Cost-effectiveness of cognitive behavioural therapy and selective serotonin reuptake inhibitors for major depression in children and adolescents

Objective: To assess from a health sector perspective the incremental cost-effectiveness of cognitive behavioural therapy (CBT) and selective serotonin reuptake inhibitors (SSRIs) for the treatment of major depressive disorder (MDD) in children and adolescents, compared to 'current practice'. Method: The health benefit is measured as a reduction in disability-adjusted life years (DALYs), based on effect size calculations from meta-analysis of randomised controlled trials. An assessment on second stage filter criteria ('equity'; 'strength of evidence', 'feasibility' and 'acceptability to stakeholders') is also undertaken to incorporate additional factors that impact on resource allocation decisions. Costs and benefits are tracked for the duration of a new episode of MDD arising in eligible children (age 6-17 years) in the Australian population in the year 2000. Simulation-modelling techniques are used to present a 95% uncertainty interval (UI) around the cost-effectiveness ratios. Results: Compared to current practice, CBT by public psychologists is the most cost-effective intervention for MDD in children and adolescents at A$9000 per DALY saved (95% UI A$3900 to A$24 000). SSRIs and CBT by other providers are less cost-effective but likely to be less than A$50 000 per DALY saved (> 80% chance). CBT is more effective than SSRIs in children and adolescents, resulting in a greater total health benefit (DALYs saved) than could be achieved with SSRIs. Issues that require attention for the CBT intervention include equity concerns, ensuring an adequate workforce, funding arrangements and acceptability to various stakeholders. Conclusions: Cognitive behavioural therapy provided by a public psychologist is the most effective and cost-effective option for the first-line treatment of MDD in children and adolescents. However, this option is not currently accessible by all patients and will require change in policy to allow more widespread uptake. It will also require 'start-up' costs and attention to ensuring an adequate workforce.

Cost-effectiveness of psychological and pharmacological interventions for generalized anxiety disorder and panic disorder

Objective: To assess from a health sector perspective the incremental cost-effectiveness of interventions for generalized anxiety disorder (cognitive behavioural therapy [CBT] and serotonin and noradrenaline reuptake inhibitors [SNRIs]) and panic disorder (CBT, selective serotonin reuptake inhibitors [SSRIs] and tricyclic antidepressants [TCAs]). Method: The health benefit is measured as a reduction in disability-adjusted life years (DALYs), based on effect size calculations from meta-analyses of randomised controlled trials. An assessment on second stage filters ('equity', 'strength of evidence', 'feasibility' and 'acceptability to stakeholders') is also undertaken to incorporate additional factors that impact on resource allocation decisions. Costs and benefits are calculated for a period of one year for the eligible population (prevalent cases of generalized anxiety disorder/panic disorder identified in the National Survey of Mental Health and Wellbeing, extrapolated to the Australian population in the year 2000 for those aged 18 years and older). Simulation modelling techniques are used to present 95% uncertainty intervals (UI) around the incremental cost-effectiveness ratios (ICERs). Results: Compared to current practice, CBT by a psychologist on a public salary is the most cost-effective intervention for both generalized anxiety disorder (A$6900/DALY saved; 95% UI A$4000 to A$12 000) and panic disorder (A$6800/DALY saved; 95% UI A$2900 to A$15 000). Cognitive behavioural therapy results in a greater total health benefit than the drug interventions for both anxiety disorders, although equity and feasibility concerns for CBT interventions are also greater. Conclusions: Cognitive behavioural therapy is the most effective and cost-effective intervention for generalized anxiety disorder and panic disorder. However, its implementation would require policy change to enable more widespread access to a sufficient number of trained therapists for the treatment of anxiety disorders.

Does health service utilisation vary by remoteness? South Australian population data and the Accessibility and Remoteness Index of Australia

Objective: To compare rates of self-reported use of health services between rural, remote and urban South Australians. Methods: Secondary data analysis from a population-based survey to assess health and well-being, conducted in South Australia in 2000. In all, 2,454 adults were randomly selected and interviewed using the computer-assisted telephone interview (CATI) system. We analysed health service use by Accessibility and Remoteness Index of Australia (ARIA) category. Results: There was no statistically significant difference in the median number of uses of the four types of health services studied across ARIA categories. Significantly fewer residents of highly accessible areas reported never using primary care services (14.4% vs. 22.2% in very remote areas), and significantly more reported high use ( greater than or equal to6 visits, 29.3% vs. 21.5%). Fewer residents of remote areas reported never attending hospital (65.6% vs. 73.8% in highly accessible areas). Frequency of use of mental health services was not statistically significantly different across ARIA categories. Very remote residents were more likely to spend at least one night in a public hospital (15.8%) than were residents of other areas (e.g. 5.9% for highly accessible areas). Conclusion: The self-reported frequency of use of a range of health services in South Australia was broadly similar across ARIA categories. However, use of primary care services was higher among residents of highly accessible areas and public hospital use increased with increasing remoteness. There is no evidence for systematic rural disadvantage in terms of self-reported health service utilisation in this State.

