Determination of external and internal mass transfer limitation in nitrifying microbial aggregates

In this article we present a study of the effects of external and internal mass transfer limitation of oxygen in a nitrifying system. The oxygen uptake rates (OUR) were measured on both a macro-scale with a respirometric reactor using off-gas analysis (Titrimetric and Off-Gas Analysis (TOGA) sensor) and on a micro-scale with microsensors. These two methods provide independent, accurate measurements of the reaction rates and concentration profiles around and in the granules. The TOGA sensor and micro-sensor measurements showed a significant external mass transfer effect at low dissolved oxygen (DO) concentrations in the bulk liquid while it was insignificant at higher DO concentrations. The oxygen distribution with anaerobic or anoxic conditions in the center clearly shows major mass transfer limitation in the aggregate interior. The large drop in DO concentration of 22 - 80% between the bulk liquid and aggregate surface demonstrates that the external mass transfer resistance is also highly important. The maximum OUR even for floccular biomass was only attained at much higher DO concentrations ( approximate to 8 mg/L) than typically used in such systems. For granules, the DO required for maximal activity was estimated to be > 20mg/L, clearly indicating the effects of the major external and internal mass transfer limitations on the overall biomass activity. Smaller aggregates had a larger volumetric OUR indicating that the granules may have a lower activity in the interior part of the aggregate. (C) 2004 Wiley Periodicals, Inc.

Frequency of insomnia report in patients with obstructive sleep apnoea hypopnea syndrome (OSAHS)

Background and purpose: Insomnia and Obstructive Sleep Apnoea Hypopnea Syndrome (OSAHS) are the two most common sleep disorders, and both have significant associated health costs. Despite this, relatively little is known about the prevalence or impact of insomnia in those with OSAHS, although a recent study suggested there may be substantial comorbidity between these disorders [Chest 120 (2001) 1923-9]. The primary aim of this study was to further explore the prevalence of insomnia in OSAHS. A secondary aim was to assess the effect of factors that may impact on both conditions, including mood and sleep-beliefs. Patients and methods: Consecutive patients referred to an accredited Sleep Investigations Unit (n = 105) completed a brief standardized battery of validated questionnaires assessing sleep-related variables and mood. Results: Results showed a high rate of prevalence of clinical insomnia in this OSAHS population, and a strong positive correlation between OSAHS and insomnia symptom severity. Further, OSAHS patients with comorbid insomnia had increased levels of depression, anxiety and stress compared to patients with OSAHS-only, and both patient groups reported similar and significant levels of dysfunctional beliefs about sleep. Findings in relation to habitual sleep, assessed using subjective (diary) and objective criteria (polysomnogram), were mixed but generally showed greater sleep disturbance among those with OSAHS-insomnia compared to those with OSAHS-only. Conclusions: Overall these findings suggest that comorbidity of insomnia in OSAHS patients may lead to increased OSAHS severity and that patients with both conditions may experience more symptoms relating to depression, anxiety and stress. These findings underscore the need for insomnia assessment and management services, even in clinics that primarily service patients with OSAHS. (C) 2004 Elsevier B.V. All rights reserved.

Evidence-based medicine is affordable: The cost-effectiveness of current compared with optimal treatment in rheumatoid and osteoarthritis

Objective. To determine the cost-effectiveness of averting the burden of disease. We used secondary population data and metaanalyses of various government-funded services and interventions to investigate the costs and benefits of various levels of treatment for rheumatoid arthritis (RA) and osteoarthritis (OA) in adults using a burden of disease framework. Method. Population burden was calculated for both diseases in the absence of any treatment as years lived with disability (YLD), ignoring the years of life lost. We then estimated the proportion of burden averted with current interventions, the proportion that could be averted with optimally implemented cut-rent evidence-based guidelines, and the direct treatment cost-effectiveness ratio in dollars per YLD averted for both treatment levels. Results. The majority of people with arthritis sought medical treatment. Current treatment for RA averted 26% of the burden, with a cost-effectiveness ratio of $19,000 per YLD averted. Optimal, evidence-based treatment would avert 48% of the burden. with a cost-effectiveness ratio of $12,000 per YLD averted. Current treatment of OA in Australia averted 27% of the burden, with a cost-effectiveness ratio of $25,000 per YLD averted. Optimal, evidence-based treatment would avert 39% of the burden, with an unchanged cost-effectiveness ratio of $25,000 per YLD averted. Conclusion. While the precise dollar costs in each country will differ, the relativities at this level of coverage should remain the same. There is no evidence that closing the gap between evidence and practice would result in a drop in efficiency.

Heparin-induced thrombocytopenia: recent experience in a large teaching hospital

Background: Heparin-induced thrombocytopenia (HIT) is a potentially serious adverse reaction caused by platelet-activating antibodies. Aim: To describe experience with HIT. Methods: Twenty-two patients identified by laboratory records of heparin-associated antibodies with a 50% or greater decrease in platelet count were reviewed in our 600-bed metropolitan teaching hospital from 1999 to April 2005. Results: There was an increase in the frequency of HIT diagnosed during the review period, which was associated with a rise in the number of requests for HIT antibodies. Thrombotic complications were identified in 14 of 22 patients with HIT. Mean age was 65 years, and 11 patients were men. Seven patients died and HIT was considered contributory in four. One patient required mid-forearm amputation. Unfractionated heparin was used in all cases and five patients also received enoxaparin. Mean time to HIT screen, reflecting when the diagnosis was first suspected, was 14 days. Platelet nadir ranged from 6 x 10(9)/L to 88 x 10(9)/L, with a percentage drop in platelet count of 67-96%. Alternative anticoagulation (danaparoid) was not used in three patients, two of whom died. Conclusions: HIT is a potentially life-threatening complication of heparin therapy, associated with a fall in platelet count and a high incidence of thromboembolic complications. It is most frequently seen using unfractionated heparin therapy. The increase in frequency of HIT diagnosed in our hospital appears to be associated with a greater awareness of the entity, although detection is often delayed. Platelet count should be monitored in patients on heparin and the presence of antiplatelet antibodies determined if HIT is suspected. Treatment involves both discontinuation of heparin and the use of an alternative anticoagulant such as danaparoid because of the persisting risk of thrombosis.

