Effect of rainfall as a component of climate change on estuarine fish production in Queensland, Australia

The speculation that climate change may impact on sustainable fish production suggests a need to understand how these effects influence fish catch on a broad scale. With a gross annual value of A$ 2.2 billion, the fishing industry is a significant primary industry in Australia. Many commercially important fish species use estuarine habitats such as mangroves, tidal flats and seagrass beds as nurseries or breeding grounds and have lifecycles correlated to rainfall and temperature patterns. Correlation of catches of mullet (e.g. Mugil cephalus) and barramundi (Lates calcarifer) with rainfall suggests that fisheries may be sensitive to effects of climate change. This work reviews key commercial fish and crustacean species and their link to estuaries and climate parameters. A conceptual model demonstrates ecological and biophysical links of estuarine habitats that influences capture fisheries production. The difficulty involved in explaining the effect of climate change on fisheries arising from the lack of ecological knowledge may be overcome by relating climate parameters with long-term fish catch data. Catch per unit effort (CPUE), rainfall, the Southern Oscillation Index (SOI) and catch time series for specific combinations of climate seasons and regions have been explored and surplus production models applied to Queensland's commercial fish catch data with the program CLIMPROD. Results indicate that up to 30% of Queensland's total fish catch and up to 80% of the barramundi catch variation for specific regions can be explained by rainfall often with a lagged response to rainfall events. Our approach allows an evaluation of the economic consequences of climate parameters on estuarine fisheries. thus highlighting the need to develop forecast models and manage estuaries for future climate chan e impact by adjusting the quota for climate change sensitive species. Different modelling approaches are discussed with respect to their forecast ability. (c) 2006 Elsevier Ltd. All rights reserved.

Adherence of Plasmodium falciparum infected erythrocytes to CHO-745 cells and inhibition of binding by protein A in the presence of human serum

Adhesion of erythrocytes infected with the malaria parasite Plasmodium falciparum to human host receptors is a process associated with severe malarial pathology. A number of in vitro cell lines are available as models for these adhesive processes, including Chinese hamster ovary (CHO) cells which express the placental adhesion receptor chondroitin-4-sulphate (CSA) on their surface. CHO-745 cells, a glycosaminoglycan-negative mutant CHO cell line lacking CSA and other reported P. falciparum adhesion receptors, are often used for recombinant expression of host receptors and for receptor binding studies. In this study we show that P. falciparum-infected erythrocytes can be easily selected for adhesion to an endogenous receptor on the surface of CHO-745 cells, bringing into question the validity of using these cells as a tool for P. falciparum adhesin expression studies. The adhesive interaction between CHO-745 cells and parasitized erythrocytes described here is not mediated by the known P. falciparum adhesion receptors CSA, CD36, or ICAM-1. However, we found that CHO-745-selected parasitized erythrocytes bind normal human IgM and that adhesion to CHO-745 cells is inhibited by protein A in the presence of serum, but not in its absence, indicating a non-specific inhibitory effect. Thus, protein A, which has been used as an inhibitor for a recently described interaction between infected erythrocytes and the placenta, may not be an appropriate in vitro inhibitor for understanding in vivo adhesive interactions. (c) 2005 Australian Society for Parasitology Inc. Published by Elsevier Ltd. All rights reserved.

Pain differs from non-painful attention-demanding or stressful tasks in its effect on postural control patterns of trunk muscles

Pain changes postural activation of the trunk muscles. The cause of these changes is not known but one possibility relates to the information processing requirements and the stressful nature of pain. This study investigated this possibility by evaluating electromyographic activity (EMG) of the deep and superficial trunk muscles associated with voluntary rapid arm movement. Data were collected from control trials, trials during low back pain (LBP) elicited by injection of hypertonic saline into the back muscles, trials during a non-painful attention-demanding task, and during the same task that was also stressful. Pain did not change the reaction time (RT) of the movement, had variable effects on RT of the superficial trunk muscles, but consistently increased RT of the deepest abdominal muscle. The effect of the attention-demanding task was opposite: increased RT of the movement and the superficial trunk muscles but no effect on RT of the deep trunk muscles. Thus, activation of the deep trunk muscles occurred earlier relative to the movement. When the attention-demanding task was made stressful, the RT of the movement and superficial trunk muscles was unchanged but the RT of the deep trunk muscles was increased. Thus, the temporal relationship between deep trunk muscle activation and arm movement was restored. This means that although postural activation of the deep trunk muscles is not affected when central nervous system resources are limited, it is delayed when the individual is also under stress. However, a non-painful attention-demanding task does not replicate the effect of pain on postural control of the trunk muscles even when the task is stressful.

