Novel omega-conotoxins from Conus catus discriminate among neuronal calcium channel subtypes

omega -Conotoxins selective for N-type calcium channels are useful in the management of severe pain. In an attempt to expand the therapeutic potential of this class, four new omega -conotoxins (CVIA-D) have been discovered in the venom of the piscivorous cone snail, Conus catus, using assay-guided fractionation and gene cloning. Compared with other omega -conotoxins, CVID has a novel loop 4 sequence and the highest selectivity for N-type over P/Q-type calcium channels in radioligand binding assays. CVIA-D also inhibited contractions of electrically stimulated rat vas deferens. In electrophysiological studies, omega -conotoxins CVID and MVIIA had similar potencies to inhibit current through central (alpha (1B-d)) and peripheral (alpha (1B-b)) splice variants of the rat N-type calcium channels when coexpressed with rat beta (3) in Xenopus oocytes, However, the potency of CVID and MVIIA increased when alpha (1B-d) and alpha (1B-b) were expressed in the absence of rat beta (3), an effect most pronounced for CVID at alpha (1B-d) (up to 540-fold) and least pronounced for MVIIA at alpha (1B-d) (3-fold). The novel selectivity of CVID may have therapeutic implications. H-1 NMR studies reveal that CMD possesses a combination of unique structural features, including two hydrogen bonds that stabilize loop 2 and place loop 2 proximal to loop 4, creating a globular surface that is rigid and well defined.

Commentary: Using the convection-dispersion model and transit time density functions in the analysis of organ distribution kinetics

The convection-dispersion model and its extended form have been used to describe solute disposition in organs and to predict hepatic availabilities. A range of empirical transit-time density functions has also been used for a similar purpose. The use of the dispersion model with mixed boundary conditions and transit-time density functions has been queried recently by Hisaka and Sugiyanaa in this journal. We suggest that, consistent with soil science and chemical engineering literature, the mixed boundary conditions are appropriate providing concentrations are defined in terms of flux to ensure continuity at the boundaries and mass balance. It is suggested that the use of the inverse Gaussian or other functions as empirical transit-time densities is independent of any boundary condition consideration. The mixed boundary condition solutions of the convection-dispersion model are the easiest to use when linear kinetics applies. In contrast, the closed conditions are easier to apply in a numerical analysis of nonlinear disposition of solutes in organs. We therefore argue that the use of hepatic elimination models should be based on pragmatic considerations, giving emphasis to using the simplest or easiest solution that will give a sufficiently accurate prediction of hepatic pharmacokinetics for a particular application. (C) 2000 Wiley-Liss Inc. and the American Pharmaceutical Association J Pharm Sci 89:1579-1586, 2000.

Redating the onset of burning at Lynch's Crater (North Queensland): implications for human settlement in Australia

Lynch's Crater preserves a continuous, high-resolution record of environmental changes in north Queensland. This record suggests a marked increase in burning that appears to be independent of any known major climatic boundaries. This increase is accompanied, or closely followed, by the virtually complete replacement of rainforest by sclerophyll vegetation. The absence of any major climatic shift associated with this increase in fire frequency therefore has been interpreted as a result of early human impact in the area. The age for this increase in burning, on the basis of conventional radiocarbon dating, was previously thought to be approximately 38000 C-14 yr BP, supporting the traditional model for human arrival in Australia at 40 000 C-14 yr BP Here we have applied a more rigorous pre-treatment and graphitisation procedure for radiocarbon dating samples from the Lynch's Crater sequence. These new dates suggest that the increase in fire frequency occurred at 45 000 C-14 yr BP, supporting the alternative view that human occupation of Australia occurred by at least 45 000-55 000 cal. yr BP. Copyright (C) 2001 John Wiley & Sons, Ltd.

Semiochemicals and social signaling in the wild European rabbit in Australia: I. Scent profiles of chin gland secretion from the field

The European rabbit (Oryctolagus cuniculus) uses the secretion of the chin gland in the maintenance of social status. Previous work has concentrated on secretion collected directly from the animal. In this study, the analysis was conducted by collecting scent marks made by free-ranging animals. Scent marks were found to be concentrated at the center of the area controlled by a social group, and at the boundaries between two adjacent social groups. Only the mark from dominant animals could be identified. Marks were also collected from the skin of rabbits, where they had been placed by the dominant individual. The mark found on the head of a subordinate animal may, in the future, be used to identify the dominant animal of the social group, who placed the mark.

