Ferromagnetism, paramagnetism, and a Curie-Weiss metal in an electron-doped Hubbard model on a triangular lattice

Motivated by the unconventional properties and rich phase diagram of NaxCoO2 we consider the electronic and magnetic properties of a two-dimensional Hubbard model on an isotropic triangular lattice doped with electrons away from half-filling. Dynamical mean-field theory (DMFT) calculations predict that for negative intersite hopping amplitudes (t < 0) and an on-site Coulomb repulsion, U, comparable to the bandwidth, the system displays properties typical of a weakly correlated metal. In contrast, for t > 0 a large enhancement of the effective mass, itinerant ferromagnetism, and a metallic phase with a Curie-Weiss magnetic susceptibility are found in a broad electron doping range. The different behavior encountered is a consequence of the larger noninteracting density of states (DOS) at the Fermi level for t > 0 than for t < 0, which effectively enhances the mass and the scattering amplitude of the quasiparticles. The shape of the DOS is crucial for the occurrence of ferromagnetism as for t > 0 the energy cost of polarizing the system is much smaller than for t < 0. Our observation of Nagaoka ferromagnetism is consistent with the A-type antiferromagnetism (i.e., ferromagnetic layers stacked antiferromagnetically) observed in neutron scattering experiments on NaxCoO2. The transport and magnetic properties measured in NaxCoO2 are consistent with DMFT predictions of a metal close to the Mott insulator and we discuss the role of Na ordering in driving the system towards the Mott transition. We propose that the Curie-Weiss metal phase observed in NaxCoO2 is a consequence of the crossover from a bad metal with incoherent quasiparticles at temperatures T > T-* and Fermi liquid behavior with enhanced parameters below T-*, where T-* is a low energy coherence scale induced by strong local Coulomb electron correlations. Our analysis also shows that the one band Hubbard model on a triangular lattice is not enough to describe the unusual properties of NaxCoO2 and is used to identify the simplest relevant model that captures the essential physics in NaxCoO2. We propose a model which allows for the Na ordering phenomena observed in the system which, we propose, drives the system close to the Mott insulating phase even at large dopings.

Algebraic Bethe ansatz for the anisotropic supersymmetric U model

We present an algebraic Bethe ansatz for the anisotropic supersymmetric U model for correlated electrons on the unrestricted 4(L)-dimensional electronic Hilbert space x(n=l)(L)C(4)(where L is the lattice length). The supersymmetry algebra of the local Hamiltonian is the quantum superalgebra U-q[gl(2\1)] and the model contains two symmetry-preserving free real parameters; the quantization parameter q and the Hubbard interaction parameter U. The parameter U arises from the one-parameter family of inequivalent typical four-dimensional irreps of U-q[gl(2\1)]. Eigenstates of the model are determined by the algebraic Bethe ansatz on a one-dimensional periodic lattice.

Pure two-atom squeezed state in spontaneous emission from two non-identical atoms

We calculate the stationary state of the system of two non-identical two-level atoms driven by a finite-bandwidth two-mode squeezed vacuum. It is well known that two identical two-level atoms driven by a broadband squeezed vacuum may decay to a pure state, called the pure two-atom squeezed state, and that the presence of the antisymmetric state can change its purity. Here, we show that for small interatomic separations the stationary state of two non-identical atoms is not sensitive to the presence of the antisymmetric state and is the pure two-atom squeezed state. This effect is a consequence of the fact that in the system of two non-identical atoms the antisymmetric state is no longer the trapping state. We also calculate the squeezing properties of the emitted field and find that the squeezing spectrum of the output field may exhibit larger squeezing than that in the input squeezed vacuum. Moreover, we show that squeezing in the total field attains the optimum value which can ever be achieved in the field emitted by two atoms.

A mathematical model for Escherichia coli debris size reduction during high pressure homogenisation based on grinding theory

Experimental data for E. coli debris size reduction during high-pressure homogenisation at 55 MPa are presented. A mathematical model based on grinding theory is developed to describe the data. The model is based on first-order breakage and compensation conditions. It does not require any assumption of a specified distribution for debris size and can be used given information on the initial size distribution of whole cells and the disruption efficiency during homogenisation. The number of homogeniser passes is incorporated into the model and used to describe the size reduction of non-induced stationary and induced E. coil cells during homogenisation. Regressing the results to the model equations gave an excellent fit to experimental data ( > 98.7% of variance explained for both fermentations), confirming the model's potential for predicting size reduction during high-pressure homogenisation. This study provides a means to optimise both homogenisation and disc-stack centrifugation conditions for recombinant product recovery. (C) 1997 Elsevier Science Ltd.

