Analysis of pore-fluid pressure gradient and effective vertical-stress gradient distribution in layered hydrodynamic systems

A theoretical analysis is carried out to investigate the pore-fluid pressure gradient and effective vertical-stress gradient distribution in fluid saturated porous rock masses in layered hydrodynamic systems. Three important concepts, namely the critical porosity of a porous medium, the intrinsic Fore-fluid pressure and the intrinsic effective vertical stress of the solid matrix, are presented and discussed. Using some basic scientific principles, we derive analytical solutions and explore the conditions under which either the intrinsic pore-fluid pressure gradient or the intrinsic effective vertical-stress gradient can be maintained at the value of the lithostatic pressure gradient. Even though the intrinsic pore-fluid pressure gradient can be maintained at the value of the lithostatic pressure gradient in a single layer, it is impossible to maintain it at this value in all layers in a layered hydrodynamic system, unless all layers have the same permeability and porosity simultaneously. However, the intrinsic effective vertical-stress gradient of the solid matrix can be maintained at a value close to the lithostatic pressure gradient in all layers in any layered hydrodynamic system within the scope of this study.

A numerical study of pore-fluid, thermal and mass flow iu fluid-saturated porous rock basins

We present a numerical methodology for the study of convective pore-fluid, thermal and mass flow in fluid-saturated porous rock basins. lit particular, we investigate the occurrence and distribution pattern of temperature gradient driven convective pore-fluid flow and hydrocarbon transport in the Australian North West Shelf basin. The related numerical results have demonstrated that: (1) The finite element method combined with the progressive asymptotic approach procedure is a useful tool for dealing with temperature gradient driven pore-fluid flow and mass transport in fluid-saturated hydrothermal basins; (2) Convective pore-fluid flow generally becomes focused in more permeable layers, especially when the layers are thick enough to accommodate the appropriate convective cells; (3) Large dislocation of strata has a significant influence off the distribution patterns of convective pore;fluid flow, thermal flow and hydrocarbon transport in the North West Shelf basin; (4) As a direct consequence of the formation of convective pore-fluid cells, the hydrocarbon concentration is highly localized in the range bounded by two major faults in the basin.

An electron microscopic study of nickel sulfide inclusions in toughened glass

It has been known since the early sixties that nickel sulfide inclusions cause spontaneous fracture of toughened (thermally tempered) glass, but despite the considerable amount of work done on this problem in the last four decades, failures still occur in the field with regularity. In this study we have classified (by viewing through a 60x optical microscope) inclusions into two groups, which are classic and atypical nickel sulfides. The classics look like the nickel sulfide inclusions found at the initiation-of-fracture of windows that have broken spontaneously. We have compared the structure and composition of the atypical inclusions with the structure and composition of the classics. All of the classic and atypical nickel sulfide inclusions studied in this work were found to have a composition in the range of Ni52S48 to Ni48S52. Inclusions on the nickel rich side of stoichiometric NiS were found to be two-phase assemblies, and inclusions on the sulphur rich side of NiS were single phase. It had been proposed that the atypicals were passive, and of a different composition to the classics. However, we found that the difference between passive and dangerous nickel sulfide inclusions was not a difference in composition but rather a difference in the type of material in the internal pore space. The passive's had carbon char in their internal pore space, whereas the pore space of dangerous inclusions contained Na2O. The presence of Na2O and carbon char with the inclusions indicates that the formation of the inclusions results from a reaction of a nickel-rich phase with sodium sulphate and carbon. (C) 2001 Kluwer Academic Publishers.

Stability of nonlinear difference inclusions

The stability of difference inclusions x(k+1) is an element of F(x(k)) is studied, where F(x) = {F(x, gimel) : is an element of Lambda} and the selections F(., gimel) : E -->E assume values in a Banach space E, partially ordered by a cone K. It is assumed that the operators F(.,gimel) are heterotone or pseudoconcave. The main results concern asymptotically stable absorbing sets, and include the case of a single equilibrium point. The results are applied to a number of practical problems.

