Attachment insecurity, depression, and the transition to parenthood

In a longitudinal study of adult attachment and depression during the transition to parenthood, 76 couples completed questionnaires on three occasions: during the second trimester of pregnancy, and six weeks and six months postbirth. On the first and second occasions, the couples were also interviewed about their experiences of pregnancy and parenthood, respectively. Measures were also completed at similar time intervals by a comparison group of 74 childless couples. Attachment security was assessed in terms of the dimensions of discomfort with closeness and relationship anxiety. Relationship anxiety was less stable for transition wives than for other participants. Relationship anxiety also predicted increases in new mothers' depressive symptoms, after controlling for a broad range of other risk factors. However, the association between relationship anxiety and maternal depression was moderated by husbands' caregiving style. Maternal depression was linked to increases in husbands' and wives' attachment insecurity and marital dissatisfaction. Results are discussed in terms of the impact of depression and negative working models of attachment on couple interaction.

Morphological features of interfacial intermetallics and interfacial reaction rate in Al-11Si-2.5Cu-(0.15/0.60)Fe cast alloy/die steel couples

Soldering reactions are commonly observed during high pressure die casting of aluminium alloys, and involve the formation and growth of interfacial intermetallics between the die and the cast alloy. It is generally believed that close to 1% Fe is necessary in the aluminium alloy to reduce soldering. However, the role of iron in the interfacial reaction has not been studied in detail. In this investigation, reaction couples were formed between H13 tool steel substrates and an Al-11Si-2.5Cu melt containing either 0.15 or 0.60% Fe. Examination revealed distinctly different intermetallic layer morphology. The overall growth and chemistry of the reaction layer and the reaction rate measured by the consumption of the substrate were compared for the two alloy melts. It was demonstrated that a higher iron content reduces the rate of interfacial reaction, consistent with an observed thicker compact ( solid) intermetallic layer. Hence, the difference in reaction rate can be explained by a significant reduction in the diffusion flux due to a thicker compact layer. Finally, the mechanism of the growth of a thicker compact layer in the higher iron melt is proposed, based on the phase relations and diffusion both within and near the interfacial reaction zone. (C) 2004 Kluwer Academic Publishers.

Hurt feelings in couple relationships: Towards integrative models of the negative effects of hurtful events

Previous research suggests that hurt feelings can have powerful effects on individual and relational outcomes. This study examined a typology of hurtful events in couple relationships, together with integrative models predicting ongoing effects on victims and relationships. Participants were 224 students from introductory and third-year psychology classes, who completed open-ended and structured measures concerning an event in which a partner had hurt their feelings. By tailoring Leary et al.'s (1998) typology to the context of romantic relationships, five categories of hurtful events were proposed: active disassociation, passive disassociation, criticism, infidelity, and deception. Analyses assessing similarities and differences among the categories confirmed the utility of the typology. Structural equation modeling showed that longer-term effects on the victim were predicted by relationship anxiety and by the victim's immediate reactions to the event (negative emotions and self-perceptions; feelings of rejection and powerlessness). In contrast, ongoing effects on the relationship were predicted by avoidance, the victim's attributions and perceptions of offender remorse, and the victim's own behavior. The results highlight the utility of an integrated approach to hurt, incorporating emotional, cognitive, and behavioral responses, and dimensions of attachment security.

Iron catalysed assembly of an asymmetric mixed-ligand triple helicate

The 2-pyridinecarbaldehyde isonicotinoyl hydrazone (HPCIH) family of ligands are typically tridentate N,N,O chelators that exhibit very high in vitro activity in mobilizing intracellular Fe and are promising candidates for the treatment of Fe overload diseases. Complexation of ferrous perchlorate with HPCIH in MeCN solution gives the expected six-coordinate complex Fe-II(PCIH)(2). However, complexation of Fe-II with 2-pyridinecarbaldehyde picolinoyl hydrazone (HPCPH, an isomer of HPCIH) under the same conditions leads to spontaneous assembly of an unprecedented asymmetric, mixed-ligand dinuclear triple helical complex Fe-2(II)(PCPH)(2)(PPH), where PPH2- is the dianion of bis(picolinoyl) hydrazine. The X-ray crystal structure of this complex shows that each ligand binds simultaneously to both metal centres in a bidentate fashion. The dinuclear complex exhibits two well separated and totally reversible Fe-III/II redox couples as shown by cyclic voltammetry in MeCN solution.

To marry or not to marry: marital status and the household division of labour

Data from an Australian national survey (1996 to 1997) are used to examine domestic labor patterns among de facto and married men and women. The results show that women spend more time on housework and do a greater proportion of housework than men. However, the patterns are most traditional among married men and women. Women in de facto relationships spend less time doing housework and do a smaller proportion of indoor activities than married women. Men in de facto relationships do a larger proportion of indoor activities and a lower proportion of outdoor tasks than married men. The data also show that couples who have cohabited prior to marriage have more egalitarian divisions of labor than those who have not cohabited prior to marriage. This article concludes by arguing that the incompleteness of the de facto relationship provides a period of relative freedom in which to negotiate more equal roles.

