Concepts and tools for comprehensive sustainability assessments for tourism destinations: a comparative review

This paper reviews a wide range of tools for comprehensive sustainability assessments at whole tourism destinations, covering socio-cultural, economic and environmental issues. It considers their strengths, weaknesses and site specific applicability. It is intended to facilitate their selection (and combination where necessary). Tools covered include Sustainability Indicators, Environmental Impact Assessment, Life Cycle Assessment, Environmental Audits, Ecological Footprints, Multi-Criteria Analysis and Adaptive Environmental Assessment. Guidelines for evaluating their suitability for specific sites and situations are given as well as examples of their use.

A comprehensive study on carbon dioxide reforming of methane over Ni/gamma-Al2O3 catalysts

Carbon dioxide reforming of methane into syngas over Ni/gamma-Al2O3 catalysts was systematically studied. Effects of reaction parameters on catalytic activity and carbon deposition over Ni/gamma-Al2O3 catalysts were investigated. It is found that reduced NiA1204, metal nickel, and active species of carbon deposited were the active sites for this reaction. Carbon deposition on Ni/gamma Al2O3 varied depending on the nickel loading and reaction temperature and is the major cause of catalyst deactivation. Higher nickel loading produced more coke on the catalysts, resulting in rapid deactivation and plugging of the reactor. At 5 wt % Ni/gamma-Al2O3 catalyst exhibited high activity and much lesser magnitude of deactivation in 140 h. Characterization of carbon deposits on the catalyst surface revealed that there are two kinds of carbon species (oxidized and -C-C-) formed during the reaction and they showed different reactivities toward hydrogenation and oxidation. Kinetic studies showed that the activation energy for CO production in this reaction amounted to 80 kJ/mol and the rate of CO production could be described by a Langmuir-Hinshelwood model.

Lessons from a comprehensive clinical audit of users of psychiatric services who committed suicide

Objective: Characteristics of patients who committed suicide were examined to provide a picture of the treatment they received before death and to determine whether and how the suicides could have been pre vented by the service system. Methods: The unnatural-deaths register was matched to the psychiatric case register in the state of Victoria in Australia to identify suicides by people with a history of public-sector psychiatric service use who committed suicide between July 1, 1989, and June 30, 1994. Data on patient and treatment characteristics were examined by three experienced clinicians, who made judgments about whether the suicide could have been prevented had the service system responded differently. Quantitative and qualitative data were descriptively analyzed. Results: A total of 629 psychiatric patients who had committed suicide were identified. Seventy-two percent of the patients were male, 62 percent were under 40 years old, and 51 percent were unmarried. They had a range of disorders, with the most common being schizophrenia or schizoaffective disorder (36 percent). Sixty-seven percent had previously attempted suicide. A total of 311 patients (49 percent) received care within four weeks of death. Twenty percent of the suicides were considered preventable. Key factors associated with preventability were poor staff-patient relationships, incomplete assessments, poor assessment and treatment of depression and psychological problems, and poor continuity of care. Conclusions: Opportunities exist for the psychiatric service system to alter practices at several levels and thereby reduce patient suicides.

Comprehensive structural characterization of MCM-41: From mesopores to particles

In the present work the meso- and macro-structural characteristics of the mesoporous adsorbent MCM-41 have been estimated with the help of various techniques. The structure is found to comprise four different length scales: that of the mesopores, the crystallites, the grains and of the particles. It was found that the surface area estimated by the use of small angle scattering techniques is higher, while that estimated by mercury porosimetry is much lower, than that obtained from gas adsorption methods. Based on the macropore characterization by mercury porosimetry, and the considerable macropore area determined, it is seen that the actual mesopore area of MCM-41 may be significantly lower than the BET area. TEM studies indicated that MCM-41 does not have an ideal mesopore structure; however, it may still be treated as a model mesoporous material for gas adsorption studies because of the large radius of curvature of the channels.