Speleothem master chronologies: combined Holocene O-18 and C-13 records from the North Island of New Zealand and their palaeoenvironmental interpretation

The stable isotope records of four stalagmites dated by 19 TIMS uranium series ages are combined to produce master chronologies for delta(18)O and delta(13)C The delta(18)O records display good overall coherence, but considerable variation in detail. Variability in the delta(13)C records is greater, but general trends can still be discerned. This implies that too fine an interpretation of the structure of individual isotopic records can be unreliable. Speleothem delta(18)O values are demonstrated to show a positive relationship with temperature by comparing trends with other proxy records, but also to respond negatively to rainfall amount. Speleothem delta(13)C is considered to be most influenced by rainfall. The postglacial thermal optimum occur-red around 10.8 ka BP, which is similar in timing to Antarctica but up to 2000 years earlier than most Northern Hemisphere sites. Increasingly negative delta(18)O values after 7.5 ka BP indicate that temperatures declined to a late mid-Holocene minimum centred around 3 ka BP, but more positive values followed to mark a warm peak about 750 years ago which coincided with the 'Mediaeval Warm Period' of Europe. Low 5110 values at 325 years BP suggest cooling coincident with the 'Little Ice Age'. A marked feature of the delta(13)C record is an asymmetric periodicity averaging c. 2250 years and amplitude of c. 1.9parts per thousand. It is concluded that this is mainly driven by waterbalance variations with negative swings representing particularly wet intervals. The 5110 record shows a higher-frequency cyclicity with a period of c. 500 years and an amplitude of c. 0.25 parts per thousand. This is most likely to be temperature-driven, but some swings may have been amplified by precipitation.

Factors predictive of intravenous fluid administration errors in Australian surgical care wards

Background: Intravenous (IV) fluid administration is an integral component of clinical care. Errors in administration can cause detrimental patient outcomes and increase healthcare costs, although little is known about medication administration errors associated with continuous IV infusions. Objectives: ( 1) To ascertain the prevalence of medication administration errors for continuous IV infusions and identify the variables that caused them. ( 2) To quantify the probability of errors by fitting a logistic regression model to the data. Methods: A prospective study was conducted on three surgical wards at a teaching hospital in Australia. All study participants received continuous infusions of IV fluids. Parenteral nutrition and non-electrolyte containing intermittent drug infusions ( such as antibiotics) were excluded. Medication administration errors and contributing variables were documented using a direct observational approach. Results: Six hundred and eighty seven observations were made, with 124 (18.0%) having at least one medication administration error. The most common error observed was wrong administration rate. The median deviation from the prescribed rate was 247 ml/h (interquartile range 275 to + 33.8 ml/ h). Errors were more likely to occur if an IV infusion control device was not used and as the duration of the infusion increased. Conclusions: Administration errors involving continuous IV infusions occur frequently. They could be reduced by more common use of IV infusion control devices and regular checking of administration rates.

Hypermethylation of the 5 ' CpG island of the gene encoding the serine protease Testisin promotes its loss in testicular tumorigenesis

The Testisin gene (PRSS21) encodes a glycosylphosphatidylinositol (GPI)-linked serine protease that exhibits testis tissue-specific expression. Loss of Testisin has been implicated in testicular tumorigenesis, but its role in testis biology and tumorigenesis is not known. Here we have investigated the role of CpG methylation in Testisin gene inactivation and tested the hypothesis that Testisin may act as a tumour suppressor for testicular tumorigenesis. Using sequence analysis of bisulphite-treated genomic DNA, we find a strong relationship between hypermethylation of a 385 bp 50 CpG rich island of the Testisin gene, and silencing of the Testisin gene in a range of human tumour cell lines and in 100% (eight/eight) of testicular germ cell tumours. We show that treatment of Testisin-negative cell lines with demethylating agents and/or a histone deacetylase inhibitor results in reactivation of Testisin gene expression, implicating hypermethylation in Testisin gene silencing. Stable expression of Testisin in the Testisin-negative Tera-2 testicular cancer line suppressed tumorigenicity as revealed by inhibition of both anchorage-dependent cell growth and tumour formation in an SCID mouse model of testicular tumorigenesis. Together, these data show that loss of Testisin is caused, at least in part, by DNA hypermethylation and histone deacetylation, and suggest a tumour suppressor role for Testisin in testicular tumorigenesis.