Time-resolved spectroscopy of the metal-to-metal charge transfer excited state in dinuclear cyano-bridged mixed-valence complexes

Visible pump-probe spectroscopy has been used to identify and characterize short-lived metal-to-metal charge transfer (MMCT) excited states in a group of cyano-bridged mixed-valence complexes of the formula [(LCoNCMII)-N-III(CN)(5)](-), where L is a pentadentate macrocyclic pentaamine (L-14) or triamine-dithiaether (L-14S) and M is Fe or Ru. Nanosecond pump-probe spectroscopy on frozen solutions of [(LCoNCFeII)-Co-14-N-III(CN)(5)](-) and [(LCoNCFeII)-Co-14S-N-III(CN)(5)](-) at 11 K enabled the construction of difference transient absorption spectra that featured a rise in absorbance in the region of 350-400 nm consistent with the generation of the ferricyanide chromophore of the photoexcited complex. The MMCT excited state of the Ru analogue [(LCoNCRuII)-Co-14-N-III(CN)(5)](-) was too short-lived to allow its detection. Femtosecond pump-probe spectroscopy on aqueous solutions of [(LCoNCFeII)-Co-14-N-III(CN)(5)](-) and [(LCoNCFeII)-Co-14S-N-III(CN)(5)](-) at room temperature enabled the lifetimes of their Co-II-Fe-III MMCT excited states to be determined as 0.8 and 1.3 ps, respectively.

Direct electrochemistry of enzymes from the cytochrome P4502C family

The human cytochromes P450 are responsible for the clearance of similar to 90% of xenobiotics yet comparatively little is known about their electrochemistry. Here we report the first direct electrochemistry of P450s from the 2C subfamily; one of the major groups of enzymes from this family. Specifically, the proteins that we have examined are recombinant human P450s 2C9, 2C 18 and 2C 19 and reversible Fe-III/II couples are seen in the absence of dioxygen. Even in the presence of trace amounts of dioxygen, a pronounced cathodic response is seen which is assigned to catalytic reduction of the bound dioxygen ligand by the ferrous P450. (c) 2005 Elsevier B.V. All rights reserved.

Analysis of cardiac ventricular wall motion based on a three-dimensional electromechanical biventricular model

This paper describes a biventricular model, which couples the electrical and mechanical properties of the heart, and computer simulations of ventricular wall motion and deformation by means of a biventricular model. In the constructed electromechanical model, the mechanical analysis was based on composite material theory and the finite-element method; the propagation of electrical excitation was simulated using an electrical heart model, and the resulting active forces were used to calculate ventricular wall motion. Regional deformation and Lagrangian strain tensors were calculated during the systole phase. Displacements, minimum principal strains and torsion angle were used to describe the motion of the two ventricles. The simulations showed that during the period of systole, (1) the right ventricular free wall moves towards the septum, and at the same time, the base and middle of the free wall move towards the apex, which reduces the volume of the right ventricle; the minimum principle strain (E3) is largest at the apex, then at the middle of the free wall and its direction is in the approximate direction of the epicardial muscle fibres; (2) the base and middle of the left ventricular free wall move towards the apex and the apex remains almost static; the torsion angle is largest at the apex; the minimum principle strain E3 is largest at the apex and its direction on the surface of the middle wall of the left ventricle is roughly in the fibre orientation. These results are in good accordance with results obtained from MR tagging images reported in the literature. This study suggests that such an electromechanical biventricular model has the potential to be used to assess the mechanical function of the two ventricles, and also could improve the accuracy ECG simulation when it is used in heart torso model-based body surface potential simulation studies.

Attachment insecurity as a filter in the decoding and encoding of nonverbal behavior in close relationships

In this article, I have focused my comments on the possible associations between the cognitions related to different attachment styles, and the impact that those cognitions are likely to have on nonverbal encoding and decoding. I see attachment insecurity as acting as a filter, distorting both encoding and decoding processes. In terms of decoding, an insecure individual may appraise the situation as more threatening than it actually is, may see the attachment figure as more or less available than he or she actually is, and may make an inappropriate decision about the viability or desirability of seeking proximity to the attachment figure. Attachment insecurity is also likely to inhibit the distressed individual from expressing their distress in a way that is understood by the attachment figure and that increases the likelihood that the attachment figure will engage in supportive behavior.

A trace element study of siderite-jasper banded iron formation in the 3.45 Ga Warrawoona Group, Pilbara Craton - Formation from hydrothermal fluids and shallow seawater

Shale-normalised rare earth element and yttrium (REE + Y) patterns for siderite-jasper couples in a banded iron formation of the 3.45 Ga Panorama Formation, Warrawoona Group, eastern Pilbara Craton, display distinct positive Y and Eu anomalies and weak positive La and Gd anomalies, combined with depleted light REE relative to middle and heavy REE. Ambient seawater and hydrothermal fluids are identified as major sources of REE + Y for the BIF. In the case of siderites, strong correlations between incompatible trace elements and trace element ratios diagnostic of seawater indicate variable input from a terrigenous source (e.g. volcanic ash). We propose a volcanic caldera setting as a likely depositional environment where jasper and siderite precipitated as alternating bands in response to episodic changes in ambient water chemistry. The episodicity was either driven by fluctuations in the intensity of hydrothermal activity or changes in magma chamber activity, which in turn controlled relative sea level. In this context, precipitation of jasper probably reflects background conditions during which seawater was saturated in silica due to evaporative conditions, while siderites were deposited most likely during intermittent periods of enhanced volcanic activity when seawater was more acidic due to the release of exhalative phases (e.g. CO2). © 2005 Elsevier B.V. All rights reserved.

Influence of geometry on galvanic corrosion of AZ91D coupled to steel

The influence of geometric factors on the galvanic current density distribution for AZ91D coupled to steel was investigated using experimental measurements and a BEM model. The geometric factors were area ratio of anode/cathode, insulation distance between anode and cathode, depth of solution film covering the galvanic couple and the manner of interaction caused by two independent interacting galvanic couples. The galvanic current density distribution calculated from the BEM model was in good agreement with the experimental measurements. The galvanic current density distribution caused by the interaction of two independent galvanic couples can be reasonably predicted as the linear addition of the galvanic current density caused by each individual galvanic couple. (c) 2005 Elsevier Ltd. All rights reserved.