Layered silicate nanocomposites based on various high-functionality epoxy resins: The influence of an organoclay on resin cure

The influence of an organically modified clay on the curing behavior of three epoxy systems widely used in the aerospace industry and of different structures and functionalities, was studied. Diglycidyl ether of bisphenol A (DGEBA), triglycidyl p-amino phenol (TGAP) and tetraglycidyl diamino diphenylmethane (TGDDM) were mixed with an octadecyl ammonium ion modified organoclay and cured with diethyltoluene diamine (DETDA). The techniques of dynamic mechanical thermal analysis (DMTA), chemorheology and differential scanning calorimetry (DSC) were applied to investigate gelation and vitrification behavior, as well as catalytic effects of the clay on resin cure. While the formation of layered silicate nanocomposite based on the bifunctional DGEBA resin has been previously investigated to some extent, this paper represents the first detailed study of the cure behavior of different high performance, epoxy nanocomposite systems.

Identification of a major locus conferring resistance to powdery mildew (Erysiphe polygoni DC) in mungbean (Vigna radiata L. Wilczek) by QTL analysis

A major locus conferring resistance to the causal organism of powdery mildew, Erysiphe polygoni DC,, in mungbean (Vigna radiata L. Wilczek) was identified using QTL analysis with a population of 147 recombinant inbred individuals. The population was derived from a cross between 'Berken', a highly susceptible variety, and ATF 3640, a highly resistant line. To test for response to powdery mildew, F-7 and F-8 lines were inoculated by dispersing decaying mungbean leaves with residual conidia of E. polygoni amongst the young plants to create an artificial epidemic and assayed in a glasshouse facility. To generate a linkage map, 322 RFLP clones were tested against the two parents and 51 of these were selected to screen the mapping population. The 51 probes generated 52 mapped loci, which were used to construct a linkage map spanning 350 cM of the mungbean genome over 10 linkage groups. Using these markers, a single locus was identified that explained up to a maximum of 86% of the total variation in the resistance response to the pathogen.

Identification of the causal agent of pistachio dieback in Australia

Symptoms associated with pistachio dieback in Australia include decline (little or no current season growth), xylem staining in shoots two or more years old, trunk mu and limb lesions (often covered by black, superficial fungal growth), excessive exudation of resin, dieback and death of the tree. Bacteria belonging to the genus Xanthomonas have been suggested as the causal agent. To confirm the constant association between these bacteria and the disease syndrome, the absence of other pathogens and the identity of the pathogen, we performed a series of isolations and pathogenicity tests. The only microorganism consistently isolated from diseased tissue was a bacterium that produced yellow, mucoid colonies and displayed morphological and cultural characteristics typical of the genus Xanthomonas. Database comparisons of the fatty acid and whole-cell protein profiles of five representative pistachio isolates indicated that they all belonged to X. translucens, but it was not possible to allocate the isolates to pathovar. Pathogenicity tests on cereals and grasses supported this identification. However, Koch's postulates have been only partially fulfilled because not all symptoms associated with pistachio dieback were reproduced on inoculated two-year-old pistachio trees. While discolouration was observed, dieback, excessive resinous exudate and trunk and limb lesions were not produced; expression of these symptoms may be delayed, and long-term monitoring of a small number of inoculated trees is in progress.

Hydraulic properties of layered soils influence survival of Rhodes grass (Chloris gayana Kunth.) during water stress

Survival of vegetation on soil-capped mining wastes is often impaired during dry seasons due to the limited amount of water stored in the shallow soil capping. Growth and survival of Rhodes grass (Chloris gayana) during soil drying on various layered capping sequences constructed of combinations of topsoil, subsoil, seawater-neutralised residue sand and low grade bauxite was determined in a glasshouse. The aim was to describe the survival of Rhodes grass in terms of plant and soil water relationships. The soil water characteristic curve and soil texture analysis was a good predictor of plant survival. The combination of soil with a high water holding capacity and low soil water diffusivity (e.g. subsoil with high clay contents) with soil having a high water holding capacity and high diffusivity (e.g. residue sand) gave best survival during drying down (up to 88 days without water), whereas topsoil and low grade bauxite were unsuitable (plants died within 18-39 days). Clayey soil improved plant survival by triggering a water stress response during peak evaporative water demand once residue sand dried down and its diffusivity fell below a critical range. Thus, for revegetation in seasonally dry climates, soil capping should combine one soil with low diffusivity and one or more soils with high total water holding capacity and high diffusivity.

