Dopant extraction from scanning capacitance microscopy measurements of p-n junctions using combined inverse modeling and forward simulation

This article proposes a more accurate approach to dopant extraction using combined inverse modeling and forward simulation of scanning capacitance microscopy (SCM) measurements on p-n junctions. The approach takes into account the essential physics of minority carrier response to the SCM probe tip in the presence of lateral electric fields due to a p-n junction. The effects of oxide fixed charge and interface state densities in the grown oxide layer on the p-n junction samples were considered in the proposed method. The extracted metallurgical and electrical junctions were compared to the apparent electrical junction obtained from SCM measurements. (C) 2002 American Institute of Physics.

Vibration instability in rolling mills: Modeling and experimental results

Models for the occurrence of the vibrational instability during rolling known as third octave chatter are presented and discussed. An analysis of rolling mill chatter was performed for the purpose of identifying characteristics of the vibrations and to determine any dependency on the rolling schedule. In particular, a stability criterion for the critical rolling speed is used to predict the maximum rolling speed without chatter instability on schedules from a 5 stand tandem mill rolling thin steel product. The results correlate well with measurements of critical speed occurring on the mill using a vibration monitor: This research provides significant insights into the chatter phenomena and has been used to investigate control methods for suppression of the instability.

Outcome of stroke patients admitted to intensive care: Experience from an Australian teaching hospital

The objective of this study was to determine the mortality rate and the functional outcomes of stroke patients admitted to the intensive care unit (ICU) and to identify predictors of poor outcome in this population. The records of all patients admitted to the ICU with the diagnosis of stroke between January 1994 and December 1999 were reviewed. Patients with subarachnoid haemorrhage were excluded. Data were collected on clinical and biological variables, risk factors for stroke and the presence of comorbidities. Mortality (ICU, in-hospital and three-month) and functional outcome were used as end-points. In the six-year-period, 61 patients were admitted to the ICU with either haemorrhagic or ischaemic stroke. Medical records were available for only 58 patients. There were 23 ischaemic and 35 haemorrhagic strokes. The ICU, in-hospital and three-month mortality rates were 36%, 47% and 52% respectively. There were no significant differences in the prevalence of premorbid risk factors between survivors and non-survivors. The mean Barthel score was significantly different between the independent and dependent survivors (94 +/- 6 vs 45 +/- 26, P < 0.001). A substantial number of patients with good functional outcomes had lower Rankin scores (92% vs 11%, P < 0.001). Only 46% of those who were alive at three months were functionally independent. Intensive care admission was associated with a high mortality rate and a high likelihood of dependent lifestyle after hospital discharge. Haemorrhagic stroke, fixed dilated pupil(s) and GCS < 10 during assessment were associated with increased mortality and poor functional outcome.

Adoption and maintenance of contour bunds and hedgerows in a dynamic environment - Experience in the Philippine uplands

The widespread adoption of soil conservation technologies by farmers (notably contour hedgerows) observed in Guba, Cebu City, Philippines, is not often observed elsewhere In the country. Adoption of these technologies was because of the interaction of such phenomena as site-specific factors, appropriate extension systems, and technologies. However, lack of hedgerow maintenance, decreasing hedgerow quality, and disappearance of hedgerows raised concerns about sustainability. The dynamic nature of upland farming systems suggests the need for a location-specific farming system development framework, which provides farmers with ongoing extension for continual promotion of appropriate conservation practices.

Finite difference time domain (FDTD) method for modeling the effect of switched gradients on the human body in MRI

Numerical modeling of the eddy currents induced in the human body by the pulsed field gradients in MRI presents a difficult computational problem. It requires an efficient and accurate computational method for high spatial resolution analyses with a relatively low input frequency. In this article, a new technique is described which allows the finite difference time domain (FDTD) method to be efficiently applied over a very large frequency range, including low frequencies. This is not the case in conventional FDTD-based methods. A method of implementing streamline gradients in FDTD is presented, as well as comparative analyses which show that the correct source injection in the FDTD simulation plays a crucial rule in obtaining accurate solutions. In particular, making use of the derivative of the input source waveform is shown to provide distinct benefits in accuracy over direct source injection. In the method, no alterations to the properties of either the source or the transmission media are required. The method is essentially frequency independent and the source injection method has been verified against examples with analytical solutions. Results are presented showing the spatial distribution of gradient-induced electric fields and eddy currents in a complete body model.

