Sustainable design practitioners: Why they must be at the centre of discussions on sustainable design education

Sustainable design education is vital for engineering students. This is to allow them to meet the challenges both engineering and the wider community will face in the future. This need has not only been mandated by Engineers Australia’s graduate attributes from an Australian perspective, but more widely the issue of sustainability is one of the greatest challenges humanity has ever faced. Engineers need to be at the forefront of this challenge, because we can not only do the greatest good, but have the potential to cause the greatest harm. The biggest question with respect to the education of engineers about sustainable design is what do engineers need to know, and how best to enable this learning. This paper argues that since the entire phenomenon of sustainable design is constantly growing and changing, it is only by looking at practitioners currently trying design sustainably, and their ways of experiencing sustainable design, can we hope to articulate what it is, and therefore what and how we need to teach engineering students. It also argues that to accommodate sustainable design within engineering, we need to go further and transform the engineering profession to enable it to meet the challenges that sustainability presents. © 2005, Australasian Association for Engineering Education

Scaling of decoherence effects in quantum computers

The scaling of decoherence rates with qubit number N is studied for a simple model of a quantum computer in the situation where N is large. The two state qubits are localized around well-separated positions via trapping potentials and vibrational centre of mass motion of the qubits occurs. Coherent one and two qubit gating processes are controlled by external classical fields and facilitated by a cavity mode ancilla. Decoherence due to qubit coupling to a bath of spontaneous modes, cavity decay modes and to the vibrational modes is treated. A non-Markovian treatment of the short time behaviour of the fidelity is presented, and expressions for the characteristic decoherence time scales obtained for the case where the qubit/cavity mode ancilla is in a pure state and the baths are in thermal states. Specific results are given for the case where the cavity mode is in the vacuum state and gating processes are absent and the qubits are in (a) the Hadamard state (b) the GHZ state.

Galaxy threshing and the origin of ultra-compact dwarf galaxies in the Fornax cluster

A recent all-object spectroscopic survey centred on the Fornax cluster of galaxies has discovered a population of subluminous and extremely compact members, called 'ultra-compact dwarf' (UCD) galaxies. In order to clarify the origin of these objects, we have used self-consistent numerical simulations to study the dynamical evolution a nucleated dwarf galaxy would undergo if orbiting the centre of the Fornax cluster and suffering from its strong tidal gravitational field. We find that the outer stellar components of a nucleated dwarf are removed by the strong tidal field of the cluster, whereas the nucleus manages to survive as a result of its initially compact nature. The developed naked nucleus is found to have physical properties (e. g. size and mass) similar to those observed for UCDs. We also find that although this formation process does not have a strong dependence on the initial total luminosity of the nucleated dwarf, it does depend on the radial density profile of the dark halo in the sense that UCDs are less likely to be formed from dwarfs embedded in dark matter haloes with central 'cuspy' density profiles. Our simulations also suggest that very massive and compact stellar systems can be rapidly and efficiently formed in the central regions of dwarfs through the merging of smaller star clusters. We provide some theoretical predictions on the total number and radial number density profile of UCDs in a cluster and their dependencies on cluster masses.

Highly organized structure in the non-coding region of the psbA minicircle from clade C Symbiodinium

The chloroplast genes of dinoflagellates are distributed among small, circular dsDNA molecules termed minicircles. In this paper, we describe the structure of the non-coding region of the psbA minicircle from Symbiodinium. DNA sequence was obtained from five Symbiodinium strains obtained from four different coral host species (Goniopora tenuidens, Heliofungia actiniformis, Leptastrea purpurea and Pocillopora damicornis), which had previously been determined to be closely related using LSU rDNA region D1/D2 sequence analysis. Eight distinct sequence blocks, consisting of four conserved cores interspersed with two metastable regions and flanked by two variable regions, occurred at similar positions in all strains. Inverted repeats (IRs) occurred in tandem or 'twin' formation within two of the four cores. The metastable regions also consisted of twin IRs and had modular behaviour, being either fully present or completely absent in the different strains. These twin IRs are similar in sequence to double-hairpin elements (DHEs) found in the mitochondrial genomes of some fungi, and may be mobile elements or may serve a functional role in recombination or replication. Within the central unit (consisting of the cores plus the metastable regions), all IRs contained perfect sequence inverses, implying they are highly evolved. IRs were also present outside the central unit but these were imperfect and possessed by individual strains only. A central adenine-rich sequence most closely resembled one in the centre of the non-coding part of Amphidinium operculatum minicircles, and is a potential origin of replication. Sequence polymorphism was extremely high in the variable regions, suggesting that these regions may be useful for distinguishing strains that cannot be differentiated using molecular markers currently available for Symbiodinium.

