41 resultados para Impedance based structural health monitoring
em University of Queensland eSpace - Australia
Resumo:
This paper investigates the input-output characteristics of structural health monitoring systems for composite plates based on permanently attached piezoelectric transmitter and sensor elements. Using dynamic piezoelectricity theory and a multiple integral transform method to describe the propagating and scattered flexural waves an electro-mechanical model for simulating the voltage input-output transfer function for circular piezoelectric transmitters and sensors adhesively attached to an orthotropic composite plate is developed. The method enables the characterization of all three physical processes, i.e. wave generation, wave propagation and wave reception. The influence of transducer, plate and attached electrical circuit characteristics on the voltage output behaviour of the system is examined through numerical calculations, both in frequency and the time domain. The results show that the input-output behaviour of the system is not properly predicted by the transducers' properties alone. Coupling effects between the transducers and the tested structure have to be taken into account, and adding backing materials to the piezoelectric elements can significantly improve the sensitivity of the system. It is shown that in order to achieve maximum sensitivity, particular piezoelectric transmitters and sensors need to be designed according to the structure to be monitored and the specific frequency regime of interest.
Resumo:
This study evaluated whether projects conducted through the Access to Allied Health Services component of the Australian Better Outcomes in Mental Health Care initiative are improving access to evidence-based, non-pharmacological therapies for people with depression and anxiety. Synthesising data from the first 29 projects funded through the initiative, the study found that the models utilised in the projects have evolved over time. The projects have achieved a high level uptake; at a conservative estimate, 710 GPs and 160 allied health professionals (AHPs) have provided care to 3,476 consumers. The majority of these consumers have depression (77%) and/or anxiety disorders (55%); many are low income earners (57%); and a number have not previously accessed mental health care (40%). The projects have delivered 8,678 sessions of high quality care to these consumers, most commonly providing CBT-based cognitive and behavioural interventions (55% and 41%, respectively). In general, GPs, AHPs and consumers are sanguine about the projects, and have reported positive consumer outcomes. However, as with any new initiative, there are some practical and professional issues that need to be addressed. The projects are improving access to evidence-based, non-pharmacological therapies. The continuation and expansion of the initiative should be a priority.
Resumo:
Childhood obesity is becoming a topical issue in both the health literature and the popular media and increasingly child health nurses are observing preschool children who appear to be disproportionately heavy for their height when plotted on standardised growth charts. In this paper literature related to childhood obesity in New Zealand and internationally is explored to identify current issues, and the implications of these issues for nurses in community based child health practice are discussed. Themes that emerged from the literature relate to the measurement of obesity, links between childhood and adult obesity and issues for families. A theme in the literature around maternal perception was of particular interest. Studies that investigated maternal perceptions of childhood obesity found that mothers identified their child as being overweight or obese only when it imposed limitations on physical activity or when the children were teased rather than by referring to individual growth graphs. The implications for nursing in the area of child health practice is discussed as nurses working in this area need an understanding of the complex and often emotive issues surrounding childhood obesity and an awareness of the reality of people's lives when devising health promotion strategies.
Resumo:
This paper reports on the development of an artificial neural network (ANN) method to detect laminar defects following the pattern matching approach utilizing dynamic measurement. Although structural health monitoring (SHM) using ANN has attracted much attention in the last decade, the problem of how to select the optimal class of ANN models has not been investigated in great depth. It turns out that the lack of a rigorous ANN design methodology is one of the main reasons for the delay in the successful application of the promising technique in SHM. In this paper, a Bayesian method is applied in the selection of the optimal class of ANN models for a given set of input/target training data. The ANN design method is demonstrated for the case of the detection and characterisation of laminar defects in carbon fibre-reinforced beams using flexural vibration data for beams with and without non-symmetric delamination damage.
Resumo:
Background Reliable information on causes of death is a fundamental component of health development strategies, yet globally only about one-third of countries have access to such information. For countries currently without adequate mortality reporting systems there are useful models other than resource-intensive population-wide medical certification. Sample-based mortality surveillance is one such approach. This paper provides methods for addressing appropriate sample size considerations in relation to mortality surveillance, with particular reference to situations in which prior information on mortality is lacking. Methods The feasibility of model-based approaches for predicting the expected mortality structure and cause composition is demonstrated for populations in which only limited empirical data is available. An algorithm approach is then provided to derive the minimum person-years of observation needed to generate robust estimates for the rarest cause of interest in three hypothetical populations, each representing different levels of health development. Results Modelled life expectancies at birth and cause of death structures were within expected ranges based on published estimates for countries at comparable levels of health development. Total person-years of observation required in each population could be more than halved by limiting the set of age, sex, and cause groups regarded as 'of interest'. Discussion The methods proposed are consistent with the philosophy of establishing priorities across broad clusters of causes for which the public health response implications are similar. The examples provided illustrate the options available when considering the design of mortality surveillance for population health monitoring purposes.
