Making the link between engineering management and undergraduate research

This paper describes and analyses an innovative engineering management course that applies a project management framework in the context of a feasibility study for a prospective research project. The aim is to have students learn aspects of management that will be relevant from the outset of their professional career while simultaneously having immediate value in helping them to manage a research project and capstone design project in their senior year. An integral part of this innovation was the development of a web-based project management tool. While the main objectives of the new course design were achieved, a number of important lessons were learned that would guide the further development and continuous improvement of this course. The most critical of these is the need to achieve the optimum balance in the mind of the students between doing the project and critically analyzing the processes used to accomplish the work.

The International Consortium on Mental Health Policy and Services: objectives, design and project implementation

The concept of the burden of disease, introduced and estimated for a broad range of diseases in the World Bank report of 1993 illustrated that mental and neurological disorders not only entail a higher burden than cancer, but are responsible, in developed and developing countries, for more than 15% of the total burden of all diseases. As a consequence, over the past decade, mental disorders have ranked increasingly highly on the international agenda for health. However, the fact that mental health and nervous system disorders are now high on the international health agenda is by no means a guarantee that the fate of patients suffering from these disorders in developing countries will improve. In most developing countries the treatment gap for mental and neurological disorders is still unacceptably high. To address this problem, an international network of collaborating institutions in low-income countries has been set up. The establishment and the achievements of this network-the International Consortium on Mental Health Policy and Services-are reported. Sixteen institutions in developing countries collaborate (supported by a small number of scientific resource centres in industrialized nations) in projects on applied mental health systems research. Over a two-year period, the network produced the key elements of a national mental health policy; provided tools and methods for assessing a country's current mental health status (context, needs and demands, programmes, services and care and outcomes); established a global network of expertise, i.e., institutions and experts, for use by countries wishing to reform their mental health policy, services and care; and generated guidelines and examples for upgrading mental health policy with due regard to the existing mental health delivery system and demographic, cultural and economic factors.

Research, knowledge and design

The discussion about relations between research and design has a number of strands, and presumably motivations. Putting aside the question whether or not design or “creative endeavour” should be counted as research, for reasons to do with institutional recognition or reward, the question remains how, if at all, is design research? This question is unlikely to have attracted much interest but for matters external to Architecture within the modern university. But Architecture as a discipline now needs to understand research much better than in the past when ‘research’ was whatever went on in building science, history or people/environment studies. In this paper, I begin with some common assumptions about design, considered in relation to research, and suggest how the former can constitute or be a mode of the latter. Central to this consideration is an understanding of research as the production of publicly available knowledge. The method is that of conceptual analysis which is much more fruitful than is usually appreciated. This work is part of a larger project in philosophy of design, in roughly the analytical tradition.

A Step-by-Step Approach to Transit Oriented Development Project Delivery

A major challenge in successfully implementing transit-oriented development (TOD) is having a robust process that ensures effective appraisal, initiation and delivery of multi-stakeholder TOD projects. A step-by step project development process can assist in the methodic design, evaluation, and initiation of TOD projects. Successful TOD requires attention to transit, mixed-use development and public space. Brisbane, Australia provides a case-study where recent planning policies and infrastructure documents have laid a foundation for TOD, but where barriers lie in precinct level planning and project implementation. In this context and perhaps in others, the research effort needs to shift toward identification of appropriate project processes and strategies. This paper presents the outcomes of research conducted to date. Drawing on the mainstream approach to project development and financial evaluation for property projects, key steps for potential use in successful delivery of TOD projects have been identified, including: establish the framework; location selection; precinct context review; preliminary precinct design; the initial financial viability study; the decision stage; establishment of project structure; land acquisition; development application; and project delivery. The appropriateness of this mainstream development and appraisal process will be tested through stakeholder research, and the proposed process will then be refined for adoption in TOD projects. It is suggested that the criteria for successful TOD should be broadened beyond financial concerns in order to deliver public sector support for project initiation.

The Australian Universities Teaching Committee project in 'Learning Outcomes and Curriculum Development in Psychology'

The Australian Universities Teaching Committee (AUTC) funds projects intended to improve the quality of teaching and learning in specific disciplinary areas. The project brief for 'Learning Outcomes and Curriculum Development in Psychology' for 2004/2005 was to 'produce an evaluative overview of courses ... with a focus on the specification and assessment of learning outcomes and ... identify strategic directions for universities to enhance teaching and learning'. This project was awarded to a consortium from The University of Queensland, University of Tasmania, and Southern Cross University. The starting point for this project is an analysis of the scientist-practitioner model and its role in curriculum design, a review of current challenges at a conceptual level, and consideration of the implications of recent changes to universities relating to such things as intemationalisation of programs and technological advances. The project will seek to bring together stakeholders from around the country in order to survey the widest possible range of perspectives on the project brief requirements. It is hoped also to establish mechanisms for fiiture scholarly discussion of these issues, including the establishment of an Australian Society for the Teaching of Psychology and an annual conference.

