Water characteristics in cooked beef as influenced by ageing and high-pressure treatment -an NMR micro imaging study

The water characteristics in cooked pressure-heat treated (45 degreesC for 45 min prior to pressurisation at 150 MPa for 30 min) and non-pressurised, cooked (control) samples of beef Longissimus aged for 1, 3, 8 or 16 days were studied by nuclear magnetic resonance microscopy. A multi-echo sequence was used to obtain T2 images, and independent of ageing period, the T2 values were found to be lower in pressure-heat treated meat revealing alterations in water characteristics of pressure-treated, cooked meat compared with cooked meat. With increasing ageing duration, the T2 values in both pressure-treated, cooked and cooked meat decreased indicating that the water became more tightly trapped in the protein network. In addition, independent of length of ageing period the relationship between cooking loss in the cooked meat and transverse relaxation differed between non-pressurised and pressure-treated meat. which reveals that the mechanisms changing the water properties in beef during ageing are different from those occuring during pressure-heat treatment of meat. (C) 2003 Elsevier Ltd. All rights reserved.

Cadmium-induced nephropathy in the development of high blood pressure

In recognition of a central role of the kidney in long-term blood pressure control, we undertook an in-depth analysis of the relationship between blood pressure and kidney damage caused by environmental exposure to the common pollutants cadmium and lead. The subjects were 200 healthy Thais, 16 and 60 years of age (100 female non-smokers, 53 male non-smokers, and 47 male smokers). None of these subjects had been exposed to Cd or Pb in the workplace and their urinary Cd concentrations ranged from 0.4 to 37 nM, whereas their urinary Pb concentrations ranged from 0.1 to 30 nM. The prevalence of high blood pressure was 2%, 8% and 19%, respectively in subjects with low, average and high Cd-burden (linear trend chi(2) = 6.4, P = 0.01). Multiple regression analysis revealed a significant positive association between Cd-burden and blood pressure in male nonsmokers (adjusted beta = 0.31, P = 0.02) and an inverse association between blood pressure and urinary Pb excretion rate in male smokers (adjusted beta = -0.38, P = 0.005). Associations between Cd-burden and nephropathies were evidenced by increases in urinary excretion of beta 2-microglobutin (P = 0.02) and N-acetyl-beta-D-glucosaminidase (P = 0.005) in subjects with high Cd-burden, compared with the subjects with average Cd-burden. In addition, an association between Cd-related nephropathy and high blood pressure was evidenced by a 20% increase in the prevalence of high blood pressure in people with NAG-uria (linear trend chi(2) = 4.3, P = 0.04). Our present study provides first evidence for a possible link between renal tubular damage and dysfunction caused by environmental Cd exposure and increased risk of high blood pressure. (c) 2005 Elsevier Ireland Ltd. All rights reserved.

Combining nonthermal technologies to control foodborne microorganisms

Novel nonthermal processes, such as high hydrostatic pressure (HHP), pulsed electric fields (PEFs), ionizing radiation and ultrasonication, are able to inactivate microorganisms at ambient or sublethal temperatures. Many of these processes require very high treatment intensities, however, to achieve adequate microbial destruction in low-acid foods. Combining nonthermal processes with conventional preservation methods enhances their antimicrobial effect so that lower process intensities can be used. Combining two or more nonthermal processes can also enhance microbial inactivation and allow the use of lower individual treatment intensities. For conventional preservation treatments, optimal microbial control is achieved through the hurdle concept, with synergistic effects resulting from different components of the microbial cell being targeted simultaneously. The mechanisms of inactivation by nonthermal processes are still unclear; thus, the bases of synergistic combinations remain speculative. This paper reviews literature on the antimicrobial efficiencies of nonthermal processes combined with conventional and novel nonthermal technologies. Where possible, the proposed mechanisms of synergy is mentioned. (C) 2003 Elsevier Science B.V. All rights reserved.

Electron beam current loss at the high-vacuum-high-pressure boundary in the environmental scanning electron microscope

A significant loss in electron probe current can occur before the electron beam enters the specimen chamber of an environmental scanning electron microscope (ESEM). This loss results from electron scattering in a gaseous jet formed inside and downstream (above) the pressure-limiting aperture (PLA), which separates the high-pressure and high-vacuum regions of the microscope. The electron beam loss above the PLA has been calculated for three different ESEMs, each with a different PLA geometry: an ElectroScan E3, a Philips XL30 ESEM, and a prototype instrument. The mass thickness of gas above the PLA in each case has been determined by Monte Carlo simulation of the gas density variation in the gas jet. It has been found that the PLA configurations used in the commercial instruments produce considerable loss in the electron probe current that dramatically degrades their performance at high chamber pressure and low accelerating voltage. These detrimental effects are minimized in the prototype instrument, which has an optimized thin-foil PLA design.