A two-dimensional fuzzy random model of soil pore structure

A new conceptual model for soil pore-solid structure is formalized. Soil pore-solid structure is proposed to comprise spatially abutting elements each with a value which is its membership to the fuzzy set ''pore,'' termed porosity. These values have a range between zero (all solid) and unity (all pore). Images are used to represent structures in which the elements are pixels and the value of each is a porosity. Two-dimensional random fields are generated by allocating each pixel a porosity by independently sampling a statistical distribution. These random fields are reorganized into other pore-solid structural types by selecting parent points which have a specified local region of influence. Pixels of larger or smaller porosity are aggregated about the parent points and within the region of interest by controlled swapping of pixels in the image. This creates local regions of homogeneity within the random field. This is similar to the process known as simulated annealing. The resulting structures are characterized using one-and two-dimensional variograms and functions describing their connectivity. A variety of examples of structures created by the model is presented and compared. Extension to three dimensions presents no theoretical difficulties and is currently under development.

Characterizing QALYs under a general rank dependent utility model

This paper provides a characterization of QALYs, the most important outcome measure in medical decision making, in the context of a general rank dependent utility model. We show that both for chronic and for nonchronic health states the characterization of QALYs depends on intuitive conditions. This facilitates the assessment of the validity of QALYs in rank dependent non-expected utility theories and a comparison with other utility based measures of health.

Non-expression of insulin-like growth factor-I receptor is associated with apoptosis: an ultrastructural study on rat ameloblasts

Insulin-like growth factor-I (IGF-I) is a preiotrophic polypeptide which appears to have roles both as a circulating endocrine hormone and as a locally synthesized paracrine or autocrine tissue factor. IGF-I plays a major role in regulating the growth of cells in vivo and in vitro and initiates metabolic and mitogenic processes in a wide variety of cell types by binding to specific type I receptors in the plasma membrane, In this study, we report the distribution of IGF-I receptors in odontogenic cells at the ultrastructural level using the high resolution protein A-gold technique, In the pre-secretory stage, very little gold label was visible over the ameloblasts and odontoblasts, During the secretory stage the label was mostly seen in association with the cell membranes and endoplasmic reticulum of the ameloblasts. Lysosome-like elements in the post-secretory stage were labelled as well as multivesicular dense bodies, Very little labelling was encountered in the ameloblasts in the transitional stage, where apoptotic bodies were clearly visible, The maturation stage also exhibited labelling of the secretory-like granules in the distal surface. The presence of gold particles over the plasma membrane is an indication that IGF-I receptor is a membrane-bound receptor. Furthermore, the intracellular distribution of the label over the endoplasmic reticulum supports the local synthesis of the IGF-I receptor. The absence of labelling over the transitional ameloblasts suggests that the transitional stage may require the non-expression of IGF-I as a prerequiste or even a trigger for apoptosis.

The use of strategic visioning to enhance local tourism planning in periphery communities

Tourism has had a profound impact upon destinations worldwide, and although this impact has been positive for many destinations, there are numerous examples where tourism has adversely impacted upon the environment and social fabric of the destination community (Coccossis 1996; Murphy 1985). The negative impacts of tourism have been attributed, among other things, to inadequate or non-existent planning for development (Gunn 1994; Hall2000). This has led to increased calls for tourism planning to offset some of the negative impacts that tourism can have on the destination community. While a number of approaches have been advocated, a collaborative philosophy, based on the principles of sustainability, is more likely to result in acceptable and successful policies and programmes for tourism destinations (Farrell1986; Jamal & Getz 1995; Maitland 2002; Minca & Getz 1995). Such an approach focuses on cooperation and broader based participation in tourism planning and decision-making between stakeholders to lead to agreement on planning directions and goals, with one of the primary objectives of collaborative arrangements being to develop a strategic vision for a destination (Bramwell & Lane 2000). [Extract from introduction]

Detecting environmental impacts on metapopulations of mound spring invertebrates - Assessing an incidence function model

We use a stochastic patch occupancy model of invertebrates in the Mound Springs ecosystem of South Australia to assess the ability of incidence function models to detect environmental impacts on metapopulations. We assume that the probability of colonisation decreases with increasing isolation and the probability of extinction is constant across spring vents. We run the models to quasi-equilibrium, and then impose an impact by increasing the local extinction probability. We sample the output at various times pre- and postimpact, and examine the probability of detecting a significant change in population parameters. The incidence function model approach turns out to have little power to detect environmental impacts on metapopulations with small numbers of patches. (C) 2001 Elsevier Science Ltd. All rights reserved.

