Method for determining reaction rate of mild steel containers during melting of magnesium-aluminium alloys and effect of aluminium content on directionally solidified microstructures

A magnesium alloy of eutectic composition (33 wt-'%Al) was directionally solidified in mild steel tubes at two growth rates, 32 and 580 mum s(-1,) in a temperature gradient between 10 and 20 K mm(-1). After directional solidification, the composition of each specimen varied dramatically, from 32'%Al in the region that had remained solid to 18%Al (32 mum s(-1) specimen) and 13%Al (580 mum s(-1) specimen) at the plane that had been quenched from the eutectic temperature. As the aluminium content decreased, the microstructure contained an increasing volume fraction of primary magnesium dendrites and the eutectic morphology gradually changed from lamellar to partially divorced. The reduction in aluminium content was caused by the growth of an Al-Fe phase ahead of the Mg-Al growth front. Most of the growth of the Al-Fe phase occurred during the remelting period before directional solidification. The thickness of the Al-Fe phase increased with increased temperature and time of contact with the molten Mg-Al alloy. (C) 2003 Maney Publishing.

Product warranty logistics: Issues and challenges

Warranty is an important element of marketing new products. The servicing of warranty results in additional costs to the manufacturer. Warranty logistics deals with various issues relating to the servicing of warranty. Proper management of warranty logistics is needed not only to reduce the warranty servicing cost but also to ensure customer satisfaction as customer dissatisfaction has a negative impact on sales and revenue. Unfortunately, warranty logistics has received very little attention. The paper links the literature on warranty and on logistics and then discusses the different issues in warranty logistics. It highlights the challenges and identifies some research topics of potential interest to operational researchers. (C) 2003 Elsevier B.V. All rights reserved.