Overweight and obesity increase the risk of coronary heart disease: A pooled analysis of 30 prospective studies

The importance of overweight as a risk factor for coronary heart disease (CHD) remains unsettled. We estimated the relative risk (RR) for CHD associated with underweight (body mass index, BMI < 20 kg/m2), overweight (25 – 30 kg/m2) and obesity (= 30 kg/m2), compared with normal weight (20 – 25 kg/m2) in a random effects meta-analysis of 30 prospective studies, including 389,239 healthy, predominantly Caucasian persons. We also explored sources of heterogeneity between studies and examined effects of systematic adjustment for confounding and intermediary variables. Pooled age-, sex- and smoking-adjusted RRs (95% confidence interval) for overweight, obesity and underweight compared with normal weight were 1.33 (1.24 – 1.43), 1.69 (1.44 – 1.99) and 1.01 (0.85 – 1.20), respectively. Stratified analyses showed that pooled RRs for BMI were higher for studies with longer follow-up (= vs. < 15 years) and younger populations (< vs. = 60 years). Additional adjustment for blood pressure, cholesterol levels and physical activity decreased the RR per 5 BMI units from 1.28 (1.21 – 1.34) to 1.16 (1.11 – 1.21). We conclude that overweight and obesity are associated with a substantially increased CHD risk in Caucasians, whereas underweight is not. Prevention and reduction of overweight and obesity, therefore, remain of importance for preventing CHD.

Antibacterial activity of bovine lactoferrin-derived peptides

Several peptides sharing high sequence homology with lactoferricin B (Lf-cin B) were generated from bovine lactoferrin (Lf) with recombinant chymosin. Two peptides were copurified. one identical to Lf-cin B and another differing from Lf-cin B by the inclusion of a C-terminal alanine (lactoferricin). Two other peptides were copurified from chymosin-hydrolyzed Lf. one differing from Lf-cin B by the inclusion of C-terminal alanyl-leucine and the other being a heterodimer linked by a disulfide bond, These peptides were isolated in a single step from chymosin-hydrolyzed Lf by membrane ton-exchange chromatography and were purified by reverse-phase high-pressure liquid chromatography (HPLC), They were characterized by. N-terminal Edman sequencing, mass spectrometry, and antibacterial activity determination, Pure lactoferricin, prepared from pepsin-hydrolyzed Lf, was purified by standard chromatography techniques, This peptide was analyzed against a number of gram-positive and gram-negative bacteria before and after reduction of its disulfide bond or cleavage after its single methionine residue and was found to inhibit the growth of all the test bacteria at a concentration of 8 mu M or less, Subfragments of lactoferricin were isolated from reduced and cleaved peptide by reverse-phase HPLC, Subfragment 1 (residues I to 10) was active against most of the test microorganisms at concentrations of 10 to 50 mu M. Subfragment 2 (residues 11 to 26) was active against only a few microorganisms at concentrations up to 100 mu M. These antibacterial studies indicate that the activity of lactoferricin Is mainly, but not wholly, due to its N-terminal region.

Analysis of dynamic models for structural insight and model reduction .2. A multi-stage compressor shutdown case-study

In this second paper, the three structural measures which have been developed are used in the modelling of a three stage centrifugal synthesis gas compressor. The goal of this case study is to determine the essential mathematical structure which must be incorporated into the compressor model to accurately model the shutdown of this system. A simple, accurate and functional model of the system is created via three structural measures. It was found that the model can be correctly reduced into its basic modes and that the order of the differential system can be reduced from 51(st) to 20(th). Of the 31 differential equational 21 reduce to algebraic relations, 8 become constants and 2 can be deleted thereby increasing the algebraic set from 70 to 91 equations. An interpretation is also obtained as to which physical phenomena are dominating the dynamics of the compressor add whether the compressor will enter surge during the shutdown. Comparisons of the reduced model performance against the full model are given, showing the accuracy and applicability of the approach. Copyright (C) 1996 Elsevier Science Ltd