A computational study of shock speeds in high-performance shock tubes

This paper describes U2DE, a finite-volume code that numerically solves the Euler equations. The code was used to perform multi-dimensional simulations of the gradual opening of a primary diaphragm in a shock tube. From the simulations, the speed of the developing shock wave was recorded and compared with other estimates. The ability of U2DE to compute shock speed was confirmed by comparing numerical results with the analytic solution for an ideal shock tube. For high initial pressure ratios across the diaphragm, previous experiments have shown that the measured shock speed can exceed the shock speed predicted by one-dimensional models. The shock speeds computed with the present multi-dimensional simulation were higher than those estimated by previous one-dimensional models and, thus, were closer to the experimental measurements. This indicates that multi-dimensional flow effects were partly responsible for the relatively high shock speeds measured in the experiments.

Field observations of instantaneous water slopes and horizontal pressure gradients in the swash-zone

Field observations of instantaneous water surface slopes in the swash zone are presented. For free-surface flows with a hydrostatic pressure distribution the surface slope is equivalent to the horizontal pressure gradient. Observations were made using a novel technique which in its simplest form consists of a horizontal stringline extending seaward from the beach face. Visual observation, still photography or video photography is then sufficient to determine the surface slope where the free-surface cuts the line or between reference points in the image. The method resolves the mean surface gradient over a cross-shore distance of 5 m or more to within +/- 0.001, or 1/20th -1/100th of typical beach gradients. In addition, at selected points and at any instant in time during the swash cycle, the water surface slope can be determined exactly to be dipping either seaward or landward. Close to the location of bore collapse landward dipping water surface slopes of order 0.05-0.1 occur over a very small region (order 0.5 m) at the blunt or convex leading edge of the swash. In the middle and upper swash the water surface slope at this leading edge is usually very close to horizontal or slightly seaward. Behind the leading edge, the water surface slope was observed to be very close to horizontal or dipping seaward at all times throughout the swash uprush. During the backwash the water surface slope was observed to be always dipping seaward, approaching the beach slope, and remained seaward until a new uprush edge or incident bore passed any particular cross-shore location of interest. The observations strongly Suggest that the swash boundary layer is subject to an adverse pressure gradient during uprush and a favourable pressure gradient during the backwash. Furthermore, assuming Euler's equations are a good approximation in the swash, the observations also show that the total fluid acceleration is negative (offshore) for almost the whole of the uprush and for the entire backwash. The observations are contrary to recent work suggesting significant shoreward directed accelerations and pressure gradients occur in the swash (i.e., delta u/delta t > 0 similar to delta p/delta x < 0), but consistent with analytical and numerical solutions for swash uprush and backwash. The results have important implications for sediment transport modelling in the swash zone.

"That is bloody revolting"! Inhibitory control of thoughts better left unsaid

An experiment explored the hypothesis that inhibitory ability helps people stop themselves from engaging in socially inappropriate behavior. All participants completed a Stroop color-naming task, after which half of the participants were asked to remember an eight-digit number (inducing divided attention). Participants were then offered an unfamiliar and visually unappetizing food product (a chicken foot) under conditions of either low or high social pressure to pretend that it was appealing. Participants who had full attention available and were under pressure to pretend the food was appealing were least likely to emit a negative response, and performance on the Stroop task predicted the degree to which they successfully restrained negative responses. These results suggest that the cognitive ability to inhibit unwanted information facilitates socially appropriate behavior.