Analysis of thermodynamic non-ideality in terms of protein solvation

The effects of thermodynamic non-ideality on the forms of sedimentation equilibrium distributions for several isoelectric proteins have been analysed on the statistical-mechanical basis of excluded volume to obtain an estimate of the extent of protein solvation. Values of the effective solvation. parameter delta are reported for ellipsoidal as well as spherical models of the proteins, taken to be rigid, impenetrable macromolecular structures. The dependence of the effective solvated radius upon protein molecular mass exhibits reasonable agreement with the relationship calculated for a model in which the unsolvated protein molecule is surrounded by a 0.52-nm solvation shell. Although the observation that this shell thickness corresponds to a double layer of water molecules may be of questionable relevance to mechanistic interpretation of protein hydration, it augurs well for the assignment of magnitudes to the second virial coefficients of putative complexes in the quantitative characterization of protein-protein interactions under conditions where effects of thermodynamic non-ideality cannot justifiably be neglected. (C) 2001 Elsevier Science B.V. All rights reserved.

Genetic and non-genetic factors affecting birth-weight and adult body mass index

Birthweight affects neonatal mortality and morbidity and has been used as a marker of foetal undernutrition in studies of prenatal effects on adult characteristics. It is potentially influenced by genetic and environmental influences on the mother, and effects of foetal genotype, which is partially derived from the maternal genotype. Interpretations of variation in birthweight and associated characteristics as being due to prenatal environment ignore other possible modes of materno-foetal transmission. Subjects were adult twins recruited through the Australian Twin Registry, aged 17 to 87 years, and the sample comprised 1820 men and 4048 women. Twins reported their own birthweight as part of a health questionnaire. Body Mass Index (BMI) was calculated from self-reports of height and weight. Correlations between co-twins' birthweights were high for both monozygotic (r = 0.77) and dizygotic (r = 0.67) pairs, leading to substantial estimates of shared environmental effects (56% of variance) with significant additive genetic (23%) and non-shared environmental (21%) components. Adult BMI was mainly influenced by genetic factors, both additive (36% of variance) and nonadditive (35%). The correlation between birthweight and BMI was positive, in that heavier babies became on average more obese adults. A bivariate model of birthweight and adult BMI showed significant positive genetic (rg = 0.16, p = 0.005) and environmental (re = 0.08, p = 0.000011) correlations. Intra-uterine environmental or perinatal influences shared by cotwins exercise a strong influence on birthweight, but the factors which affect both birthweight and adult BMI are partly genetic and partly non-shared environmental.

Fitting a mixture model to three-mode three-way data with missing information

When the data consist of certain attributes measured on the same set of items in different situations, they would be described as a three-mode three-way array. A mixture likelihood approach can be implemented to cluster the items (i.e., one of the modes) on the basis of both of the other modes simultaneously (i.e,, the attributes measured in different situations). In this paper, it is shown that this approach can be extended to handle three-mode three-way arrays where some of the data values are missing at random in the sense of Little and Rubin (1987). The methodology is illustrated by clustering the genotypes in a three-way soybean data set where various attributes were measured on genotypes grown in several environments.

Irradiation-induced oral candidiasis in an experimental murine model

The aim of this experiment was to establish a mouse model of irradiation-induced oral candidiasis and to explore the cellular populations and mechanisms by which the infection is cleared from the oral mucosa. BALB/c mice received irradiation to the head and neck equivalent to 800 Rad using a Cobalt 60 gamma source. Both irradiated and non-irradiated mice were infected orally with 1 X 10(8) Candida albicans yeasts. Compared with untreated controls, irradiated animals developed a more severe infection of longer duration, with hyphae penetrating the oral mucosa. Monoclonal antibody depletion of CD4(+) but not CD8(+) T cells from the systemic circulation prolonged the infection in irradiated mice, but not in controls. Supernatants of submandibular and superficial cervical lymph node cultures from irradiated animals demonstrated significantly higher titers of interleukin-12, but similar levels of interferon-gamma compared with controls. Screening for cytokine production by an RNase protection assay detected only macrophage migration inhibition factor in irradiated and non-irradiated oral tissues from day 8 onwards. The results of this study demonstrate a requirement for CD4(+) T cells in the recovery from oral candidiasis induced by head and neck irradiation in mice, and are consistent with a role for Th-1-type cytokines in host resistance.