Modeling of phase equilibrium and vapor adsorption on carbon black based on a combination of a lattice theory and equation of state

A thermodynamic approach is developed in this paper to describe the behavior of a subcritical fluid in the neighborhood of vapor-liquid interface and close to a graphite surface. The fluid is modeled as a system of parallel molecular layers. The Helmholtz free energy of the fluid is expressed as the sum of the intrinsic Helmholtz free energies of separate layers and the potential energy of their mutual interactions calculated by the 10-4 potential. This Helmholtz free energy is described by an equation of state (such as the Bender or Peng-Robinson equation), which allows us a convenient means to obtain the intrinsic Helmholtz free energy of each molecular layer as a function of its two-dimensional density. All molecular layers of the bulk fluid are in mechanical equilibrium corresponding to the minimum of the total potential energy. In the case of adsorption the external potential exerted by the graphite layers is added to the free energy. The state of the interface zone between the liquid and the vapor phases or the state of the adsorbed phase is determined by the minimum of the grand potential. In the case of phase equilibrium the approach leads to the distribution of density and pressure over the transition zone. The interrelation between the collision diameter and the potential well depth was determined by the surface tension. It was shown that the distance between neighboring molecular layers substantially changes in the vapor-liquid transition zone and in the adsorbed phase with loading. The approach is considered in this paper for the case of adsorption of argon and nitrogen on carbon black. In both cases an excellent agreement with the experimental data was achieved without additional assumptions and fitting parameters, except for the fluid-solid potential well depth. The approach has far-reaching consequences and can be readily extended to the model of adsorption in slit pores of carbonaceous materials and to the analysis of multicomponent adsorption systems. (C) 2002 Elsevier Science (USA).

Modeling of gas adsorption equilibrium over a wide range of pressure: A thermodynamic approach based on equation of state

A thermodynamic approach based on the Bender equation of state is suggested for the analysis of supercritical gas adsorption on activated carbons at high pressure. The approach accounts for the equality of the chemical potential in the adsorbed phase and that in the corresponding bulk phase and the distribution of elements of the adsorption volume (EAV) over the potential energy for gas-solid interaction. This scheme is extended to subcritical fluid adsorption and takes into account the phase transition in EAV The method is adapted to gravimetric measurements of mass excess adsorption and has been applied to the adsorption of argon, nitrogen, methane, ethane, carbon dioxide, and helium on activated carbon Norit R I in the temperature range from 25 to 70 C. The distribution function of adsorption volume elements over potentials exhibits overlapping peaks and is consistently reproduced for different gases. It was found that the distribution function changes weakly with temperature, which was confirmed by its comparison with the distribution function obtained by the same method using nitrogen adsorption isotherm at 77 K. It was shown that parameters such as pore volume and skeleton density can be determined directly from adsorption measurements, while the conventional approach of helium expansion at room temperature can lead to erroneous results due to the adsorption of helium in small pores of activated carbon. The approach is a convenient tool for analysis and correlation of excess adsorption isotherms over a wide range of pressure and temperature. This approach can be readily extended to the analysis of multicomponent adsorption systems. (C) 2002 Elsevier Science (USA).

Teacher Use of Learners' Native Language in the Foreign Language Classroom

This article reports on an exploratory study into the use of students' native language (NL) by teachers in the foreign language (FL) classroom. The project was undertaken by four teachers of beginner French at the University of Queensland. The teachers' aim was to investigate the use of NL in a context which actively promotes an immersion approach to FL teaching. The audio recordings of the teachers' speech were transcribed to provide data for estimating the amount of NL, and for analyzing the various instances of NL use. The study indicates that the activity type is a significant variable affecting NL amount. It also isolates two strategic uses of NL, translating FL words into NL, and contrasting NL and FL forms, both of which involve intrasentential code switching with NL words embedded in an FL sentence. The study suggests that these strategies may facilitate acquisition during immersion in FL, but experimental research is needed to test the hypothesis that translation and contrast facilitate learning of FL vocabulary and grammar.

Board composition and corporate performance: How the Australian experience informs contrasting theories of corporate governance

In many respects, Australian boards more closely approach normative best practice guidelines for corporate governance than boards in other Western countries. Do Australian firms then demonstrate a board demographic-organisational performance link that has not been found in other economies? We examine the relationships between board demographics and corporate performance in 348 of Australia's largest publicly listed companies and describe the attributes of these firms and their boards. We find that, after controlling for firm size, board size is positively correlated with firm value. We also find a positive relationship between the proportion of inside directors and the market-based measure of firm performance. We discuss the implications of these findings and compare our findings to prevailing research in the US and the UK.

The modeling of turbulent reactive flows based on multiple mapping conditioning

A new modeling approach-multiple mapping conditioning (MMC)-is introduced to treat mixing and reaction in turbulent flows. The model combines the advantages of the probability density function and the conditional moment closure methods and is based on a certain generalization of the mapping closure concept. An equivalent stochastic formulation of the MMC model is given. The validity of the closuring hypothesis of the model is demonstrated by a comparison with direct numerical simulation results for the three-stream mixing problem. (C) 2003 American Institute of Physics.

An electromagnetic-field method modeling of a radial line planar antenna with coupling probes

This communications describes an electromagnetic model of a radial line planar antenna consisting of a radial guide with one central probe and many peripheral probes arranged in concentric circles feeding an array of antenna elements such as patches or wire curls. The model takes into account interactions between the coupling probes while assuming isolation of radiating elements. Based on this model, computer programs are developed to determine equivalent circuit parameters of the feed network and the radiation pattern of the radial line planar antenna. Comparisons are made between the present model and the two-probe model developed earlier by other researchers.