Referral patterns in a global store-and-forward telemedicine system

We examined the nature of the referral patterns in the email telemedicine network operated by the Swinfen Charitable Trust with a view to informing long-term resource planning. Over the first six years of operation, 62 hospitals from 19 countries registered with the Trust in order to be able to refer cases for specialist advice; 55 of these hospitals (89%) actually referred cases during this period. During the first six years of operation, nearly 1000 referrals were submitted and answered, from a wide range of specialty areas. Between July 2002 and March 2005 the referral rate rose from 127 to 318 cases per year. The median length of time required to provide a specialist's response was 2.3 days during the first 12 months and 1.8 days during the last 12 months. Five hospitals submitted cases for more than four years (together sending a total of 493 cases). Their activity data showed a trend to declining referral rates over the four-year period, which may represent successful knowledge transfer. There is some evidence that over the last three years the growth in demand has been exponential, while the growth in resources available (i.e. specialists) has been linear, a situation which cannot continue for very long before demand outstrips supply.

Gingerol content of diploid and tetraploid clones of ginger (Zingiber officinale Roscoe)

Ginger (Zingiber officinale, Roscoe), a monocotyledonous, sterile cultigen, is widely used as a spice, flavoring agent, and herbal medicine. The pungency of fresh ginger is due to a series of homologous phenolic ketones of which [6]-gingerol is the major one. The gingerols are thermally unstable and can be converted to their corresponding shogaols, which are present in dried ginger, Fresh rhizomes of 17 clones of Australian ginger, including commercial cultivars and experimental tetraploid clones, were assayed by HPLC for gingerols and shogaols. [6]-Gingerol was identified as the major pungent phenolic compound in all samples, while [8]- and [10]-gingerol occurred in lower concentrations. One cultivar known as Jamaican contained the highest concentrations of all three gingerols and was the most pungent of the clones analyzed. Gingerols were stable in ethanolic solution over a 5-month period when stored at 4 degrees C. Shogaols were not identified in the extracts prepared from fresh rhizomes at ambient temperature, confirming that these compounds are not native constituents of fresh ginger, In contrast to previous findings, this study did not find significant differences in gingerol concentrations between the tetraploid clones and their parent diploid cultivar.

New concepts for distinguishing the hidden patterns of linkage disequilibrium which underlie association between genotypes and complex phenotypes

A disappointing feature of conventional methods for detecting association between DNA variation and a phenotype of interest is that they tell us little about the hidden pattern of linkage disequilibrium (LD) with the functional variant that is actually responsible for the association. This limitation applies to case-control studies and also to the transmission/disequilibrium test (TDT) and other family-based association methods. Here we present a fresh perspective on genetic association based on two novel concepts called 'LD squares' and 'equi-risk alleles'. These describe and characterize the different patterns of gametic LD which underlie genetic association. These concepts lead to a general principle - the Equi-Risk Allele Segregation Principle - which captures the way in which underlying LD patterns affect the transmission patterns of genetic variants associated with a phenotype. This provides a basis for distinguishing the hidden LD patterns and might help to locate the functional variants responsible for the association.

Perceptions of the influence of prescription medicine samples on prescribing by family physicians

Background: The provision of free prescription medicine samples is a common and traditional marketing strategy used by pharmaceutical companies, but concerns have been raised about their influence on physician prescribing behavior and patient safety. Objective: We sought to investigate the knowledge, attitudes, and behaviors of Australian family physicians regarding the use of sample prescription medications. Methods: Qualitative and quantitative techniques were used, including (1) mailed questionnaires to family physicians, (2) semistructured interviews with family physicians, and (3) sample cupboard inventories. Results: A number of issues about samples were identified by the questionnaires (208) and interviews (17 doctors), including insufficient labeling, poor record keeping, diversion of stock (personal use by doctors.. their families, practice staff and pharmaceutical representatives), and wasting of expired stock. Prescription medicine samples also influenced prescribing behavior. Australian doctors were less likely to provide samples to patients on financial grounds compared with a previous study in the United States on medical residents. Six sample cupboards were inventoried. Median wholesale value of sample cupboards was AUD $4959 (range $2395-$8709), with 6% of stock expired. Very little generic medicine was included in the sample cupboards. Conclusions: Better methods are needed to meet legislative requirements and to ensure quality use of medicines (and optimal public health) with respect to prescription medicine samples. Doctors and practice staff require training on the appropriate handling and storage of prescription medications. Alternative ways for distribution of sample medications need to be investigated.

A distributed systems approach to secure Internet mail

One of the obstacles to improved security of the Internet is ad hoc development of technologies with different design goals and different security goals. This paper proposes reconceptualizing the Internet as a secure distributed system, focusing specifically on the application layer. The notion is to redesign specific functionality, based on principles discovered in research on distributed systems in the decades since the initial development of the Internet. Because of the problems in retrofitting new technology across millions of clients and servers, any options with prospects of success must support backward compatibility. This paper outlines a possible new architecture for internet-based mail which would replace existing protocols by a more secure framework. To maintain backward compatibility, initial implementation could offer a web browser-based front end but the longer-term approach would be to implement the system using appropriate models of replication. (C) 2005 Elsevier Ltd. All rights reserved.