Expression of resistance by tetraploid and diploid lucerne genotypes to Phytophthora medicaginis is not influenced by inoculum level or by temperature

Phytophthora-resistant lucerne cultivars do not always perform well under conditions of high disease pressure in the field. To determine whether resistance expression remains stable under different infection intensities, tetraploid and diploid lucerne genotypes, genotypically defined for their reactions to Phytophthora medicaginis, were clonally propagated, and the influence of different reproducible inoculum levels (0 . 5 and 5 . 0 g dry weight mycelium/kg dry weight potting mix), the period of exposure to these levels (10-60 days), and temperature (16/22 degrees C and 24/30 degrees C) on disease expression was determined in controlled environments. Generally, expression of resistance by resistant genotypes, remained stable under these conditions. Biotic (e.g. Aphanomyces eutiches) or abiotic factors other than P. medicaginis may be responsible for the poorer than expected performance under field conditions in some instances, or the percentage of resistant plants in some cultivars currently classified as resistant is insufficient to provide buffering against productivity reductions under severe epidemics. Further research is needed to clarify the situation.

The equilibrium penetration of monolayers. Is equilibrium really established?

In studying the penetration of water-soluble surfactants into water-insoluble monolayers the main theoretical problem is to find a relationship that would enable the amount of surfactant that has entered the monolayer to be calculated from a set of equilibrium surface pressure-area isotherms. Despite many attempts, no current theory gives satisfactory results when applied to experimental data (Langmuir 14 (1998) 2148). One possible reason is that equilibrium had not been established when the surface pressure-area curves were measured. The three experiments reported here suggest that equilibrium is extremely difficult to establish in such systems when the area is low or the surface pressure is high. The essence of these experiments is to try to reach the same final condition by two different routes. In the first route, the one nearly always used in equilibrium penetration measurements, the surfactant is injected under the expanded monolayer, which is then slowly compressed in steps, with time allowed at each step for a steady surface pressure to be attained. In the second procedure, the monolayer is first compressed to a high surface pressure and the surfactant then injected. A stepped expansion isotherm may then be observed. Surface pressure-area per monolayer molecule isotherms, reflection spectra, and slow neutron reflectivity data all show the same pattern: if the surfactant was allowed to penetrate while the monolayer was in an expanded state, it was not completely removed when the monolayer was compressed; but if the monolayer was in a highly compressed state when exposed to the surfactant little penetration took place until the film was expanded. There thus appear to be very large energy barriers to the ejection of surfactant from a compressed monolayer and to the penetration of surfactant into a compressed monolayer. Although these experiments have some limitations, it now seems likely that at least some of the penetration data used in evaluating the various thermodynamic treatments of equilibrium penetration were not equilibrium data. (C) 2001 Elsevier Science B.V. All rights reserved.

Lucerne biology and genetic improvement - an analysis of past activities and future goals in Australia

Breeding methodologies for cultivated lucerne (Medicago sativa L.), an autotetraploid, have changed little over the last 50 years, with reliance on polycross methods and recurrent phenotypic selection. There has been, however, an increase in our understanding of lucerne biology, in particular the genetic relationships between members of the M. sativa complex, as deduced by DNA analysis. Also, the differences in breeding behaviour and vigour of diploids versus autotetraploids, and the underlying genetic causes, are discussed in relation to lucerne improvement. Medicago falcata, a member of the M. sativa complex, has contributed substantially to lucerne improvement in North America, and its diverse genetics would appear to have been under-utilised in Australian programs over the last two decades, despite the reduced need for tolerance to freezing injury in Australian environments. Breeding of lucerne in Australia only commenced on a large scale in 1977, driven by an urgent need to introgress aphid resistance into adapted backgrounds. The release in the early 1980s of lucernes with multiple pest and disease resistance (aphids, Phytophthora, Colletotrichum) had a significant effect on increasing lucerne productivity and persistence in eastern Australia, with yield increases under high disease pressure of up to 300% being recorded over the predominant Australian cultivar, up to 1977, Hunter River. Since that period, irrigated lucerne yields have plateaued, highlighting the need to identify breeding objectives, technologies, and the germplasm that will create new opportunities for increasing performance. This review discusses major goals for lucerne improvement programs in Australia, and provides indications of the germplasm sources and technologies that are likely to deliver the desired outcomes.

Genetic shifts in Helicoverpa armigera Hubner (Lepidoptera : Noctuidae) over a year in the Dawson/Callide Valleys

Microsatellites were used to analyse 68 collections of Helicoverpa armigera in the Dawson/Callide Valleys in central Queensland. The study aimed to evaluate the genetic structure in this region over a 12-month period (September 2000-August 2001). The results detected genetic shifts in H. armigera collections, with genetic changes occurring month by month. Collections in any month were genetically distant from the preceding month's collections. There was no observed difference between collections of H. armigera from the Biloela region and those found in the Theodore region of central Queensland. The data support the current area-wide management strategies for H. armigera by reinforcing the importance and contribution of local management practices. The study also indicates a need for the continuation of regional or Australia-wide approaches to management of the low levels of immigration that are occurring, and for future high pest pressure years.

