57 resultados para PORE WATERS
em University of Queensland eSpace - Australia
Resumo:
Recent research suggests that future decreases in the carbonate saturation state of surface seawater associated with the projected build-up of atmospheric CO2 could cause a global decline in coral reef-building capacity. Whether significant reductions in coral calcification are underway is a matter of considerable debate. Multicentury records of skeletal calcification extracted from massive corals have the potential to reconstruct the progressive effect of anthropogenic changes in carbonate saturation on coral reefs. However, early marine aragonite cements are commonly precipitated from pore waters in the basal portions of massive coral skeletons and, if undetected, could result in apparent nonlinear reductions in coral calcification toward the present. To address this issue, we present records of coral skeletal density, extension rate, calcification rate, δ13C, and δ18O for well preserved and diagenetically altered coral cores spanning ∼1830-1994 A.D. at Ningaloo Reef Marine Park, Western Australia. The record for the pristine coral shows no significant decrease in skeletal density or δ13C indicative of anthropogenic changes in carbonate saturation state or δ13C of surface seawater (oceanic Suess effect). In contrast, progressive addition of early marine inorganic aragonite toward the base of the altered coral produces an apparent ∼25% decrease in skeletal density toward the present, which misleadingly matches the nonlinear twentieth century decrease in coral calcification predicted by recent modeling and experimental studies. In addition, the diagenetic aragonite is enriched in 13C, relative to coral aragonite, resulting in a nonlinear decrease in δ13C toward the present that mimics the decrease in δ13C expected from the oceanic Suess effect. Taken together, these diagenetic changes in skeletal density and δ13C could be misinterpreted to reflect changes in surface-ocean carbonate saturation state driven by the twentieth century build-up of atmospheric CO2. Copyright 2004 by the American Geophysical Union.
Resumo:
A diagnosis is given for the lecithasterid genus Hysterolecithoides Yamaguti, 1934, which is now found to have two to six (possibly seven) vitelline masses. The species H. frontilatus (Manter, 1969) is returned to the genus, having been considered a member of the bunocotylid genus Neotheletrum by recent authors. It is redescribed from Siganus nebulosus, Moreton Bay, and S. doliatus, Lizard Island, Great Barrier Reef and New Caledonia, with emphasis on the presence of Juel's organ, a uterine seminal receptacle and the blind sac associated with the genital atrium. It differs from its congeners in the trajectory of the pars prostatica which recurves dorsally to the sinus-sac. Oligolecithoides Shen, 1982 is synonymised with Hysterolecithoides and O. trilobatus Shen, 1982 is synomised with H. epinepheli Yamaguti, 1934. Machidatrema Leon-Regagnon, 1998 is diagnosed, and found to be close to Hysterolecithoides, but differs in the lack of a blind-sac projecting from the dorsal genital atrium, by its tandem testes, the coiling of the uterus between the testes and the ovary, and the ventral excretory pore. M. leonae n. sp. is described from Siganus fuscescens, S. lineatus, S. doliatus, S. corallinus, S. vulpinus and Scarus globiceps at Heron Island, Queensland. It differs from its closest congener, M. akeh, in the muscular and tegumental flap over the genital pore and details of the terminal genitalia. M. chilostoma (Machida, 1980) and M. kyphosi (Yamaguti, 1970) are redescribed from Kyphosus vaigiensis from Heron Island. Neotheletrum Gibson & Bray, 1979 is diagnosed: it differs from Hysterolecithoides in its confluent excretory arms, blind seminal receptacle (no Juel's organ) and uniformly tripartite vitellarium. A cladistic analysis suggests that M. chilostoma and M. kyphosi are not best accommodated in Machidatrema, that Machidatrema (sensu stricto) is monophyletic and that Hysterolecithoides is paraphyletic. Hysterolecithoides and Machidatrema are considered hysterolecithine lecithasterids, whilst Neotheletrum is retained as an opisthadenine bunocotylid.
