crops using physical, biological and/or chemical elicitors has received increasing attention over recent years, it being considered a preferred strategy for disease management. This article reviews the enhancement of constitutive and inducible antifungal compounds and suppression of postharvest diseases through using elicitors. The effect of timing of pre- and/or postharvest elicitor treatment and environment on the degree of elicitation and the potential for inducing local acquired resistance, systemic acquired resistance and/or induced systemic resistance to reduce postharvest disease is discussed. The review highlights that more applied and basic research is required to understand the role that induced NDR can play in achieving practical suppression of postharvest diseases as part of an IPM approach. (C) 2003 Elsevier B.V. All rights reserved.

Effects of postharvest methyl jasmonate treatments against Botrytis cinerea on Geraldton waxflower (Chamelaucium uncinatum)

Cut Geraldton waxflower (Chamelaucium uncinatum Schauer) flowers are often infected with Botrytis cinerea. Release of infection from quiescence can cause ethylene production by invaded host tissues and result in flower abscission. Postharvest floral organ abscission is a major problem for the commercial waxflower industry. Methyl jasmonate (MeJA) occurs naturally in plant tissue and has a signalling role in eliciting induced systemic resistance against disease. MeJA treatments have been shown to suppress B. cinerea infecting cut rose flowers. The present experiments investigated the potential of exogenous MeJA treatments for B. cinerea management on harvested waxflower. MeJA treatments of 10 and 100 L liquid MeJA/L of air applied to cv. Purple Pride and 1 L MeJA/L to cv. Mullering Brook gave reductions in disease severity for uninoculated stems. However, concentrations of 100 L MeJA/L applied to Purple Pride in addition to 1 and 10 L MeJA/L applied to Mullering Brook increased the incidence of floral organ fall. Flower abscission upon treatment with MeJA may be due to induced systemic resistance-associated upregulation of ethylene biosynthesis. MeJA treatments had no direct effect on B. cinerea hyphal elongation in vitro. Collectively, these results show that while MeJA treatment may elicit defence in waxflower against Botrytis, the chemical also causes floral organ fall. Thus, exogenous MeJA treatments do not have potential for B. cinerea management on harvested waxflower.

Postharvest characteristics and handling of litchi fruit - an overview

Litchi ( Litchi chinensis Sonn.) is a tropical to subtropical crop that originated in South-East Asia. Litchi fruit are prized on the world market for their flavour, semi-translucent white aril and attractive red skin. Litchi is now grown commercially in many countries and production in Australia, China, Israel, South Africa and Thailand has expanded markedly in recent years. Increased production has made significant contributions to economic development in these countries, especially those in South-East Asia. Non-climacteric litchi fruit are harvested at their visual and organoleptic optimum. They are highly perishable and, consequently, have a short life that limits marketability and potential expansion of demand. Pericarp browning and pathological decay are common and important defects of harvested litchi fruit. Postharvest technologies have been developed to reduce these defects. These technologies involve cooling and heating the fruit, use of various packages and packaging materials and the application of fungicides and other chemicals. Through the use of fungicides and refrigeration, litchi fruit have a storage life of about 30 days. However, when they are removed from storage, their shelf life at ambient temperature is very short due to pericarp browning and fruit rotting. Low temperature acclimation or use of chitsoan as a coating can extend the shelf life. Sulfur dioxide fumigation effectively reduces pericarp browning, but approval from Europe, Australia and Japan for this chemical is likely to be withdrawn due to concerns over sulfur residues in fumigated fruit. Thus, sulfur-free postharvest treatments that maintain fruit skin colour are increasingly important. Alternatives to SO2 fumigation for control of pericarp browning and fruit rotting are pre-storage pathogen management, anoxia treatment, and dipping in 2% hydrogen chloride solution for 6-8 min following storage at 0 degrees C. Insect disinfestation has become increasingly important for the expansion of export markets because of quarantine issues associated with some fruit fly species. Thus, effective disinfestation protocols need to be developed. Heat treatment has shown promise as a quarantine technology, but it injures pericarp tissue and results in skin browning. However, heat treatment can be combined with an acid dip treatment that inhibits browning. Therefore, the primary aim of postharvest litchi research remains the achievement of highly coloured fruit which is free of pests and disease. Future research should focus on disease control before harvest, combined acid and heat treatments after harvest and careful temperature management during storage and transport.

