Molecular sieve silica membranes for H2/CO separation

Efficient separation of fuel gas (H2) from other gases in reformed gas mixtures is becoming increasingly important in the development of alternative energy systems. A highly efficient and new technology available for these separations is molecular sieve silica (MSS) membranes derived from tetraethyl-orthosilicate (TEOS). A permeation model is developed from an analogous electronic system and compared to transport theory to determine permeation, selectivity and apparent activation of energy based on experimental values. Experimental results for high quality membranes show single gas permselectivity peaking at 57 for H2/CO at 150°C with a H2 permeation of 5.14 x 10^-8 mol.m^-2.s^-1.Pa^-1. Higher permeance was also achieved, but at the expense of selectivity. This is the case for low quality membranes with peak H2 permeation at 1.78 x 10-7 mol.m-2.s-1.Pa-1 at 22°C and H2/CO permselectivity of 4.5. High quality membranes are characterised with positive apparent activation energy while the low quality membranes have negative values. The model had a good fit of r-squared of 0.99-1.00 using the experimental data.

Hydrostability and Scaling Up Molecular Sieve Silica (MSS) Membranes for H2/CO Separation in Fuel Cell Systems

MSS membranes are a good candidate for CO cleanup in fuel cell fuel processing systems due to their ability to selectively permeate H2 over CO via molecular sieving. Successfully scaled up tubular membranes were stable under dry conditions to 400°C with H2 permeance as high as 2 x 10-6 mol.m-2.s^-1.Pa^-1 at 200 degrees C and H2/CO selectivity up to 6.4, indicating molecular sieving was the dominant mechanism. A novel carbonised template molecular sieve silica (CTMSS) technology gave the scaled up membranes resilience in hydrothermal conditions up to 400 degrees C in 34% steam and synthetic reformate, which is required for use in fuel cell CO cleanup systems.

Street elevation, White Residence, Brisbane

South-west elevation, as seen from street.

Street elevation, Goetz Residence, Buderim, Sunshine Coast

North-West elevation, as seen from street.

View along gallery to West, Goetz Residence, Buderim, Sunshine Coast

As seen from dining room.

Casement windows to bedrooms, Goetz Residence, Buderim, Sunshine Coast

As seen from the North-East.

Dining room interior, Goetz Residence, Buderim, Sunshine Coast

Looking through to sitting room beyond.

Elevations, Goetz Residence II, Red Hill, Brisbane

Hand-drawn elevations of proposed residence.

Floor plan, Goetz Residence II, Red Hill, Brisbane

Hand-drawn plan of proposed residence.

Owner's residence and guest house, Judge House, Camp Island

View over owner's residence to holiday house pavilions and ocean beyond.

North-West elevation, Smeeton Residence, Buderim

Street (North-West) elevation.