Resumo:
The current trend among many universities is to increase the number of courses available online. However, there are fundamental problems in transferring traditional education courses to virtual formats. Delivering current curricula in an online format does not assist in overcoming the negative effects on student motivation which are inherent in providing information passively. Using problem-based learning (PBL) online is a method by which computers can become a tool to encourage active learning among students. The delivery of curricula via goal-based scenarios allows students to learn at different rates and can successfully shift online learning from memorization to discovery. This paper reports on a Web-based e-health course that has been delivered via PBL for the past 12 months. Thirty distance-learning students undertook postgraduate courses in e-health delivered via the Internet (asynchronous communication). Data collected via online student surveys indicated that the PBL format was both flexible and interesting. PBL has the potential to increase the quality of the educational experience of students in online environments.
Resumo:
Rectangular piezoceramic transducers are widely used in ultrasonic evaluation and health monitoring techniques and structural vibration control applications. In this paper the flexural waves excited by rectangular transducers adhesively attached to isotropic plates are investigated. In view of the difficulties in developing accurate analytical models describing the transfer characteristics of the transducer due to the complex electromechanical transduction processes and transducer-structure interactions involved, a combined theoretical-experimental approach is developed. A multiple integral transform method is used to describe the propagation behaviour of the waves in the plates, while a heterodyne Doppler laser vibrometer is employed as a non-contact receiver device. This combined theoretical-experimental approach enables the efficient characterization of the electromechanical transfer properties of the piezoelectric transducer which is essential for the development of optimized non-destructive evaluation systems. The results show that the assumption of a uniform contact pressure distribution between the transducer and the plate can accurately predict the frequency spectrum and time domain response signals of the propagating waves along the main axes of the rectangular transmitter element.
Resumo:
Two water quality monitoring strategies designed to sample hydrophobic organic contaminants have been applied and evaluated across an expected concentration gradient in PAHs in the Moreton region. Semipermeable membrane devices (SPMDs) that sequester contaminants via passive diffusion across a membrane were used to evaluate the concentration of PAHs at four and five sites in spring and summer 2001/2002, respectively. In addition, induction of hepatic cytochrome P4501, EROD activity, in yellowfin bream, Acanthopagrus australis, captured in the vicinity of SPMD sampling sites following deployment in summer was used as a biomarker of exposure to PAHs and related chemicals. SPMDs identified a clear and reproducible gradient in PAH contamination with levels increasing from east to west in Moreton Bay and upstream in the Brisbane River. The highest PAH concentrations expressed as B(a)P-toxicity equivalents (TEQs) were found in urban areas, which were also furthest upstream and experienced the least flushing. Cytochrome P4501 induction in A. australis was similar at all sites. The absence of clear trends in EROD activity may be attributable to factors not measured in this study or variable residency time of A. australis in contaminated areas. It is also possible that fish in the Moreton region are displaying enzymatic adaptation, which has been reported previously for fish subjected to chronic exposure to organic contaminants. These potential interferences complicate interpretation of EROD activity from feral biota. It is, therefore, suggested that future monitoring combine the two methods by applying passive sampler extracts to in vitro EROD assays. (C) 2004 Elsevier Ltd. All rights reserved.
Resumo:
This paper describes the use of a web-site for the dissemination of the community-based '10,000 steps' program which was originally developed and evaluated in Rockhampton, Queensland in 2001-2003. The website provides information and interactive activities for individuals, and promotes resources and programs for health promotion professionals. The dissemination activity was assessed in terms of program adoption and implementation. In a 2-year period (May 2004-March 2006) more than 18,000 people registered as users of the web-site (togging more than 8.5 billion steps) and almost 100 workplaces and 13 communities implemented aspects of the 10,000 steps program. These data support the use of the internet as an effective means of disseminating ideas and resources beyond the geographical borders of the original project. Following this preliminary dissemination, there remains a need for the systematic study of different dissemination strategies, so that evidence-based physical activity programs can be translated into more widespread public health practice. (c) 2006 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.