The effect of a reduction in heroin supply on fatal and non-fatal drug overdoses in New South Wales, Australia

Objective: To examine the impact of a sudden and dramatic decrease in heroin availability, concomitant with increases in price and decreases in purity, on fatal and non-fatal drug overdoses in New South Wales, Australia. Design and setting: Time-series analysis was conducted where possible on data on overdoses collected from NSW hospital emergency departments, the NSW Ambulance Service, and all suspected drug-related deaths referred to the NSW Coroner's court. Main outcome measures: The number of suspected drug-related deaths where heroin and other drugs were mentioned; ambulance calls to suspected opioid overdoses; and emergency department admissions for overdoses on heroin and other drugs. Results: Both fatal and non-fatal heroin overdoses decreased significantly after heroin supply reduced; the reductions were greater among younger age groups than older age groups. There were no clear increases in non-fatal overdoses with cocaine, methamphetamines or benzodiazepines recorded at hospital emergency departments after the reduction in heroin supply. Data on drug-related deaths suggested that heroin use was the predominant driver of drug-related deaths in NSW, and that when heroin supply was reduced overdose deaths were more likely to involve a wider combination of drugs. Conclusion: A reduction in heroin supply reduced heroin-related deaths, and did not result in a concomitant increase, to the same degree, in deaths relating to other drugs. Younger people were more affected by the reduction in supply.

Effect on trend estimates of the difference between survey respondents and non-respondents: Results from 27 populations in the WHO MONIICA Project

Introduction: In the World Health Organization (WHO) MONICA (multinational MONItoring of trends and determinants in CArdiovascular disease) Project considerable effort was made to obtain basic data on non-respondents to community based surveys of cardiovascular risk factors. The first purpose of this paper is to examine differences in socio-economic and health profiles among respondents and non-respondents. The second purpose is to investigate the effect of non-response on estimates of trends. Methods:Socio-economic and health profile between respondents and non-respondents in the WHO MONICA Project final survey were compared. The potential effect of non-response on the trend estimates between the initial survey and final survey approximately ten years later was investigated using both MONICA data and hypothetical data. Results: In most of the populations, non-respondents were more likely to be single, less well educated, and had poorer lifestyles and health profiles than respondents. As an example of the consequences, temporal trends in prevalence of daily smokers are shown to be overestimated in most populations if they were based only on data from respondents. Conclusions: The socio-economic and health profiles of respondents and non-respondents differed fairly consistently across 27 populations. Hence, the estimators of population trends based on respondent data are likely to be biased. Declining response rates therefore pose a threat to the accuracy of estimates of risk factor trends in many countries.

Development of a non-intrusive heat transfer coefficient gauge and its application to high pressure die casting Effect of the process parameters

A heat transfer coefficient gauge has been built, obeying particular rules in order to ensure the relevance and accuracy of the collected information. The gauge body is made out of the same materials as the die casting die (H13). It is equipped with six thermocouples located at different depths in the body and with a sapphire light pipe. The light pipe is linked to an optic fibre, which is connected to a monochromatic pyrometer. Thermocouples and pyrometer measurements are recorded with a data logger. A high pressure die casting die was instrumented with one such gauge. A set of 150 castings was done and the data recorded. During the casting, some process parameters have been modified such as piston velocity, intensification pressure, delay before switch to the intensification stage, temperature of the alloy, etc.... The data was treated with an inverse method in order to transform temperature measurements into heat flux density and heat transfer coefficient plots. The piston velocity and the initial temperature of the die seem to be the process parameters that have the greatest influence on the heat transfer. (c) 2005 Elsevier B.V. All rights reserved.