Microspectrophotometry of visual pigments and oil droplets in a marine bird, the wedge-tailed shearwater Puffinus pacificus: Topographic variations in photoreceptor spectral characteristics

Microspectrophotometric examination of the retina of a procellariiform marine bird, the wedge-tailed shearwater Puffinus pacificus, revealed the presence of five different types of vitamin A(1)-based visual pigment in seven different types of photoreceptor. A single class of rod contained a medium-wavelength sensitive visual pigment with a wavelength of maximum absorbance (lambda(max)) at 502 nm. Four different types of single cone contained visual pigments maximally sensitive in either the violet (VS, lambda(max) 406 nm), short (SWS, lambda(max) 450 nm), medium (MWS, lambda(max) 503 nm) or long (LWS, lambda(max) 566 nm) spectral ranges. In the peripheral retina, the SWS, MWS and LWS single cones contained pigmented oil droplets in their inner segments with cut-off wavelengths (lambda(cut)) at 445 (C-type), 506 (Y-type) and 562 nm (R-type), respectively. The VS visual pigment was paired with a transparent (T-type) oil droplet that displayed no significant absorption above at least 370 run. Both the principal and accessory members of the double cone pair contained the same 566 nm lambda(max) visual pigment as the LWS single cones but only the principal member contained an oil droplet, which had a lambda(cut) at 413 nm. The retina had a horizontal band or 'visual streak' of increased photoreceptor density running across the retina approximately 1.5 mm dorsal to the top of the pecten. Cones in the centre of the horizontal streak were smaller and had oil droplets that were either transparent/colourless or much less pigmented than at the periphery. It is proposed that the reduction in cone oil droplet pigmentation in retinal areas associated with high visual acuity is an adaptation to compensate for the reduced photon capture ability of the narrower photoreceptors found there. Measurements of the spectral transmittance of the ocular media reveal that wavelengths down to at least 300 nm would be transmitted to the retina.

Cytotoxicity of topical antimicrobial agents used in burn wounds in Australasia

Background: Burn sepsis is a leading cause of mortality and morbidity in patients with major burns. The use of topical antimicrobial agents has helped improve the survival of these patients. Silvazine (Sigma Pharmaceuticals, Melbourne, Australia) (1% silver sulphadiazine and 0.2% chlorhexidine digluconate) is used exclusively in Australasia, and there is no published study on its cytotoxicity. This study compared the relative cytotoxicity of Silvazine with 1% silver sulphadiazine (Flamazine (Smith & Nephew Healthcare. Hull. UK)) and a silver-based dressing (Acticoat (Smith & Nephew Healthcare, Hull, UK)). Methods: Dressings were applied to the centre of culture plates that were then seeded with keratinocytes at an estimated 25% confluence. The plates were incubated for 72 h and culture medium and dressings then removed. Toluidine blue was added to stain the remaining keratinocytes. Following removal of the dye, the plates were photographed under standard conditions and these digital images were analysed using image analysis software. Data was analysed using Student's t-test. Results: In the present study, Silvazine is the most cytotoxic agent. Seventy-two hour exposure to Silvazine in the present study results in almost no keratinocyte survival at all and a highly statistically significant reduction in cell survival relative to control, Acticoat and Flamazine (P

Effects of hatchery shading and nest depth on the development and quality of Chelonia mydas hatchlings: implications for hatchery management in Peninsular, Malaysia

One of the decisions made by hatchery managers around the world is what degree of shading and nest depth are required to maximise the production of high-quality hatchlings at optimal sex ratios. The primary objectives of this study were to determine the effects of (1) hatchery shading and nest depth on nest temperatures and emergence lag, and (2) nest temperatures and nest depth on hatchling sex ratio and quality. In 2001, 26 Chelonia mydas clutches from Ma'Daerah beach, Terengganu, Malaysia, were relocated alternatively at depths of 50 cm and 75 cm into a 70%-shaded and a 100%-shaded hatchery. Data loggers were placed into the centre of each relocated clutch to record the temperature every hour over the course of incubation. When the hatchlings emerged, a sample of the clutch was run, measured and weighed and a separate sample was examined histologically for sex characteristics. Nest temperatures ranged between 28 degrees C and 30 degrees C and generally showed increases over the second half of incubation due to metabolic heating of the clutch. There was no significant correlation found between nest temperature and any of the hatchling parameters measured. Hatchlings from 75-cm-deep nests had a longer emergence lag (46.4 (+/- 10.2) h) than hatchlings from 50-cm-deep nests. Hatch and emergence success were similar to those of natural populations and hatchling sex ratios were male dominant, with an average of 72% males. There was a poor correlation between mean middle-third incubation temperatures and sex ratio. Hatchlings from 75-cm-deep nests had similar running speeds but lower condition index than their conspecifics from 50-cm-deep nests.