Thermal stability analysis of organo-silicates, using solid phase microextraction techniques

An analysis of thermal degradation products evolved during the melt processing of organo-layered silicates (OLS) was carried out via the use of a solid phase microextraction (SPME) technique. Two commerical OLSs and one produced in-house were prepared for comparision. The solid phase microextraction technique proved to be a very effective technique for investigating the degradation of the OLS at a specific processing temperature. The results showed that most available OLSs will degrade under typical conditions required for the melt processing of many polymers, including thermoplastic polyurethanes. It is suggested that these degradation products may lead to changes in the structure and properties of the final polymer, particularly in thermoplastic polyurethanes, which seem significantly succeptable to the presence of these products. It is also suggested that many commercially available OLSs are produced in such a way that results in an excess of unbound organic modifier, giving rise to a greater quantity of degradation products. All OLSs where compared and characterised by TGA and GC-MS. (c) 2004 Elsevier B.V. All rights reserved.

Symptom reporting and associations with compensation status, self-awareness, causal attributions, and emotional wellbeing following traumatic brain injury

Individuals seeking compensation following traumatic brain injury (TBI) are often found to report a disproportionately high level of symptoms relative to objective indicators of impairment. Previous studies highlight that level of symptom reporting is also related to self-awareness, causal attribution, and emotional wellbeing. Therefore, the reasons for high symptom reporting in the context of compensation are generally unclear. This study aimed to identify whether self-awareness, causal attribution, and emotional wellbeing are significantly associated with level of symptom reporting after controlling for compensation status. A sample of 54 participants with TBI comprised two groups, namely, claimants (n = 27) and non-claimants (n = 27), who were similar in terms of demographic and neuro-cognitive variables. Participants completed the Symptom Expectancy Checklist, Hospital Anxiety Depression Scale, Awareness Questionnaire and a causal attribution scale. A series of independent t tests and Pearson's correlations identified that a higher level of symptom reporting was associated with the following: seeking compensation, less severe TBI, increased age, greater self-awareness, increased post-injury changes reported by relatives, a higher level of mood symptoms, and a tendency to blame other people. Multivariate analysis identified that after controlling for demographic, injury, and compensation status variables, level of mood symptoms and self-awareness were significantly associated with level of symptom reporting. The findings suggest that mood symptoms and heightened self-awareness are significantly related to high symptom reporting independent of compensation status, thus supporting the need for clinicians to interpret symptom reporting within a biopsychosocial context.

Genetic uniformity of international isolates of Leifsonia xyli subsp xyli, causal agent of ratoon stunting disease of sugarcane

An international collection of the sugarcane ratoon stunting disease pathogen, Leifsonia xyli subsp. xyli, was analysed to assess genetic diversity. DNA fingerprinting using BOX primers was performed on 105 isolates, comprising 65 Australian isolates and an additional 40 isolates from Indonesia (n = 8), Japan (n = 1), USA (n = 3), Brazil (n = 2), Mali (n = 2), Zimbabwe (n = 13), South Africa (n = 9) and Reunion (n = 2). Sixty-two of these isolates were also screened using ERIC primers. No variation was found among any of the isolates. The intergenic spacer (IGS) region of the ribosomal RNA genes from 54 isolates was screened for sequence variation using single-stranded conformational polymorphism (SSCP), but none was observed. Direct sequencing of the IGS from a subset of nine isolates, representing all of the countries sampled in this study, confirmed the results of the SSCP analysis. Likewise, no sequence variation was found in the 16S ribosomal RNA genes of the same subset. Four Colombian isolates from sugarcane, morphologically similar to L. xyli subsp. xyli, were putatively shown to be an undescribed Agrococcus species of unknown pathogenicity. The lack of genetic variation among L. xyli subsp. xyli isolates, independent of time of sampling, cultivar of isolation, or country of origin, suggests the worldwide spread of a single pathogenic clone, and further suggests that sugarcane cultivars resistant to ratoon stunting disease in one area should retain this property in other regions.

Analysis of NDVI in the wet tropics to assess habitat stability

Proceedings of the 11th Australasian Remote Sensing and Photogrammetry Conference