Dam break wave of thixotropic fluid

Thixotropy is the characteristic of a fluid to form a gelled structure over time when it is not subjected to shearing, and to liquefy when agitated. Thixotropic fluids are commonly used in the construction industry (e.g., liquid concrete and drilling fluids), and related applications include some forms of mud flows and debris flows. This paper describes a basic study of dam break wave with thixotropic fluid. Theoretical considerations were developed based upon a kinematic wave approximation of the Saint-Venant equations down a prismatic sloping channel. A very simple thixotropic model, which predicts the basic theological trends of such fluids, was used. It describes the instantaneous state of fluid structure by a single parameter. The analytical solution of the basic flow motion and theology equations predicts three basic flow regimes depending upon the fluid properties and flow conditions, including the initial degree of jamming of the fluid (related to its time of restructuration at rest). These findings were successfully compared with systematic bentonite suspension experiments. The present work is the first theoretical analysis combining the basic principles of unsteady flow motion with a thixotropic fluid model and systematic laboratory experiments.

Effect of adsorption deformation on thermodynamic characteristics of a fluid in slit pores at sub-critical conditions

Solvation. pressure due to adsorption of fluids in porous materials is the cause of elastic deformation of an adsorbent, which is accessible to direct experimental measurements. Such a deformation contributes to the Helmholtz free energy of the whole adsorbent-adsorbate system due to accumulation of compression or tension energy by the solid. It means that in the general case the solid has to be considered as not solely a source of the external potential field for the fluid confined in the pore volume, but also as thermodynamically nonmert component of the solid-fluid system. We present analysis of nitrogen adsorption isotherms and heat of adsorption in slit graphitic pores accounting for the adsorption deformation by means of nonlocal density functional theory. (c) 2006 Elsevier Ltd. All rights reserved.

Subduction of the Nazca Ridge and the Inca Plateau: Insights into the formation of ore deposits in Peru

A large number of ore deposits that formed in the Peruvian Andes during the Miocene (15-5 Ma) are related to the subduction of the Nazea plate beneath the South American plate. Here we show that the spatial and temporal distribution of these deposits correspond with the arrival of relatively buoyant topographic anomalies, namely the Nazca Ridge in central Peru and the now-consumed Inca Plateau in northern Peru, at the subduction zone. Plate reconstruction shows a rapid metallogenic response to the arrival of the topographic anomalies at the subduction trench. This is indicated by clusters of ore deposits situated within the proximity of the laterally migrating zones of ridge subduction. It is accordingly suggested that tectonic changes associated with impingement of the aseismic ridge into the subduction zone may trigger the formation of ore deposits in metallogenically fertile suprasubduction environments. (c) 2005 Elsevier B.V All rights reserved.

Dating paleochannel iron ore by (U-Th)/He analysis of supergene goethite, Hamersley province, Australia

(U-Th)/He dating of late-stage authigenic goethite, combined with corrections for diffusive loss of He-4 by the He-4/He-3 methodology, reveals strong correlation between a sample's age and its depth in ferruginized channel sediments from the Yandicoogina deposit, Western Australia. Corrected ages, ranging from ca. 18 Ma near the surface to ca. 5 Ma at the bottom of the profile, indicate that ferruginization of the aggraded channels becomes progressively younger with depth. This trend is consistent with goethite precipitation at the groundwater-atmosphere interface during water table drawdown driven by the aridification of Western Australia during the Neogene. The results demonstrate that the (U-Th)/He system is ideal for dating goethite if diffusive loss corrections are applied. The approach is suitable for dating weathering reactions on Earth and should also be suitable for dating Fe oxyhydroxides in the Martian regolith.