The effects of interleukin-10 depletion in vivo on the immune response to Porphyromonas gingivalis in a murine model

Background: The immune response to Porphyromonas gingivalis in the mouse abscess model is known to be dependent upon CD4 T-cell activation and the regulatory role of cytokines. The role of interleukin-10 (IL-10) in this mouse model was examined in vivo. Methods: One-week-old, female BALB/c mice were divided into 4 groups. Groups 1 and 2 were given intraperitoneal (ip) injections of phosphate buffered saline (PBS) weekly for 5 weeks. Group 3 was given an ip injection of rat immunoglobulin. Group 4 was injected with rat anti-IL-10 antibodies. At week 6, group 1 was sham-immunized with PBS, and groups 2, 3, and 4 were injected with P gingivalis lipopolysaccharide (Pg-LPS) weekly for 2 weeks. One week after the final immunization, delayed-type hypersensitivity (DTH) was assessed by footpad swelling to Pg-LPS. The level of serum antibodies to Pg-LPS and IFN-gamma (IFN-gamma) was determined by enzyme-linked immunosorbent assay. Dorsal abscess formation induced by the injection of viable P gingivalis was examined daily for 30 days. Results: The footpad swelling of the anti-IL-10-treated group (group 4) was significantly higher than that of groups 1 to 3. Similarly, the serum IFN-gamma level in group 4 was much higher than that of the other experimental groups. There was no significant difference in serum IgG antibodies to Pg-LPS in any of the experimental groups. However, the level of IgM antibodies in group 4 mice was significantly lower than that in groups 2 and 3. In addition, serum IgG1 was suppressed in group 4 mice, while IgG2a antibodies were raised. However, there was no difference observed between the levels of IgG2b and IgG3 antibodies in any group of mice. The lesions in sham-immunized mice (group 1) persisted for 30 days, and those in group 2 and 3 were undetected by day 18 and 20, respectively. In sharp contrast, lesions in group 4 had healed completely by day 13. Conclusions: This study has shown that IL-10 depletion in vivo in P gingivalis LPS-induced immune response in mice led to an elevated DTH response, an increase in serum IFN-gamma levels, and raised levels of IgG and IgG2a antibodies. Treatment with anti-IL-10 antibodies resulted in suppressed IgG I and IgM responses and a more rapid healing of abscesses than in non-IL-10-depleted mice. These results suggest that IL-10 depletion in Pg-LPS-induced immune response in mice may lead to a Th1-like immune response and provide strong protection against a subsequent challenge with live P gingivalis in an abscess model.

Experimental investigation of liquid flow shift due to gas cross flow in non-wetted packed beds

An experimental study has been carried out for the gas-liquid two-phase flow in a packed bed simulating conditions of the gas and liquid flows in the lower part of blast furnace. The localised liquid flow phenomenon in presence of gas cross flow, which usually occurs around the cohesive zone and raceway in blast furnace, was investigated in detail. Such liquid flow is characterised in terms of liquid shift distance or liquid shift angle that can effectively be measured by the experiments involved in the current study. It is found that liquid shift angle does not significantly increase or decrease with different packing depth. This finding supports the hypothesis of the force balance model where a vectorial relationship among acting forces, i.e. gas drag force, gravitational force and solid-liquid friction force, and liquid shift angle does exist. Liquid shift angle is inversely proportional to particle size and liquid density, and proportional to square of gas superficial velocity, but is almost independent on liquid flowrate and liquid viscosity. The gas-liquid drag coefficient, an important aspect for quantifying the interaction between gas and liquid flows, was conceptually modified based on the discrete feature of liquid flow through a packed bed and evaluated by the combined theoretical and experimental investigation. Experimental measurements suggest that the gas-liquid drag coefficient is approximately a constant (C-DG(')=5.4+/-1.0) and is independent on liquid properties, gas velocity and packing structure. The result shows a good agreement with previous experimental data and prediction of the existing liquid flow model.