Interior of tower, Carpenter Hall house, Wilston, Brisbane

View to landscape beyond through windows of upper level of tower.

Interior of tower, Carpenter Hall house, Wilston, Brisbane

View to landscape beyond through windows of upper level of tower (shown open).

Placard on truck during Labour Day procession Brisbane 1966

Placard "Brisbane 1966 not Germany 1936" on truck during Labour Day procession Brisbane 1966. Image shows arrest of student during anti war demonstration in Brisbane, Australia, 1966. City Hall tower can be seen in background.

Eastern edge, General Purpose North 3, University of Queensland, St Lucia

As seen from informal courtyard; Duhig Tower beyond.

Interior under construction, Carpenter Hall house, Wilston, Brisbane

View to upper tower from lower section of house.

Media stress intensity analysis for vertical stirred mills

Experimental work has been carried out to investigate the effect of major operating variables on milling efficiency of calcium carbonate in laboratory and pilot size Tower and Sala Agitated (SAM) mills. The results suggest that the stirrer speed, media size and slurry density affect the specific energy consumption required to achieve the given product size. Media stress intensity analysis developed for high-speed horizontal mills was modified to include the effect of gravitational force in the vertical stirred mills such as the Tower and SAM units. The results suggest that this approach can be successfully applied for both mill types. For a given specific energy input, an optimum stress intensity range existed, for which the finest product was achieved. Finer product and therefore higher milling efficiency was obtained with SAM in the range of operating conditions tested. (C) 2001 Elsevier Science Ltd. All rights reserved.

Preparation and characterisation of biodegradable starch-based nanocomposite materials

Different formulations of biodegradable starch-polyester blend nanocomposite materials have been film blown on a pilot scale film blowing tower. The physical properties of different films have been examined by thermal and mechanical analysis and X-ray diffraction. The results show that the addition of an organoclay (from 0 to 5 wt%) significantly improves both the processing and tensile properties over the original starch blends. Wide angle X-ray diffraction (WAXD) results indicate that the best results were obtained for 30wt% starch blends, and the level of delamination depends on the ratio of starch to polyester and amount of organoclay added. The crystallisation temperature of the nanocomposite blends is significantly lower than the base blend. This is probably due to the platelets inhibiting order, and hence crystallisation, of the starch and polyester. The mechanical and thermal properties of the blends are also sensitive to the way the clay particles are dispersed. (C) 2003 Society of Chemical Industry.