Resumo:
A new species of Allopodocotyle Pritchard, 1966 is described from the intestine and pyloric caeca of Parequula melbournensis (Gerreidae) caught from the waters off South and Western Australia. The new species is distinguished from other species by its larger eggs, broader form, pre-bifurcal genital pore and a number of other measurable features that are discussed. Of the species that share morphological similarities with Allopodocotyle skoliorchis n. sp., it is the only species known from a gerreid; all the other species are from serranids.
Resumo:
An unusual saltwater population of the "freshwater" crocodilian, Crocodylus johnstoni, was studied in the estuary of the Limmen Bight River in Australia's Northern Territory and compared with populations in permanently freshwater habitats. Crocodiles in the river were found across a large salinity gradient, from fresh water to a salinity of 24 mg.ml-1, more than twice the body fluid concentration. Plasma osmolarity, concentrations of plasma Na+, Cl-, and K+, and exchangeable Na+ pools were all remarkably constant across the salinity spectrum and were not substantially higher or more variable than those in crocodiles from permanently freshwater habitats. Body fluid volumes did not vary; condition factor and hydration status of crocodiles were not correlated with salinity and were not different from those of crocodiles from permanently fresh water. C. johnstoni clearly has considerable powers of osmoregulation in waters of low to medium salinity. Whether this osmoregulatory competence, extends to continuously hyperosmotic environments is not known, but distributional data suggest that C. johnstoni in hyperosmotic conditions may require periodic access to hypoosmotic water. The study demonstrates a physiological capacity for colonisation of at least some estuarine waters by this normally stenohaline freshwater crocodilian.
Resumo:
We investigate here a modification of the discrete random pore model [Bhatia SK, Vartak BJ, Carbon 1996;34:1383], by including an additional rate constant which takes into account the different reactivity of the initial pore surface having attached functional groups and hydrogens, relative to the subsequently exposed surface. It is observed that the relative initial reactivity has a significant effect on the conversion and structural evolution, underscoring the importance of initial surface chemistry. The model is tested against experimental data on chemically controlled char oxidation and steam gasification at various temperatures. It is seen that the variations of the reaction rate and surface area with conversion are better represented by the present approach than earlier random pore models. The results clearly indicate the improvement of model predictions in the low conversion region, where the effect of the initially attached functional groups and hydrogens is more significant, particularly for char oxidation. It is also seen that, for the data examined, the initial surface chemistry is less important for steam gasification as compared to the oxidation reaction. Further development of the approach must also incorporate the dynamics of surface complexation, which is not considered here.
Resumo:
Street elevation.
Resumo:
Street elevation.
Resumo:
The conventional analysis for the estimation of the tortuosity factor for transport in porous media is modified here to account for the effect of pore aspect ratio. Structural models of the porous medium are also constructed for calculating the aspect ratio as a function of porosity. Comparison of the model predictions with the extensive data of Currie (1960) for the effective diffusivity of hydrogen in packed beds shows good agreement with a network model of randomly oriented intersecting pores for porosities upto about 50 percent, which is the region of practical interest. The predictions based on this network model are also found to be in better agreement with the data of Currie than earlier expressions developed for unconsolidated and grainy media.
Resumo:
Activated carbon as catalyst support was treated with HCl, HNO3, and HF and the effects of acid treatments on the properties of the activated carbon support were studied by N-2 adsorption, mass titration, temperature-programmed desorption (TPD), and X-ray photoelectron spectrometry (XPS). Ni catalysts supported on untreated and treated activated carbons were prepared, characterized and tested for the reforming reaction of methane with carbon dioxide. It is found that acid treatment significantly changed the surface chemical properties and pore structure of the activated carbon. The surface area and pore volume of the carbon supports are generally enhanced upon acid treatment due to the removal of impurities present in the carbon. The adsorption capacity of Ni2+ on the carbon supports is also increased, and the increase can be closely correlated with the surface acidity. The impregnation of nickel salts decreases the surface area and pore volume of carbon supports both in micropores and mesopores. Acid treatment results in a more homogeneous distribution of the nickel salt in carbon. When the impregnated carbons are heated in inert atmosphere, there exists a redox reaction between nickel oxide and the carbon. Catalytic activity tests for methane reforming with carbon dioxide show that the activity of nickel catalysts based on the acid-treated carbon supports is closely related with the surface characteristics of catalysts. (C) 1998 Elsevier Science Ltd. All rights reserved.