Postharvest infection of Freesia hybrida flowers by Botrytis cinerea

'Specking' on harvested freesia (Freesia hybrida) flowers is a problem worldwide. The disease is caused by the fungal pathogen Botrytis cinerea. This disease symptom detracts from appearance and reduces marketability of the flowers. Unlike other important cut flower crops (e.g. gerbera), the mode of infection and epidemiology of postharvest freesia flower specking caused by B. cinerea has not been reported. Epidemiological studies were carried out under simulated conditions typical of those occurring during postharvest handling of freesia flowers. Infection of freesia flowers by B. cinerea occurred when a conidium germinated, formed a germ tube(s) and penetrated epidermal cells. Fungal hyphae then colonised adjacent cells, resulting in visible lesions. Different host reactions were observed on freesia 'Cote d'Azur' petals at 20 degrees C compared to 5 degrees C. The infection process was relatively rapid at 20 degrees C, with visible lesions produced within 7 h of incubation. However, lesion expansion ceased after 24 h of incubation. Infection was slower at 5 degrees C, with visible lesions produced after 48 h of incubation. However, lesion development at 5 degrees C was continuous, with lesions expanding over 4 days. Light microscopy observations revealed increased host defence reactions during infection. These reactions involved production of phenolic compounds, probably lignin and/or callose, around infection sites. Such substances may play a role in restricting petal colonisation and lesion expansion. Disease severity and lesion numbers on freesia flowers incubated at 12 degrees C were higher, but not significantly higher (P > 0.05), than on those incubated at 20 degrees C. Disease severity and progression were differentially mediated by temperature and relative humidity (R. H.). Infection of freesia flowers was severe at 100% R. H. for all three incubation temperatures of 5, 12 and 20 degrees C. In contrast, no lesions were produced at 80 to 90% R. H. at either 5 or 20 degrees C.

Advances in understanding of enzymatic browning in harvested litchi fruit

Litchi (Litchi chinensis Sonn.) is a subtropical to tropical fruit of high commercial value in international trade. However, harvested litchi fruit rapidly lose their bright red skin colour. Peel browning of harvested litchi fruit has largely been attributed to rapid degradation of red anthocyanin pigments. This process is associated with enzymatic oxidation of phenolics by polyphenol oxidase (PPO) and/or peroxidase (POD). PRO and POD from litchi pericarp cannot directly oxidize anthocyanins. Moreover, PPO substrates in the pericarp are not well characterised. Consequently, the roles of PPO and POD in litchi browning require further investigation. Recently, an anthocyanase catalysing the hydrolysis of sugar moieties from anthocyanin to anthocyanidin has been identified in litchi peel for the first time. Thus, litchi enzymatic browning may involve an anthocyanase-anthocyanin-phenolic-PPO reaction. Current research focus is on characterising the properties of the anthocyanase involved in anthocyanin degradation. Associated emphasis is on maintenance of membrane functions in relation to loss of compartmentation between litchi peel oxidase enzymes and their substrates. (C) 2004 Elsevier Ltd. All rights reserved.

Anatomy of ethylene-induced floral-organ abscission in Chamelaucium uncinatum (Myrtaceae)

Postharvest abscission of Geraldton waxflower (Chamelaucium uncinatum Schauer) flower buds and flowers is ethylene-mediated. Exposure of floral organs to exogenous ethylene (1 mu L L-1) for 6 h at 20 degrees C induced separation at a morphologically and anatomically distinct abscission zone between the pedicel and. oral tube. Flower buds with opening petals and flowers with a nectiferous hypanthium were generally more responsive to exogenous ethylene than were flower buds enclosed in shiny bracteoles and aged (senescing) flowers. The anatomy of abscission-zone cells did not change at sequential stages of floral development from immature buds to aged flowers. The zone comprised a layer of small, laterally elongated-to-rounded, closely packed and highly protoplasmic parenchyma cells. Abscission occurred at a two- to four-cell-wide separation layer within the abscission zone. The process involved degradation of the middle lamella between separation layer cells. Following abscission, cells on both the proximal and distal faces of the separation layer became spherical, loosely packed and contained degenerating protoplasm. Central vascular tissues within the surrounding band of separation layer cells became torn and fractured. For flower buds, bracteoles that enclose the immature floral tube also separated at an abscission zone. However, this secondary abscission zone appeared less sensitive to ethylene than the primary ( central). oral-tube abscission zone as bracteoles generally only completely abscised when exposed to 10 mu L L-1 ethylene for the longer period of 24 h at 20 degrees C. The smooth surfaces of abscised separation-layer cells suggest that hydrolase enzymes degrade the middle lamella between adjacent cell walls.