A Comparison of Methodologies from Two Longitudinal Community-Based Randomized Controlled Trials of Similar Interventions in Palliative Care: What Worked and What Did Not

Background: Methodological challenges such as recruitment problems and participant burden make clinical trials in palliative care difficult. In 2001-2004, two community-based randomized controlled trials (RCTs) of case conferences in palliative care settings were independently conducted in Australia-the Queensland Case Conferences trial (QCC) and the Palliative Care Trial (PCT). Design: A structured comparative study of the QCC and PCT was conducted, organized by known practical and organizational barriers to clinical trials in palliative care. Results: Differences in funding dictated study designs and recruitment success; PCT had 6 times the budget of QCC. Sample size attainment. Only PCT achieved the sample size goal. QCC focused on reducing attrition through gatekeeping while PCT maximized participation through detailed recruitment strategies and planned for significant attrition. Testing sustainable interventions. QCC achieved a higher percentage of planned case conferences; the QCC strategy required minimal extra work for clinicians while PCT superimposed conferences on normal work schedules. Minimizing participant burden. Differing strategies of data collection were implemented to reduce participant burden. QCC had short survey instruments. PCT incorporated all data collection into normal clinical nursing encounters. Other. Both studies had acceptable withdrawal rates. Intention-to-treat analyses are planned. Both studies included substudies to validate new outcome measures. Conclusions: Health service interventions in palliative care can be studied using RCTs. Detailed comparative information of strategies, successes and challenges can inform the design of future trials. Key lessons include adequate funding, recruitment focus, sustainable interventions, and mechanisms to minimize participant burden.

A theoretical comparison of two optimization methods for radiofrequency drive schemes in high frequency MRI resonators

In this paper, numerical simulations are used in an attempt to find optimal Source profiles for high frequency radiofrequency (RF) volume coils. Biologically loaded, shielded/unshielded circular and elliptical birdcage coils operating at 170 MHz, 300 MHz and 470 MHz are modelled using the FDTD method for both 2D and 3D cases. Taking advantage of the fact that some aspects of the electromagnetic system are linear, two approaches have been proposed for the determination of the drives for individual elements in the RF resonator. The first method is an iterative optimization technique with a kernel for the evaluation of RF fields inside an imaging plane of a human head model using pre-characterized sensitivity profiles of the individual rungs of a resonator; the second method is a regularization-based technique. In the second approach, a sensitivity matrix is explicitly constructed and a regularization procedure is employed to solve the ill-posed problem. Test simulations show that both methods can improve the B-1-field homogeneity in both focused and non-focused scenarios. While the regularization-based method is more efficient, the first optimization method is more flexible as it can take into account other issues such as controlling SAR or reshaping the resonator structures. It is hoped that these schemes and their extensions will be useful for the determination of multi-element RF drives in a variety of applications.

Analysis of cardiac ventricular wall motion based on a three-dimensional electromechanical biventricular model

This paper describes a biventricular model, which couples the electrical and mechanical properties of the heart, and computer simulations of ventricular wall motion and deformation by means of a biventricular model. In the constructed electromechanical model, the mechanical analysis was based on composite material theory and the finite-element method; the propagation of electrical excitation was simulated using an electrical heart model, and the resulting active forces were used to calculate ventricular wall motion. Regional deformation and Lagrangian strain tensors were calculated during the systole phase. Displacements, minimum principal strains and torsion angle were used to describe the motion of the two ventricles. The simulations showed that during the period of systole, (1) the right ventricular free wall moves towards the septum, and at the same time, the base and middle of the free wall move towards the apex, which reduces the volume of the right ventricle; the minimum principle strain (E3) is largest at the apex, then at the middle of the free wall and its direction is in the approximate direction of the epicardial muscle fibres; (2) the base and middle of the left ventricular free wall move towards the apex and the apex remains almost static; the torsion angle is largest at the apex; the minimum principle strain E3 is largest at the apex and its direction on the surface of the middle wall of the left ventricle is roughly in the fibre orientation. These results are in good accordance with results obtained from MR tagging images reported in the literature. This study suggests that such an electromechanical biventricular model has the potential to be used to assess the mechanical function of the two ventricles, and also could improve the accuracy ECG simulation when it is used in heart torso model-based body surface potential simulation studies.

Perceptual speed does not cause intelligence, and intelligence does not cause perceptual speed

There is ongoing debate whether the efficiency of local cognitive processes leads to global cognitive ability or whether global ability feeds the efficiency of basic processes. A prominent example is the well-replicated association between inspection time (IT), a measure of perceptual discrimination speed, and intelligence (IQ), where it is not known whether increased speed is a cause or consequence of high IQ. We investigated the direction of causation between IT and IQ in 2012 genetically related subjects from Australia and The Netherlands. Models in which the reliable variance of each observed variable was specified as a latent trait showed IT correlations of -0.44 and -0.33 with respective Performance and Verbal IQ; heritabilities were 57% (IT), 83% (PIQ) and 77% (VIQ). Directional causation models provided poor fits to the data, with covariation best explained by pleiotropic genes (influencing variation in both IT and IQ). This finding of a common genetic factor provides a better target for identifying genes involved in cognition than genes which are unique to specific traits.