Measuring crime prevention through environmental design

Crime Prevention Through Environmental Design (CPTED) has considerable support among the built environment professions. Yet the underlying assumptions on which it is based have rarely been, effectiveness or efficacy. This paper reports the development and use of a evaluated to assess their of scale that measured the actual levels of incidental CPTED in two residential areas in Gold Coast, Australia. The scale was administered in parallel with a victimization and social attitude survey. Analysis based on the combination of the two suggests that CPTED measures may have some effect on reducing victimization, particularly the kind of CPTED measures that apply to the group of dwellings on a single street, but the effect on fear of crime is surprisingly limited. It also indicates that there is on a single street, but the of potential in the application of such a scale in a wider assessment of the effectiveness of operationalizing CPTED design measures.

Maternal alcohol use disorder and offspring ADHD: disentangling genetic and environmental effects using a children-of-twins design

Background. Children of alcoholics are significantly more likely to experience high-risk environmental exposures, including prenatal substance exposure, and are more likely to exhibit externalizing problems [e.g. attention deficit hyperactivity disorder (ADHD)]. While there is evidence that genetic influences and prenatal nicotine and/or alcohol exposure play separate roles in determining risk of ADHD, little has been done on determining the joint roles that genetic risk associated with maternal alcohol use disorder (AUD) and prenatal risk factors play in determining risk of ADHD. Method. Using a children-of-twins design, diagnostic telephone interview data from high-risk families (female monozygotic and dizygotic twins concordant or discordant for AUD as parents) and control families targeted from a large Australian twin cohort were analyzed using logistic regression models. Results. Offspring of twins with a history of AUD, as well as offspring of non-AUD monozygotic twins whose co-twin had AUD, were significantly more likely to exhibit ADHD than offspring of controls. This pattern is consistent with a genetic explanation for the association between maternal AUD and increased offspring risk of ADHD. Adjustment for prenatal smoking, which remained significantly predictive, did not remove the significant genetic association between maternal AUD and offspring ADHD. Conclusions. While maternal smoking during pregnancy probably contributes to the association between maternal AUD and offspring ADHD risk, the evidence for a significant genetic correlation suggests: (i) pleiotropic genetic effects, with some genes that influence risk of AUD also influencing vulnerability to ADHD; or (ii) ADHD is a direct risk-factor for AUD.

A Review of the Environmental and Health Effects of Termiticides under Australian Conditions

There exists a major cost issue as regards termite damage to wooden structures. A factor in this cost has been the increasing trend towards slab-on-ground construction. Current literature has been reviewed in relation to concerns about the possible public/environmental health consequences of the repeated use of termiticides in large quantities. The previous, current and projected future use patterns of termiticides are reviewed in the context of techniques appropriate for termite control and treatment priorities. The phasing out of organochlorine termiticides in Australia was undertaken to minimise impact of these substances on the environment and to a lesser extent on public health. These persistent chemicals were replaced by substances with high activity but relatively low persistence in the soil. There has also been an increase in the use of alternative methods (e.g. physical barriers) for the control of termites. The transition away from organochlorine termiticides has led to a realisation that significant information gaps exist with regard to replacement chemicals and other technologies. Although relatively persistent, the organochlorine chemicals have a limited lifespan in soils. Their concentrations are gradually attenuated by processes such as transport away from the point of application and biodegradation. Wooden structures originally treated with these substances will, with the passing of time, be at risk of termite infestation. The only available option is re-treatment with chemicals currently registered for termite control. Thus, there are likely to be substantial future increases associated with the cost of re-treatment and repairs of older slab-on-ground dwellings. More information is required on Australian termite biology, taxonomy and ecology. The risks of termite infestation need to be evaluated, both locally and nationally so that susceptible or high risk areas, structures and building types can be identified and preventive measures taken in terms of design and construction. Building regulations and designs need to be able to reduce or eliminate high-risk housing; and eliminate or reduce conditions that are attractive to termites and/or facilitate termite infestation.

The design and implementation of a repository for the management of spatial data integrity constraints

This paper reviews the key features of an environment to support domain users in spatial information system (SIS) development. It presents a full design and prototype implementation of a repository system for the storage and management of metadata, focusing on a subset of spatial data integrity constraint classes. The system is designed to support spatial system development and customization by users within the domain that the system will operate.

Determination of lifter design, speed and filling effects in AG mills by 3D DEM

The power required to operate large gyratory mills often exceeds 10 MW. Hence, optimisation of the power consumption will have a significant impact on the overall economic performance and environmental impact of the mineral processing plant. In most of the published models of tumbling mills (e.g. [Morrell, S., 1996. Power draw of wet tumbling mills and its relationship to charge dynamics, Part 2: An empirical approach to modelling of mill power draw. Trans. Inst. Mining Metall. (Section C: Mineral Processing Ext. Metall.) 105, C54-C62. Austin, L.G., 1990. A mill power equation for SAG mills. Miner. Metall. Process. 57-62]), the effect of lifter design and its interaction with mill speed and filling are not incorporated. Recent experience suggests that there is an opportunity for improving grinding efficiency by choosing the appropriate combination of these variables. However, it is difficult to experimentally determine the interactions of these variables in a full scale mill. Although some work has recently been published using DEM simulations, it was basically. limited to 2D. The discrete element code, Particle Flow Code 3D (PFC3D), has been used in this work to model the effects of lifter height (525 cm) and mill speed (50-90% of critical) on the power draw and frequency distribution of specific energy (J/kg) of normal impacts in a 5 m diameter autogenous (AG) mill. It was found that the distribution of the impact energy is affected by the number of lifters, lifter height, mill speed and mill filling. Interactions of lifter design, mill speed and mill filling are demonstrated through three dimensional distinct element methods (3D DEM) modelling. The intensity of the induced stresses (shear and normal) on lifters, and hence the lifter wear, is also simulated. (C) 2004 Elsevier Ltd. All rights reserved.