The effects of energy sites on adsorption of Lennard–Jones fluids and phase transition in carbon slit pore of finite length a computer simulation study

A Monte Carlo simulation method is Used 10 study the effects of adsorption strength and topology of sites on adsorption of simple Lennard-Jones fluids in a carbon slit pore of finite length. Argon is used as a model adsorbate, while the adsorbent is modeled as a finite carbon slit pore whose two walls composed of three graphene layers with carbon atoms arranged in a hexagonal pattern. Impurities having well depth of interaction greater than that of carbon atom are assumed to be grafted onto the surface. Different topologies of the impurities; corner, centre, shelf and random topologies are studied. Adsorption isotherms of argon at 87.3 K are obtained for pore having widths of 1, 1.5 and 3 11111 using a Grand Canonical Monte Carlo simulation (GCMC). These results are compared with isotherms obtained for infinite pores. It is shown that the Surface heterogeneity affects significantly the overall adsorption isotherm, particularly the phase transition. Basically it shifts the onset of adsorption to lower pressure and the adsorption isotherms for these four impurity models are generally greater than that for finite pore. The positions of impurities on solid Surface also affect the shape of the adsorption isotherm and the phase transition. We have found that the impurities allocated at the centre of pore walls provide the greatest isotherm at low pressures. However when the pressure increases the impurities allocated along the edges of the graphene layers show the most significant effect on the adsorption isotherm. We have investigated the effect of surface heterogeneity on adsorption hysteresis loops of three models of impurity topology, it shows that the adsorption branches of these isotherms are different, while the desorption branches are quite close to each other. This suggests that the desorption branch is either the thermodynamic equilibrium branch or closer to it than the adsorption branch. (c) 2005 Elsevier Inc. All rights reserved.

A rheological assessment of the effect of trace level Ni additions on the solidification of Sn-0.7Cu

The influence of trace level Ni additions on the eutectic solidification mode of Sn-0.7Cu has been studied using continuous torque experiments during solidification. The solid fraction at which resistance to paddle rotation at the thermal centre of the sample occurs is related to the spatial distribution of solid during solidification. The results indicate that a transition in solidification mode occurs in the range 0-300 ppm Ni. Growth occurs antiparallel to heat flow from near the mould walls in the Ni-free alloy, while equiaxed growth from distributed centres dominates in alloys containing at least 300 ppm Ni. (c) 2006 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

AFLP analysis of genetic diversity within Saccharum officinarum and comparison with sugarcane cultivars

Molecular diversity among 421 clones of cultivated sugarcane and wild relatives was analysed using AFLP markers. Of these clones, 270 were Saccharum officinarum and 151 were either cultivars produced by the Australian breeding program or important parents used in the breeding program. The S. of. cinarum clones were obtained from a collection that contained clones from all the major regions where S. of. cinarum is grown. Five AFLP primer combinations generated 657 markers ofwhich 614 were polymorphic. All clones contained a large number of markers; a result of the polyploid nature and heterozygosity of the genome. S. of. cinarum clones from New Guinea displayed greater diversity than S. of. cinarum clones from other regions. This is in agreement with the hypothesis that New Guinea is the centre of origin of this species. The S. of. cinarum clones from Hawaii and Fiji formed a separate group and may correspond to clones that have been introgressed with other members of the ` Saccharum complex'. Greater diversity was found in the cultivars than in the S. of. cinarum clones due to the introgression of S. spontaneum chromatin. These cultivars clustered as expected based on pedigree. The major contribution of clones QN66- 2008 and Nco310 to Australian sugarcane cultivars divided the cultivars into 2 main groups. Although only a fewS. of. cinarum clones are known to have been used in the breeding of current cultivars, about 90% of markers present in the S. of. cinarum clone collection ( 2n= 80) were also present in the cultivar collection. This suggests that most of the observed genetic diversity in S. of. cinarum has been captured in Australian sugarcane germplasm.

Comparative gene expression in brain regions of human alcoholics

The mesocorticolimbic system is the reward centre of the brain and the major target for drugs of abuse including alcohol. Neuroadaptive changes in this region are thought to underlie the process of tolerance and dependence. Recently, several research groups have searched for alcohol-responsive genes using high-throughput microarrays and well-characterized human post-mortem material. Comparison of data from these studies of cortical regions highlights the differences in experimental approach and selection of cases. However, alcohol-responsive gene sets associated with transcription, oxidative stress and energy production were common to these studies. In marked contrast, alcohol-responsive genes in the nucleus accumbens and the ventral tegmental area are primarily associated with changes in neurotransmission and signal transduction. These data support the concept that, within cortical regions, changes in gene expression are associated with alcoholism-related pathology. In the dopaminergic tract of the mesocorticolimbic system, alcohol-responsive gene sets suggest long-term neuroplastic changes in synaptic transmission.