Thermal stability of mixed-cation alpha-sialon ceramics

A series of alpha-sialon (alpha') compositions containing mixed stabilising cations were prepared, by introducing additional CaO to a basic Sm alpha-sialon compositions. The thermal stability of these Sm-Ca-containing alpha-sialon phases was investigated using XRD, SEM and EDXS techniques. It was found that the addition of calcium into the Sm alpha-sialon systems greatly improved the stability of the alpha-sialon phases. Calcium was found to be incorporated into the alpha-sialon structure, coexistent with the samarium, and partitioning of the calcium and samarium was observed between the alpha' phase and grain boundary phases. This indicates a technique which may be used to improve the thermal stability of the alpha' phase while maintaining good refractory phases at the gialon grain boundaries. (C) 2003 Elsevier Science B.V. All rights reserved.

Outcome research in psychodynamic psychotherapy: Psychological, social and neuropsychological factors

While many studies have demonstrated positive outcomes from psychotherapy when it is practiced in a controlled research environment with carefully selected (or excluded) patient groups and rigid manualised therapy sessions there is a paucity of research regarding effective outcomes from psychotherapy as it is practiced in actual clinical conditions. The aim of this series of studies was to investigate outcomes, using an effectiveness approach, from psychodynamic psychotherapy as it is practiced by private psychiatrists. Three studies were planned. The aim of Study 1 was to provide standardized baseline measures on the following dimensions • Personal Demographic Information (PDI), • Target Symptoms and Disorders (TSD) including a neuropsychological profile • Inter and Intra Personal (IIP) factors, and, • General Functioning and Quality of Life (GFQoL) factors. Study 2 aimed to examine changes in patient characteristics during the course of treatment. Thus, baseline assessments were repeated at sixmonthly intervals to determine if therapy had been effective for individual patients. A third study was planned to assess the extent to which the results of significant outcome predictors could be replicated in different patient samples. Twenty-nine psychiatrists consented to refer patients with 20 patients having completed pre therapy assessments and six and 18-month follow-up questionnaires. The presentation of this research will focus on the interesting research methodology utilized, patient demographic characteristics and on the patient changes occurring over time on the dimensions of Defence Style (DSQ), Quality of Life (WHOQOL- Bref) and the severity of depression (BDI). The patient sample included 10 male and 10 female patients, whose ages ranged from 19 years to 66 years (mean = 43 years). While seven of the patients did not meet SCID-IV criteria for a current DSM-IV Axis 1 disorder, six patients met criteria for a current mood disorder, three for panic disorder, one patient each for PTSD, alcohol abuse and dependence, and 2 patients met current criteria for multiple Axis 1 disorders. The research is ongoing.

Falls prevention in rural general practice: what stands the test of time and where to from here?

Objective: General practitioner recall of the 1992-96 'Stay on Your Feet'(SOYF) program and its influence on practice were surveyed five years post-intervention to gauge sustainability of the SOYF General Practice (GP) component. Methods: A survey assessed which SOYF components were still in existence, current practice related to falls prevention, and interest in professional development. All general practitioners (GPs) situated within the boundaries of a rural Area Health Service were mailed a survey in late 2001. Results: Response rate was 66.5% (139/ 209). Of 117 GPs in practice at the time of SOYF, 80.2% reported having heard of SOYF and 74.4% of those felt it had influenced practice. Half (50.9%) still had a copy of the SOYF GP resource and of those, 58.6% used it at least 'occasionally'. Three-quarters of GPs surveyed (75.2%) checked medications 'most/almost all' of the time with patients over 60 years; 46.7% assessed falls risk factors; 41.3% gave advice; and 22.6% referred to allied health practitioners. GPs indicated a strong interest in falls prevention- related professional development. There was no significant association between use of the SOYF resource package and any of the current falls prevention practices (all chi(2)>0.05). Conclusions and implications: There was high recall of SOYF and a general belief that it influenced practice. There was little indication that use of the resource had any lasting influence on GPs' practices. In future, careful thought needs to go into designing a program that has potential to affect long-term change in GPs' falls prevention practice.