A low-complexity lattice-based low-PAR transmission scheme for DSL channels

This paper presents a new low-complexity multicarrier modulation (MCM) technique based on lattices which achieves a peak-to-average power ratio (PAR) as low as three. The scheme can be viewed as a drop in replacement for the discrete multitone (DMT) modulation of an asymmetric digital subscriber line modem. We show that the lattice-MCM retains many of the attractive features of sinusoidal-MCM, and does so with lower implementation complexity, O(N), compared with DMT, which requires O(N log N) operations. We also present techniques for narrowband interference rejection and power profiling. Simulation studies confirm that performance of the lattice-MCM is superior, even compared with recent techniques for PAR reduction in DMT.

Audit of consultant physicians' reply letters for referrals to clinics in a tertiary teaching hospital

Background: Doctors referring patients to consultant physicians seek reply letters which both educate and assist in ongoing patient management. Highly desirable attributes in specialist letters include clearly stated and justified: (i) diagnostic formulations, (ii) management regimens, (iii) use of clinical investigations, (iv) prog-nostic statements, (v) contingency plans and (vi) follow-up arrangements. Aim: To explicitly evaluate the quality of reply letters for new patients referred to clinics at a tertiary teaching hospital. Methods: Letters were sampled from outpatient clinics of 10 different medical specialties at Princess Alexandra Hospital in Brisbane, Australia. Reply letters for new patient referrals between 1 August 2000 and 31 October 2000 were retrieved, from which data were abstracted to calculate the proportion of letters satisfying prespecified quality attributes. Results: Of 297 new patient referrals, reply letters were retrieved for 204 (69%). Of these, 147 (72%) referrals were accompanied by a referral letter, mostly (113/147; 77%) from general practitioners. For 120 referrals involving diagnostic issues, 69 (56%) letters stated a diagnostic formulation. Of 114 letters recommending further clinical investigations, 61 (53%) described a rationale for such testing. In 125 cases where therapy was a key issue, 83 (66%) letters recommended changes to current treatment for which reasons were specified in 46 (55%) cases, and contingency plans provided in 13 (16%). Prognosis was mentioned in only 18 (9%) cases. Follow-up arrangements were detailed in 123 (60%) letters. Assessments of patient understanding and likely adherence to therapy were stated in less than 15% of -letters. Conclusions: Opportunities exist for improving quality of consultant physicians' reply letters in terms of greater use of problem lists, contingency plans, prognostic statements and patient-centred assessments, as well as more frequent enunciation of consultants' reasoning behind requests for further tests and changes to current management. Use of structured letter templates may facilitate more consistent inclusion of key information to referring doctors.

Skin cancer clinics in Australia: workload profile and performance indicators from an analysis of billing data

Objective: To describe the workload profile in a network of Australian skin cancer clinics. Design and setting: Analysis of billing data for the first 6 months of 2005 in a primary-care skin cancer clinic network, consisting of seven clinics and staffed by 20 doctors, located in the Northern Territory, Queensland and New South Wales. Main outcome measures: Consultation to biopsy ratio (CBR); biopsy to treatment ratio (BTR); number of benign naevi excised per melanoma (number needed to treat [NNT]). Results: Of 69780 billed activities, 34 622 (49.6%) were consultations, 19 358 (27.7%) biopsies, 8055 (11.5%) surgical excisions, 2804 (4.0%) additional surgical repairs, 1613 (2.3%) non-surgical treatments of cancers and 3328 (4.8%) treatments of premalignant or non-malignant lesions. A total of 6438 cancers were treated (116 melanomas by excision, 4709 non-melanoma skin cancers [NMSCs] by excision, and 1613 NMSCs non-surgically); 5251 (65.2%) surgical wounds were repaired by direct suture, 2651 (32.9%) by a flap (of which 44.8% were simple flaps), 42 (0.5%) by wedge excision and 111 (1.4%) by grafts. The CBR was 1.79, the BTR was 3.1 and the NNT was 28.6. Conclusions: In this network of Australian skin cancer clinics, one in three biopsies identified a skin cancer (BTR, 3.1), and about 29 benign lesions were excised per melanoma (NNT, 28.6). The estimated NNT was similar to that reported previously in general practice. More data are needed on health outcomes, including effectiveness of treatment and surgical repair.

The effect of elasticity on drop creation in T-shaped microchannels

Polymeric microdrops of low viscosity, elastic fluids have been generated in T-shaped microfluidic devices using a cross-flow shear-induced drop generation process. Dilute (c/c* similar to 0.5) aqueous solutions of polyethylene oxide (PEO) of various molecular weights (3 x 10(5) -2 x 10(6) g/mol) were used as the drop phase fluids whilst silicone oils (5 mPa s