Variables affecting the fine grinding of minerals using stirred mills

Base metal resources are becoming more fine-grained and refractory and minerals separation processes require these ores to be milled to increasingly finer sizes. To cope with very fine grinding to below a P-80 of approximately 15 mum stirred milling technology has been adopted from other industries Neither this technology, nor the basic concepts of fine grinding, are well understood by the minerals processing industry. Laboratory studies were therefore carried out in order to investigate fine milling using different types of stirred mills. The variables analysed were stirrer speed, grinding media type and size, slurry solids content as well as the feed and product size. The results of the testwork have shown that all of these variables affect the grinding efficiency. The ratio of media size to material size was found to be of particular significance. The results were also analysed using the stress intensity approach and the optimum stress intensity ranges for the most efficient grinding were determined. Application of the results for process optimisation in the industrial size units is also discussed in this paper. (C) 2003 Elsevier Science Ltd. All rights reserved.

Modelling the large deformations in stratified media - the Cosserat continuum approach

Methods employing continuum approximation in describing the deformation of layered materials possess a clear advantage over explicit models, However, the conventional implicit models based on the theory of anisotropic continua suffers from certain difficulties associated with interface slip and internal instabilities. These difficulties can be remedied by considering the bending stiffness of the layers. This implies the introduction of moment (couple) stresses and internal rotations, which leads to a Cosserat-type theory. In the present model, the behaviour of the layered material is assumed to be linearly elastic; the interfaces are assumed to be elastic perfectly plastic. Conditions of slip or no slip at the interfaces are detected by a Coulomb criterion with tension cut off at zero normal stress. The theory is valid for large deformation analysis. The model is incorporated into the finite element program AFENA and validated against analytical solutions of elementary buckling problems in layered medium. A problem associated with buckling of the roof and the floor of a rectangular excavation in jointed rock mass under high horizontal in situ stresses is considered as the main application of the theory. Copyright (C) 1999 John Wiley & Sons, Ltd.

Finite element modelling of dissipative structures for nonequilibrium chemical reactions in fluid-saturated porous media

We use the finite element method to model and predict the dissipative structures of chemical species for a nonequilibrium chemical reaction system in a fluid-saturated porous medium. In particular, we explore the conditions under which dissipative structures of the species may exist in the Brusselator type of nonequilibrium chemical reaction. Since this is the first time the finite element method and related strategies have been used to study the chemical instability problems in a fluid-saturated porous medium, it is essential to validate the method and strategies before they are put into application. For this purpose, we have rigorously derived the analytical solutions for dissipative structures of chemical species in a benchmark problem, which geometrically is a square. Comparison of the numerical solutions with the analytical ones demonstrates that the proposed numerical method and strategy are robust enough to solve chemical instability problems in a fluid-saturated porous medium. Finally, the related numerical results from two application examples indicate that both the regime and the magnitude of pore-fluid flow have significant effects on the nature of the dissipative structures that developed for a nonequilibrium chemical reaction system in a fluid-saturated porous medium. The motivation for this study is that self-organization under conditions of pore-fluid flow in a porous medium is a potential mechanism of the orebody formation and mineralization in the upper crust of the Earth. (C) 2000 Elsevier Science S.A. All rights reserved.

Urinary albumin levels in the normal range determine arterial wall thickness in adults with Type 2 diabetes: a FIELD substudy

Aim Cardiovascular disease (CVD) rates are substantially higher among patients with Type 2 diabetes than in the general population. The objective of this study was to identify the determinants of carotid intima media thickness (IMT) in patients with Type 2 diabetes. Methods We measured the thickness of the intima media layer of the carotid artery, a strong predictor of the risk of future vascular events, in 397 Type 2 diabetic patients drawn from the Fenofibrate Intervention and Event Lowering in Diabetes study, prior to treatment allocation. Results The mean IMT was 0.78 mm [interquartile range (IQR) 0.23 mm], and the maximum IMT was 1.17 mm (IQR 0.36 mm). By multivariate analysis, age, sex, duration of diabetes, triglycerides, and total cholesterol were independently correlated with IMT, as was urine albumin-creatinine ratio (ACR) (P < 0.001). The effect of ACR on IMT was further examined by tertile. Clinically significant differences in IMT were associated with ACR > 0.65 mg/mmol, approximately one-fifth the standard clinical threshold for microalbuminuria (P < 0.01). Long-term diabetes, independent of other parameters, was associated with a 50% increase in age-related thickening. Conclusions IMT in people with Type 2 diabetes is independently and continuously related to urine albumin levels and to the duration of diabetes. These results support previous data linking urine albumin measurements within the normal range with increased ischaemic cardiac mortality in the setting of Type 2 diabetes, and strongly suggest that urine albumin levels within this range should trigger a formal evaluation for CVD.