Coupled thermal, structural and vibrational analysis of a hypersonic engine for flight test

This paper describes a relatively simple and quick method for implementing aerodynamic heating models into a finite element code for non-linear transient thermal-structural and thermal-structural-vibrational analyses of a Mach 10 generic HyShot scramjet engine. The thermal-structural-vibrational response of the engine was studied for the descent trajectory from 60 to 26 km. Aerodynamic heating fluxes, as a function of spatial position and time for varying trajectory points, were implemented in the transient heat analysis. Additionally, the combined effect of varying dynamic pressure and thermal loads with altitude was considered. This aero-thermal-structural analysis capability was used to assess the temperature distribution, engine geometry distortion and yielding of the structural material due to aerodynamic heating during the descent trajectory, and for optimising the wall thickness, nose radius of leading edge, etc. of the engine intake. A structural vibration analysis was also performed following the aero-thermal-structural analysis to determine the changes in natural frequencies of the structural vibration modes that occur at the various temperatures associated with the descent trajectory. This analysis provides a unique and relatively simple design strategy for predicting and mitigating the thermal-structural-vibrational response of hypersonic engines. (C) 2006 Elsevier SAS. All rights reserved.

Effect of thermal acclimation on female resistance to forced matings in the eastern mosquitofish

All copulations in the eastern mosquitofish, Gambusia holbrooki, are coercive-and-achieved by force. Female G. holbrooki never appear to cooperate with males, but vigorously resist matings at all times. We examined the role of females within a sexually coercive mating system by investigating the ability of female G. holbrooki to resist forced copulations after acclimation to 16 degrees C and 32 degrees C for 4-5 weeks. We also examined burst swimming performance of female G. holbrooki after acclimation, as this trait is likely to underlie a female's ability to resist forced matings. We predicted that if female G. holbrooki indiscriminately resist matings from all males, acclimation would enhance female resistance at their acclimation temperature. However, we found that it did not. We also predicted that if females are able to influence the outcome of mating interactions, acclimation to an optimal thermal environment may induce females to reduce resistance. In support of this prediction, females acclimated at 32 degrees C were able to modify their resistance behaviour between exposure to 16 degrees C and 32 degrees C. The rate of copulations experienced by 32 inverted perpendicular C-acclimated females was 2.5 times greater at 32 degrees C than at 16 degrees C. In addition, acclimation at 32 degrees C significantly enhanced burst swimming performance at 32 degrees C but no effect of acclimation was observed at 16 degrees C. Our results suggest that female G. holbrooki are able to play a greater role in determining the outcome of sexual coercive mating interactions than previously thought. (c) 2006 The Association for the Shidy of Animal Behavioor. Published by Elsevier Ltd. All rights reserved.

Effect of over-doped yttrium on the microstructure, mechanical properties and thermal properties of a Zr-based metallic glass

The effects of over-doped yttrium on the microstructure, mechanical properties and thermal behaviour of an oxygen-contaminated Zr51Cu20.7Ni12Al16.3 bulk metallic glass are studied systematically. It has been found that, when yttrium doping is beyond the optimum doping, the glass-forming ability enhancement effect induced by yttrium addition decreases and the mechanical properties are adversely affected. In this study, a new phase with an orthorhombic structure (a = 0.69 nm, b = 0.75 nm and c = 0.74 nm) is identified in the yttrium over-doped alloys. (c) 2006 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

The effect of non-standard employment on work-family balance

Across the last four decades, the structure of the Australian labour market has changed profoundly as non-standard forms of employment have become more prevalent. According to many researchers, the growth of non-standard work has been driven by employee preferences, particularly among married women, for greater flexibility to balance paid work with domestic responsibilities and other non-work related pursuits. In contrast, other researchers argue that the increasing prevalence of non-standard employment reflects employer demands for greater staffing flexibility. From this perspective, non-standard forms of employment are considered to have a negative effect on work-family balance. This paper explores whether non-standard employment is associated with improved or poorer work-to-family conflict and tests whether experiences vary by gender. It concentrates on three common forms of non-standard employment: part-time employment, casual and fixed-term work contracts and flexible scheduling practices (such as evening work, weekend work and irregular rostering). Analysis is based on 2299 employed parents from the first wave of the Household, Income and Labour Dynamics on Australia (HILDA) project. Results show that few scheduling measures are significant determinants of work-family balance. However, part-time employment is associated with reduced work-to-family strain for both men and women, even after controlling for various other employment and household related characteristics. Casual employment, in contrast, incurs the cost of poorer work-family balance for men. Surprisingly, HILDA data show that overall men experience greater work-to-family strain than women.