Observations of anti-winds in a deep alpine valley, Lake Tekapo, New Zealand

This paper presents observations of summertime anti-winds monitored under ideal conditions in the Lake Tekapo hydro-catchment situated in the central Southern Alps, New Zealand. Onset and cessation of anti-winds was observed to coincide with the change in phase of the surface limbs of thermally generated valley and mountain winds under settled anti-cyclonic conditions. Anti-winds were best developed in the early morning before surface heating and associated convective mixing of the valley atmosphere began to mask the boundaries between the surface based limb of the mountain-valley wind and the corresponding anti-wind. By mid-day, the anti-valley wind exceeded the height of the surrounding ridgeline and became embedded in the topographically channeled gradient wind. Observations presented here have both theoretical and applied implications with regard to the development of thermally generated wind systems in deep alpine valleys, and their role in the dispersion of air pollution.

Studies on the gelation of photocatalysed dicyanate ester resins

The gel point of a dicyanate ester resin (Arocy B-10 (4-4'-dicyanato-2,2'-diphenylpropane)) heated following irradiation in the presence of the catalyst tricarbonyl cyclopentadienyl manganese (CpMn(CO)(3)) was studied using differential scanning calorimetry (d.s.c.) and dynamic rheological techniques over the temperature range 110-140 degrees C. The gel times of another commercial cyanate ester (RTX366) were also studied using independent rheological techniques, and the results agreed within experimental error. Gel times decreased linearly with increasing catalyst level and with increasing temperature according to an Arrhenius relation with activation energy of 68 +/- 6 kJmol(-1). The gel conversion was calculated by correlation of the rheological gel data to d.s.c. data to be 0.57 +/- 0.02, and differences between techniques, and between theoretical predictions, are discussed. Evidence is produced that the photocatalysed polymerization results in a greater rate of cyclotrimerization, less intramolecular cyclization and a more rigid network than the uncatalysed or metal salt-catalysed high-temperature polymerization. (C) 1997 Elsevier Science Ltd.

Finite element analysis of mechanical properties in discontinuously reinforced metal matrix composites with ultrafine microstructure

This investigation focused on the finite element analyses of elastic and plastic properties of aluminium/alumina composite materials with ultrafine microstructure. The commonly used unit cell model was used to predict the elastic properties. By combining the unit cell model with an indentation model, coupled with experimental indentation measurements, the plastic properties of the composites and the associated strengthening mechanism within the metal matrix material were investigated. The grain size of the matrix material was found to be an important factor influencing the mechanical properties of the composites studied. (C) 1997 Elsevier Science S.A.

Crystal structure at 1.1 angstrom resolution of alpha-conotoxin PnIB: Comparison with alpha-conotoxins PnIA and GI

Conotoxins are small, cysteine-rich peptides isolated from the venom of Conus spp. of predatory marine snails, which selectively target specific receptors and ion channels critical to the functioning of the neuromuscular system. alpha-Conotoxins PnIA and PnIB are both 16-residue peptides (differing in sequence at only two positions) isolated from the molluscivorous snail Conus pennaceus. In contrast to the muscle-selective alpha-conotoxin GI from Conus geographus, PnIA and PnIB block the neuronal nicotinic acetylcholine receptor (nAChR). Here, we describe the crystal structure of PnIB, solved at a resolution of 1.1 Angstrom and phased using the Shake-and-Bake direct methods program. PnIB crystals are orthorhombic and belong to the space group P2(1)2(1)2(1) with the following unit cell dimensions: a = 14.6 Angstrom, b = 26.1 Angstrom, and c = 29.2 Angstrom. The final refined structure of alpha-conotoxin PnIB includes all 16 residues plus 23 solvent molecules and has an overall R-factor of 14.7% (R-free of 15.9%). The crystal structures of the alpha-conotoxins PnIB and PnIA are solved from different crystal forms, with different solvent contents. Comparison of the structures reveals them to be very similar, showing that the unique backbone and disulfide architecture is not strongly influenced by crystal lattice constraints or solvent interactions. This finding supports the notion that this structural scaffold is a rigid support for the presentation of important functional groups. The structures of PnIB and PnIA differ in their shape and surface charge distribution from that of GI.