Becoming media literate? Media Education in Slovenia after Ten Years

The system of education in Slovenia includes pre-school education; primary education; secondary education (vocational education, technical education, general education [grammar schools]); higher education (university [undergraduate and postgraduate education] and professional type). In this course students develop the ability to analyze and evaluate media messages and to identify for themselves issues of concern, as well as... to discuss, understand, explain and with production through cooperation with student's media their own communication (ZaIa, age 34, media education professor at University of Maribor).

Diastolic dysfunction is a manifestation of ventricular-vascular interaction in patients with type 2 diabetes mellitus

Vascular disease is accelerated in patients with Type 2 diabetes mellitus (T2DM). Since the systemic vasculature plays a pivotal role in myocardial loading, this study aimed to determine the effect of arterial characteristics on left ventricular (LV) morphology and function in patients with T2DM. Conventional echocardiography and tissue Doppler imaging were performed in 172 T2DM patients (95 men; aged 55±11y) with preserved ejection fraction (62±5%). Patients were stratified into groups based on LV geometric pattern (normal [n = 79], concentric remodeling [n = 33], concentric hypertrophy [n = 29], eccentric hypertrophy [n = 31]). Total arterial compliance (TAC) was recorded by simultaneous radial tonometry and aortic outflow pulsed wave Doppler. Arterial (brachial and carotid) structure and function were determined by standard ultrasound methods. There were no significant differences between the LV geometric groups in demographic or clinical parameters. The concentric hypertrophy group had significantly increased carotid artery diameter (6.0±0.7mm versus 6.5±0.7mm; p < 0.05) and stiffness (1912±1203 dynes/cm2mm versus 2976±2695 dynes/cm2mm×10−6; p < 0.05) compared to those with normal geometry. However, TAC did not differ between groups. LV diastolic function, as determined by the ratio of diastolic mitral inflow velocity to mitral annulus tissue velocity (E/E_), was significantly associated with carotid artery relative wall thickness and intima media thickness (p < 0.05). Moreover, E/E_ was independently predicted by carotid artery relative wall thickness (β = 22.9; p = 0.007). We conclude that structural characteristics of the carotid artery are associated with abnormal LV structure and function in patients with T2DM. The LV functional irregularities may be a downstream consequence of amplified pressure wave reflections effecting sub-optimal ventricular-vascular interaction.

Language disorders in dementia of the Alzheimer type

The language profile of a group of 18 Alzheimer patients is documented and their performance on a standard aphasia test battery compared to a group of institutionalized, nonneurologically impaired control subjects matched for age, sex, and educational level. The Alzheimer patients scored significantly lower than the controls in the areas of verbal expression, auditory comprehension, repetition, reading, and writing. Articulation abilities were the same in each group. A language deficit was evident in all Alzheimer patients. The language disorder exhibited resembled a transcortical sensory aphasia. Syntax and phonology remained relatively intact but semantic abilities were impaired. The results support the inclusion of a language deficit as a diagnostic criterion of Alzheimer's disease.

There is no subjunctive in English

The western classical tradition identifies three moods: indicative, subjunctive, imperative. Protagoras split the indicative into interrogative and declarative. Palmer 2001, 2003 argues for only two: indicative and subjunctive. Given any of these classifications of mood, English has no category of mood and so has no subjunctive. Instead it has certain clause-types which express hypotheticality and which can be subsumed to the irrealis branch of the apparently universal category realis~irrealis; to which subjunctives, optatives, jussives and the like can also be subsumed.

Analytical solution of forced convection in a duct of rectangular cross-section saturated by a porous medium

A theoretical analysis is presented to investigate fully developed (both thermally and hydrodynamically) forced convection in a duct of rectangular cross-section filled with a hyper-porous medium. The Darcy-Brinkman model for flow through porous media was adopted in the present analysis. A Fourier series type solution is applied to obtain the exact velocity and temperature distribution within the duct. The case of uniform heat flux on the walls, i.e. the H boundary condition in the terminology of Kays and Crawford [1], is treated. Values of the Nusselt number and the friction factor as a function of the aspect ratio, the Darcy number, and the viscosity ratio are reported.

Refractive index tomography of turbid media by bifocal optical coherence refractometry

We demonstrate tomographic imaging of the refractive index of turbid media using bifocal optical coherence refractometry (BOCR). The technique, which is a variant of optical coherence tomography, is based on the measurement of the optical pathlength difference between two foci simultaneously present in a medium of interest. We describe a new method to axially shift the bifocal optical pathlength that avoids the need to physically relocate the objective lens or the sample during an axial scan, and present an experimental realization based on an adaptive liquid-crystal lens. We present experimental results, including video clips, which demonstrate refractive index tomography of a range of turbid liquid phantoms, as well as of human skin in vivo.