Resumo:
The pore structure stability of MCM-41 materials upon hydration/dehydration was studied by XRD, Si-29 MAS NMR, and gravimetric adsorption techniques. Results demonstrated that collapses of the pore structure of MCM-41 occurred upon rehydration at room temperature due to the hydrolysis of the bare Si-O-Si(Al) bonds in the presence of water vapor. Full structure collapses of MCM-41 were found to occur when a MCM-41 sample was left in air for three months. It is also suggested that care must be taken when XRD is used to evaluate the structure property of MCM-41 materials to avoid the possible adverse effects of water vapor.
Resumo:
A theoretical analysis is carried out to investigate the pore-fluid pressure gradient and effective vertical-stress gradient distribution in fluid saturated porous rock masses in layered hydrodynamic systems. Three important concepts, namely the critical porosity of a porous medium, the intrinsic Fore-fluid pressure and the intrinsic effective vertical stress of the solid matrix, are presented and discussed. Using some basic scientific principles, we derive analytical solutions and explore the conditions under which either the intrinsic pore-fluid pressure gradient or the intrinsic effective vertical-stress gradient can be maintained at the value of the lithostatic pressure gradient. Even though the intrinsic pore-fluid pressure gradient can be maintained at the value of the lithostatic pressure gradient in a single layer, it is impossible to maintain it at this value in all layers in a layered hydrodynamic system, unless all layers have the same permeability and porosity simultaneously. However, the intrinsic effective vertical-stress gradient of the solid matrix can be maintained at a value close to the lithostatic pressure gradient in all layers in any layered hydrodynamic system within the scope of this study.
Resumo:
The problem of extracting pore size distributions from characterization data is solved here with particular reference to adsorption. The technique developed is based on a finite element collocation discretization of the adsorption integral, with fitting of the isotherm data by least squares using regularization. A rapid and simple technique for ensuring non-negativity of the solutions is also developed which modifies the original solution having some negativity. The technique yields stable and converged solutions, and is implemented in a package RIDFEC. The package is demonstrated to be robust, yielding results which are less sensitive to experimental error than conventional methods, with fitting errors matching the known data error. It is shown that the choice of relative or absolute error norm in the least-squares analysis is best based on the kind of error in the data. (C) 1998 Elsevier Science Ltd. All rights reserved.
Resumo:
Purpose, An integrated ionic mobility-pore model for epidermal iontophoresis is developed from theoretical considerations using both the free volume and pore restriction forms of the model for a range of solute radii (r(j)) approaching the pore radii (r(p)) as well as approximation of the pore restriction form for r(j)/r(p) < 0.4. In this model, we defined the determinants for iontophoresis as solute size (defined by MV, MW or radius), solute mobility, solute shape, solute charge, the Debye layer thickness, total current applied, solute concentration, fraction ionized, presence of extraneous ions (defined by solvent conductivity), epidermal permselectivity, partitioning rates to account for interaction of unionized and ionized lipophilic solutes with the wall of the pore and electroosmosis. Methods, The ionic mobility-pore model was developed from theoretical considerations to include each of the determinants of iontophoretic transport. The model was then used to reexamine iontophoretic flux conductivity and iontophoretic flux-fraction ionized literature data on the determinants of iontophoretic flux. Results. The ionic mobility-pore model was found to be consistent with existing experimental data and determinants defining iontophoretic transport. However, the predicted effects of solute size on iontophoresis are more consistent with the pore-restriction than free volume form of the model. A reanalysis of iontophoretic flux-conductivity data confirmed the model's prediction that, in the absence of significant electroosmosis, the reciprocal of flux is linearly related to either donor or receptor solution conductivity. Significant interaction with the pore walls, as described by the model, accounted for the reported pH dependence of the iontophoretic transport for a range of ionizable solutes. Conclusions. The ionic mobility-pore iontophoretic model developed enables a range of determinants of iontophoresis to be described in a single unifying equation which recognises a range of determinants of iontophoretic flux.