Smoking and relative body weight: An international perspective from the WHO MONICA project

Study objective-To investigate the magnitude and consistency of the associations between smoking and body mass index (BMI) in different populations. Design-A cross sectional study. Setting and participants-About 69000 men and women aged 35-64 years from 42 populations participating in the first WHO MONICA survey in the early and mid 1980s. Main restults-Compared to never smokers, regular smokers had significantly (p < 0.05) lower median BMI in 20 (men) and 30 (women) out of 42 populations (range -2.9 to 0.5kg/m(2)). There was no population in which smokers had a significantly higher BMI than never smokers. Among men, the association between leanness and smoking was less apparent in populations with relatively low proportions of regular smokers and high proportions of ex-smokers. Ex-smokers had significantly higher BMI than never smokers in 10 of the male populations but in women no consistent pattern was observed. Adjustment for socioeconomic status did not affect these results. Conclusions-Although in most populations the association between smoking and BMI is similar, the magnitude of this association may be affected by the proportions of smokers and ex-smokers in these populations.

CDT, GGT, and AST as markers of alcohol use: The WHO/ISBRA Collaborative Project

Background: Estimates of the performance of carbohydrate deficient transferrin (CDT) and gamma glutamyltransferase (GGT) as markers of alcohol consumption have varied widely. Studies have differed in design and subject characteristics. The WHO/ISBRA Collaborative Study allows assessment and comparison of CDT, GGT, and aspartate aminotransferase (AST) as markers of drinking in a large, well-characterized, multicenter sample. Methods: A total of 1863 subjects were recruited from five countries (Australia, Brazil, Canada, Finland, and Japan). Recruitment was stratified by alcohol use, age, and sex. Demographic characteristics, alcohol consumption, and presence of ICD-10 dependence were recorded using an interview schedule based on the AUDADIS, CDT was assayed using CDTect(TM) and GGT and AST by standard methods. Statistical techniques included receiver operating characteristic (ROC) analysis. Multiple regression was used to measure the impact of factors other than alcohol on test performance. Results: CDT and GGT had comparable performance on ROC analysis, with AST performing slightly less well. CDT was a slightly but significantly better marker of high-risk consumption in men. All were more effective for detection of high-risk rather than intermediate-risk drinking. CDT and GGT levels were influenced by body mass index, sex, age, and smoking status. Conclusions: CDT was little better than GGT in detecting high- or intermediate-risk alcohol consumption in this large, multicenter, predominantly community-based sample. As the two tests are relatively independent of each other, their combination is likely to provide better performance than either test alone, Test interpretation should take account sex, age. and body mass index.

Asthma management by New Zealand pharmacists: a pharmaceutical care demonstration project

Background: Pharmaceutical care services became recognized in New Zealand in the mid-1990s, albeit with limited evidence of the acceptability and effectiveness of the model. An asthma-specific pharmaceutical care service was trialled in southern New Zealand, based on a 'problem-action-outcome' method, with pharmacists adopting a patient-centred, outcome-focused approach with multidisciplinary consultation. Objective: To report on the implementation and outcomes of a specialist asthma service offered by community pharmacists. Design: Pharmacists in five pharmacies, servicing predominantly rural, established clientele, received training in the asthma service and research documentation. Ten patients per pharmacy were recruited in each year (years 1 and 2) of the study. The patients were entered into the study in cohorts of five per pharmacy twice yearly, with year 2 mirroring year 1. The phase-in design minimized the impact on the pharmacists. The patients acted as their own controls. All patients received individualized care and had approximately monthly consultations with the pharmacist, with clinical and quality of life (QoL) monitoring. Results: A total of 100 patients were recruited. On average, 4.3 medication-related problems were identified per patient; two-thirds of them were compliance-related. The most common interventions were revision of patients' asthma action plans, referral and medication counselling. Clinical outcomes included reduced bronchodilator use and improved symptom control in around two-thirds of patients. Asthma-specific QoL changes were more positive and correlated well with clinical indicators. Conclusion: Further research is warranted to integrate this service into daily practice. Clinical outcomes were generally positive and supported by QoL indicators. Characteristics of New Zealand practice and this sample of pharmacies may limit the generalizability of these findings.

Protective Eyewear Promotion: Applying Principles of Behaviour Change in the Design of a Squash Injury Prevention Programme

Eye injuries in squash have the potential to be severe. Although these injuries can be prevented through the use of protective eyewear, few players wear such eyewear. The aim of this paper is, to outline the behavioural principles guiding the design of a squash eyewear promotion initiative, the Protective Eyewear Promotion (PEP). Ecological principles of behaviour change were used to provide a comprehensive perspective on intrapersonal factors, policies and physical environmental influences of protective eyewear use. Results of baseline player surveys and venue manager inter-views were used to provide relevant and specific intervention content. At baseline, protective eyewear was not found to be readily available, and players' behaviours, knowledge and attitudes did not favour its use. The main components of PEP involved informing and educating both players and squash venue operators of the risk of eye injury and of appropriate protective eyewear, as well as assisting with the availability of the eyewear and offering incentives for players to use it. A structural strength of PEP was the strong collaborative links with the researchers of different disciplines, the squash governing body, eyewear manufacturers, squash venue personnel, as well as players. Attempts were made within the project structure to make provision for the future dissemination and sustainability of more widespread eye injury prevention measures in the sport of squash.