Student characteristics and academic success: An econometric study of the performance of "equity groups"

Like previous volumes in the Educational Innovation in Economics and Business Series, this book is genuinely international in terms of its coverage. With contributions from nine different countries and three continents, it reflects a global interest in, and commitment to, innovation in business education, with a view to enhancing the learning experience of both undergraduates and postgraduates. It should prove of value to anyone engaged directly in business education, defined broadly to embrace management, finance, marketing, economics, informational studies, and ethics, or who has responsibility for fostering the professional development of business educators. The contributions have been selected with the objective of encouraging and inspiring others as well as illustrating developments in the sphere of business education. This volume brings together a collection of articles describing different aspects of the developments taking place in today’s workplace and how they affect business education. It describes strategies for breaking boundaries for global learning. These target specific techniques regarding teams and collaborative learning, transitions from academic settings to the workplace, the role of IT in the learning process, and program-level innovation strategies. This volume addresses issues faced by professionals in higher and further education and also those involved in corporate training centers and industry.

The new craft skills of engineering: The impact of innovation technology on engineering practices

This chapter explores the impact of innovation technologies such as simulation, modelling, and rapid prototyping on engineering practice. Innovation technologies help redefine the role of engineers in the innovation process, creating a new division of innovative labour both with and across organizations. This chapter also explores the boundaries of experimentation and inertia within particular domains of problem-solving to create new opportunities and value.

A nanometre-scale non-periodic structural variation in high temperature superconducting ceramics and the implications for properties

Non-periodic structural variation has been found in the high T-c cuprates, YBa2Cu3O7-x and Hg0.67Pb0.33Ba2Ca2Cu3O8+delta, by image analysis of high resolution transmission electron microscope (HRTEM) images. We use two methods for analysis of the HRTEM images. The first method is a means for measuring the bending of lattice fringes at twin planes. The second method is a low-pass filter technique which enhances information contained by diffuse-scattered electrons and reveals what appears to be an interference effect between domains of differing lattice parameter in the top and bottom of the thin foil. We believe that these methods of image analysis could be usefully applied to the many thousands of HRTEM images that have been collected by other workers in the high temperature superconductor field. This work provides direct structural evidence for phase separation in high T-c cuprates, and gives support to recent stripes models that have been proposed to explain various angle resolved photoelectron spectroscopy and nuclear magnetic resonance data. We believe that the structural variation is a response to an opening of an electronic solubility gap where holes are not uniformly distributed in the material but are confined to metallic stripes. Optimum doping may occur as a consequence of the diffuse boundaries between stripes which arise from spinodal decomposition. Theoretical ideas about the high T-c cuprates which treat the cuprates as homogeneous may need to be modified in order to take account of this type of structural variation.

Analytical solution and numerical model for the interface in a stratified long wave system

For a two layered long wave propagation, linearized governing equations, which were derived earlier from the Euler equations of mass and momentum assuming negligible friction and interfacial mixing are solved analytically using Fourier transform. For the solution, variations of upper layer water level is assumed to be sinosoidal having known amplitude and variations of interface level is solved. As the governing equations are too complex to solve it analytically, density of upper layer fluid is assumed as very close to the density of lower layer fluid to simplify the lower layer equation. A numerical model is developed using the staggered leap-forg scheme for computation of water level and discharge in one dimensional propagation having known amplitude for the variations of upper layer water level and interface level to be solved. For the numerical model, water levels (upper layer and interface) at both the boundaries are assumed to be known from analytical solution. Results of numerical model are verified by comparing with the analytical solutions for different time period. Good agreements between analytical solution and numerical model are found for the stated boundary condition. The reliability of the developed numerical model is discussed, using it for different a (ratio of density of fluid in the upper layer to that in the lower layer) and p (ratio of water depth in the lower layer to that in the upper layer) values. It is found that as ‘CX’ increases amplification of interface also increases for same upper layer amplitude. Again for a constant lower layer depth, as ‘p’ increases amplification of interface. also increases for same upper layer amplitude.