Comprehensive study of surface chemistry of MCM-41 using Si-29 CP/MAS NMR, FTIR, pyridine-TPD, and TGA

A comprehensive study was conducted on mesoporous MCM-41. Spectroscopic examinations demonstrated that three types of silanol groups, i.e., single, (SiO)(3)Si-OH, hydrogen-bonded, (SiO)(3)Si-OH-OH-Si(SiO)(3), and geminal, (SiO)(2)Si(OH)(2), can be observed. The number of silanol groups/nm(2), alpha(OH), as determined by NMR, varies between 2.5 and 3.0 depending on the template-removal methods. All these silanol groups were found to be the active sites for adsorption of pyridine with desorption energies of 91.4 and 52.2 kJ mol(-1), respectively. However, only free silanol groups (involving single and geminal silanols) are highly accessible to the silylating agent, chlorotrimethylsilane. Silylation can modify both the physical and chemical properties of MCM-41.

Audit and comprehensive health assessment programme in the primary healthcare of adults with intellectual disability: a pilot study

International research has demonstrated significant shortcomings in the health of adults with intellectual disability (ID). Because general practitioners (GPs) are the main providers of primary healthcare for this population, strategies to improve general practice care are an important aspect of rectifying these shortcomings. The present pilot study aimed to determine the effect of various interventions on health maintenance activities and to assess their acceptability to GPs, with a view to informing larger scale studies. The GPs were recruited through an earlier questionnaire-based postal survey. The GPs identified all their adult patients with ID, then obtained consent for participation from three patients randomly selected by the investigators. The GPs completed two self-evaluation forms and case note audits 12 months apart, read a synopsis of the relevant literature provided by the researchers, and completed a comprehensive health assessment (CHA) of their three patients. Forty-five GPs agreed to participate in the CHA programme (CHAP), and 15 completed the project. Thirty-eight patients completed the project. The number of patient-GP dyads who completed the project was too small to demonstrate statistically significant changes in health issues over time. The GPs found that the synopsis of the literature was the best intervention for increasing knowledge and was also the most practical to use in general practice. The CHAP was the intervention that prompted the most action from the GP which would not have been undertaken otherwise. The CHAP appeared to provide a superior review process compared to the other interventions used in the present study. The numbers of health maintenance activities found to be overdue and the number of health issues detected as a result of the process were considerable. The CHAP served as a communication tool and an educative instrument, providing a basis for future studies and strategies to improve the general practice care of adults with ID.

A comprehensive insight into floc characteristics and their impact on compressibility and settleability of activated sludge

This paper presents a comprehensive study of sludge floc characteristics and their impact on compressibility and settleability of activated sludge in full scale wastewater treatment processes. The sludge flocs were characterised by morphological (floc size distribution, fractal dimension, filament index), physical (flocculating ability, viscosity, hydrophobicity and surface charge) and chemical (polymeric constituents and metal content) parameters. Compressibility and settleability were defined in terms of the sludge volume index (SVI) and zone settling velocity (ZSV). The floc morphological and physical properties had important influence on the sludge compressibility and settleability. Sludges containing large flocs and high quantities of filaments, corresponding to lower values of fractal dimension (D-f), demonstrated poor compressibility and settleability. Sludge flocs with high flocculating ability had lower SVI and higher ZSV, whereas high values of hydrophobicity, negative surface charge and viscosity of the sludge flocs correlated to high SVI and low ZSV. The quantity of the polymeric compounds protein. humic substances and carbohydrate in the sludge and the extracted extracellular polymeric substances (EPS) had significant positive correlations with SVI. The ZSV was quantitatively independent of the polymeric constituents. High concentrations of the extracted EPS were related to poor compressibility and settleability. The cationic ions Ca, Mg, Al and Fe in the sludge improved significantly the sludge compressibility and settleability. (C) 2003 Elsevier Science B.V. All rights reserved.