A laboratory experiment, based on the maillard reaction, conducted as a project in introductory statistics

A simple laboratory experiment, based on the Maillard reaction, served as a project in Introductory Statistics for undergraduates in Food Science and Technology. By using the principles of randomization and replication and reflecting on the sources of variation in the experimental data, students reinforced the statistical concepts and techniques introduced to them in lectures before the experiment. The experiment was run simultaneously by several student groups, using the same materials. Comparing the results of their analyses of variance, students became aware of the difference between P values and significance levels in making statistical decisions. In the experiment, the complete randomized design was applied; however, it is easy to adjust the experiment to teach students simple regression and randomized block designs.

Design for sampling - preliminary exploration

A modern mineral processing plant represents a substantial investment. During the design process, there is often a period when costs (or revenues) must be compensated for by cuts in capital expenditure. In many cases, sampling and measurement equipment provides a soft target for such 'savings'. This process is almost analgous to reducing the capital investment in a corner store by not including a cash register. The consequences will be quite similar - a serious lack of sound performance data and plenty of opportunities for theft - deliberate or inadvertent. This paper makes the case that investment in sampling and measurement equipment is more cost-effective during the design phase. Further, a strong measurement culture will have many benefits including the ability to take advantage of small gains. In almost any business, there are many more opportunities to make small gains than to make large, step changes. In short, if a project cannot justify the cost of accurate and reliable measurement of its performance, it probably should not be a project at all.

Balancing curriculum processes and content in a project centred curriculum - In pursuit of graduate attributes

Chemical engineering education is challenged around the world by demands and rapid changes encompassing a wide range of technical and social drivers. Graduates must be prepared for practice in increasingly diverse workplace environments in which generic or transferable attributes such as communication and teamwork together with technical excellence are mandated by prospective employers and society at large. If academe is to successfully deliver on these graduate attributes, effective curriculum design needs to include appropriate educational processes as well as course content. Conventional teacher centred approaches, stand-alone courses and retro-fitted remedial modules have not delivered the desired outcomes. Development of the broader spectrum of attributes is more likely when students are engaged with realistic and relevant experiences that demand the integration and practice of these attributes in contexts that the students find meaningful. This paper describes and evaluates The University of Queensland's Project Centred Curriculum in Chemical Engineering (PCC), a programme-wide approach to meeting these requirements. PCC strategically integrates project-based learning with more traditional instruction. Data collected shows improved levels of student attainment of generic skills with institutional and nationally benchmarked indicators showing significant increases in student perceptions of teaching quality, and overall satisfaction with the undergraduate experience. Endorsements from Australian academic, professional and industry bodies also support the approach as more effectively aligning engineering education with professional practice requirements.

Future Engineers Australia Management Project: Turning high school students into engineering entrepreneurs

There has been a strong move towards entrepreneurial education in high schools and at universities over the past few years. This has been echoed by a call from state governments around Australia to promote enterprise thinking and education in high schools. It also parallels the push within engineering to learn across the traditional boundaries , particularly between engineering and business. To meet this call, The Engineering Link Group (TELG) developed the Future Engineers Australia Management Project (FEAMP) in 2003. The project is based around Enterprise Education, and was inspired by the Smallpeice Year 12 Engineering Management course in the UK. The idea was to take high school students in years 11 and 12 and turn them into ‘engineering entrepreneurs’. This paper presents the design, development and evaluation of FEAMP as a five day residential course for year 11 and 12 students who want to learn more about being entrepreneurs and managers. It is a hands-on activity where the students invent, develop and sell an engineering concept to venture capitalists and ultimately to customers at a trade fair. It has been run successfully for two years, going from strength to strength. © 2005, Australasian Association for Engineering Education

A participatory design agenda for ubiquitous computing and multimodal interaction: A case study of dental practice

This paper reflects upon our attempts to bring a participatory design approach to design research into interfaces that better support dental practice. The project brought together design researchers, general and specialist dental practitioners, the CEO of a dental software company and, to a limited extent, dental patients. We explored the potential for deployment of speech and gesture technologies in the challenging and authentic context of dental practices. The paper describes the various motivations behind the project, the negotiation of access and the development of the participant relationships as seen from the researchers' perspectives. Conducting participatory design sessions with busy professionals demands preparation, improvisation, and clarity of purpose. The paper describes how we identified what went well and when to shift tactics. The contribution of the paper is in its description of what we learned in bringing participatory design principles to a project that spanned technical research interests, commercial objectives and placing demands upon the time of skilled professionals. Copyright © 2010 ACM, Inc

Design for Inspiration: Children, personal connections and educational technology

The project is working towards building an understanding of the personal interests and experiences of children with the aim of designing appropriate, usable and, most importantly, inspirational educational technology. kidprobe, an adaptation of the technology probe concept, has been used as a lightweight method of gaining contextual information about children's interactions with 'fun' technology. kidprobe has produced design inspiration which focuses primarily on the social and emotional connections children made. The use of kidprobe has generated some important ideas for improving the use of probes with children. It is an important first step in understanding how to effectively adapt probing techniques to inspire the design of technology for children.