Environmental control of potential yield of sunflower in the subtropics

A simple framework was used to analyse the determinants of potential yield of sunflower (Helianthus annuus L.) in a subtropical environment. The aim was to investigate the stability of the determinants crop duration, canopy light interception, radiation use efficiency (RUE), and harvest index (HI) at 2 sowing times and with 3 genotypes differing in crop maturity and stature. Crop growth, phenology, light interception, yield, prevailing temperature, and radiation were recorded and measured throughout the crop cycle. Significant differences in grain yield were found between the 2 sowings, but not among genotypes within each sowing. Mean yields (0% moisture) were 6 . 02 and 2 . 17 t/ha for the first sowing, on 13 September (S1), and the second sowing, on 5 March (S2), respectively. Exceptionally high yields in S1 were due to high biomass assimilation associated with the high radiation environment, high light interception owing to a greater leaf area index, and high RUE (1 . 47-1 . 62 g/MJ) across genotypes. It is proposed that the high RUE was caused by high levels of available nitrogen maintained during crop growth by frequent applications of fertiliser and sewage effluent as irrigation. In addition to differences in the radiation environment, the assimilate partitioned to grain was reduced in S2 associated with a reduction in the duration of grain-filling. Harvest index was 0 . 40 in S1 and 0 . 25 in S2. It is hypothesised that low minimum temperatures experienced in S2 reduced assimilate production and partitioning, causing premature maturation.

Conditional variance reduction by measurements on correlated field modes

We consider the case of two cavity modes of the electromagnetic field, which are coupled via the action of a parametric amplifier. The fields are allowed to leak from the cavity and homodyne measurement is performed on one of the modes. Because of the correlations between the modes, this leads to a reduction of the variance in a quadrature of the other mode, although no measurement is performed on it directly. We discuss how this relates to the Einstein-Podolky-Rosen Gedankenexperiment.

Oral budesonide is as effective as oral prednisolone in active Crohn's disease

Background-The use of corticosteroids in active Crohn's disease often becomes limited by side effects. Budesonide is a potent corticosteroid with low systemic bioavailability due to an extensive first pass liver metabolism. Aims-To compare the efficacy and safety of two dosage regimens of budesonide and prednisolone in patients with active Crohn's disease affecting the ileum and/or the ascending colon. Patients and methods-One hundred and seventy eight patients were randomised to receive budesonide controlled ileal release (CIR) capsules 9 mg once daily or 4.5 mg twice daily, or prednisolone tablets 40 mg once daily. The treatment period was 12 weeks. The primary efficacy variable was clinical remission, defined as a Crohn's Disease Activity Index (CDAI) of 150 or less. Results-After eight weeks of treatment, remission occurred in 60% of patients receiving budesonide once daily or prednisolone and in 42% of those receiving budesonide twice daily (p=0.062). The presence of glucocorticoid associated side effects was similar in all groups; however, moon face was more common in the prednisolone group (p=0.0005). The highest frequency of impaired adrenal function, as measured by a short ACTH test, was found in the prednisolone group (p=0.0023). Conclusions-Budesonide CIR, administered at 9 mg once daily or 4.5 mg twice daily, is comparable to prednisolone in inducing remission in active Crohn's disease. The single dose administration is as promptly effective as prednisolone and represents a simpler and safer therapeutic approach, with a considerable reduction in side effects.

A mathematical model for Escherichia coli debris size reduction during high pressure homogenisation based on grinding theory

Experimental data for E. coli debris size reduction during high-pressure homogenisation at 55 MPa are presented. A mathematical model based on grinding theory is developed to describe the data. The model is based on first-order breakage and compensation conditions. It does not require any assumption of a specified distribution for debris size and can be used given information on the initial size distribution of whole cells and the disruption efficiency during homogenisation. The number of homogeniser passes is incorporated into the model and used to describe the size reduction of non-induced stationary and induced E. coil cells during homogenisation. Regressing the results to the model equations gave an excellent fit to experimental data ( > 98.7% of variance explained for both fermentations), confirming the model's potential for predicting size reduction during high-pressure homogenisation. This study provides a means to optimise both homogenisation and disc-stack centrifugation conditions for recombinant product recovery. (C) 1997 Elsevier Science Ltd.

The secondary passive film for type 304 stainless steel in 0.5 M H2SO4

An examination has been carried out of the secondary passive film on Type 304 stainless steel in 0.5 M H2SO4. The characterization techniques used were electrochemical (potentiodynamic; potentiostatic, and film reduction experiments) and surface analytical. A bilayer model for the secondary passive film is proposed. It appears that next to the metal, there is a modified passive film which controls the electrochemical response; i.e., governs the current for any applied potential. On top of this modified passive film, the experimental data are consistent with a ''porous'' corrosion-product film which adds to the total film thickness but has little influence on the electrochemical response. The composition of the secondary passive film corresponds most probably to a mixed Fe/Cr oxide/hydroxide enriched in Cr3+, With a composition similar to a primary passive film.