Low-temperature single-crystal Raman and neutron-diffraction study of the hydrogenous ammonium copper(II) tutton salt and the deuterated analogue in the metastable state

Low-temperature (15 K) single-crystal neutron-diffraction structures and Raman spectra of the salts (NX4)(2)[CU(OX2)(6)](SO4)(2), where X = H or D, are reported. This study is concerned with the origin of the structural phase change that is known to occur upon deuteration. Data for the deuterated salt were measured in the metastable state, achieved by application of 500 bar of hydrostatic pressure at similar to303 K followed by cooling to 281 K and the subsequent release of pressure. This allows for the direct comparison between the hydrogenous and deuterated salts, in the same modification, at ambient pressure and low temperature. The Raman spectra provide no intimation of any significant change in the intermolecular bonding. Furthermore, structural differences are few, the largest being for the long Cu-O bond, which is 2.2834(5) and 2.2802(4) Angstrom for the hydrogenous and the deuterated salts, respectively. Calorimetric data for the deuterated salt are also presented, providing an estimate of 0.17(2) kJ/mol for the enthalpy difference between the two structural forms at 295.8(5) K. The structural data suggest that substitution of hydrogen for deuterium gives rise to changes in the hydrogen-bonding interactions that result in a slightly reduced force field about the copper(II) center. The small structural differences suggest different relative stabilities for the hydrogenous and deuterated salts, which may be sufficient to stabilize the hydrogenous salt in the anomalous structural form.

Attitude-behaviour consistency: the role of group norms, attitude accessibility, and mode of behavioural decision-making

The interplay between two perspectives that have recently been applied in the attitude area-the social identity approach to attitude-behaviour relations (Terry & Hogg, 1996) and the MODE model (Fazio, 1990a)-was examined in the present research. Two experimental studies were conducted to examine the role of group norms, group identification, attitude accessibility, and mode of behavioural decision-making in the attitude-behaviour relationship. In Study I (N = 211), the effects of norms and identification on attitude-behaviour consistency as a function of attitude accessibility and mood were investigated. Study 2 (N = 354) replicated and extended the first experiment by using time pressure to manipulate mode of behavioural decision-making. As expected, the effects of norm congruency varied as a function of identification and mode of behavioural decision-making. Under conditions assumed to promote deliberative processing (neutral mood/low time pressure), high identifiers behaved in a manner consistent with the norm. No effects emerged under positive mood and high time pressure conditions. In Study 2, there was evidence that exposure to an attitude-incongruent norm resulted in attitude change only under low accessibility conditions. The results of these studies highlight the powerful role of group norms in directing individual behaviour and suggest limited support for the MODE model in this context. Copyright (C) 2003 John Wiley Sons, Ltd.

Using a problem detection study (PDS) to identify and compare health care provider and consumer views of antihypertensive therapy

The objectives of this study were to ascertain consumer knowledge and behaviour about hypertension and treatment and to compare these with health care providers' perceptions (of 'most' consumers). The design for the study was a problem detection study (PDS): focus groups and then survey. Focus groups and survey participants were convenience samples of consumers, doctors, nurses and pharmacists. The main outcome measures were agreement on a 5-point Likert scale with statements about consumers' knowledge and behaviour about high blood pressure and medication. The survey identified areas of consensus and disagreement between consumers and health providers. While general knowledge and concordance with antihypertensive therapy among consumers was good, consequences such as eye and kidney disease, interactions with herbal medicines, and how to deal with missing a dose were less well known. Side effects were a problem for over one-quarter of participants, and cost was a problem in continuing therapy. Half the consumers had not received sufficient written information. Providers overall disagreed that most consumers have an adequate understanding of the condition. They agreed that most consumers adhere to therapy and can manage medicines; and about their own profession's role in information provision and condition management. Consumers confirmed positive provider behaviour, suggesting opportunities for greater communication between providers about actions taken with their consumers. In conclusion, the PDS methodology was useful in identifying consumer opinions. Differences between consumer and provider responses were marked, with consumers generally rating their knowledge and behaviour above providers' ratings of 'most' consumers. There are clear gaps to be targeted to improve the outcomes of hypertension therapy.