Evolution of the secondary structure of the rRNA internal transcribed spacer 2 (ITS2) in hard ticks (Ixodidae, Arthropoda)

ITS2 sequences are used extensively in molecular taxonomy and population genetics of arthropods and other animals yet little is known about the molecular evolution of ITS2. We studied the secondary structure of ITS2 in species from each of the six main lineages of hard ticks (family Ixodidae). The ITS2 of these ticks varied in length from 679 bp in Ixodes scapularis to 1547 bp in Aponomma concolor. Nucleotide content varied also: the ITS2 of ticks from the Prostriata lineage (Ixodes spp.) had 46-49% GC whereas ITS2 sequences of ticks from the Metastriata lineage (all other hard ticks) had 61-62% GC. Despite variation in nucleotide sequence, the secondary structure of the ITS2 of all of these ticks apparently has five domains. Stems 1, 3, 4 and 5 of this secondary structure were obvious in all of the species studied. However, stem 2 was not always obvious despite the fact that it is flanked by highly conserved sequence motifs in the adjacent stems, stems 1 and 3. The ITS2 of hard ticks has apparently evolved mostly by increases and decreases in length of the nucleotide sequences, which caused increases, and decreases in the length of stems of the secondary structure. This is most obvious when stems of the secondary structures of the Prostriata (Ixodes spp.) are compared to those of the Metastriata (all other hard ticks). Increases in the size of the ITS2 may have been caused by replication slippage which generated large repeats, like those seen in Haemaphysalis humerosa and species from the Rhipicepalinae lineage, and the small repeats found in species from the other lineages of ticks.

Solution structure of CnErg1 (Ergtoxin), a HERG specific scorpion toxin

The three-dimensional structure of chemically synthesized CnErg1 (Ergtoxin), which specifically blocks HERG (human ether-a-go-go-related gene) K+ channels, was determined by nuclear magnetic resonance spectroscopy. CnErg1 consists of a triple-stranded beta-sheet and an a-helix, as is typical of K+ channel scorpion toxins. The peptide structure differs from the canonical structures in that the first beta-strand is shorter and is nearer to the second beta-strand rather than to the third beta-strand on the C-terminus. There is also a large hydrophobic patch on the surface of the toxin, surrounding a central lysine residue, Lys13. We postulate that this hydrophobic patch is likely to form part of the binding surface of the toxin. (C) 2003 Published by Elsevier Science B.V. on behalf of the Federation of European Biochemical Societies.

Genetic structure of Mycosphaerella fijiensis populations from Australia, Papua New Guinea and the Pacific Islands

Single-copy restriction fragment length polymorphism (RFLP) markers were used to determine the genetic structure of Mycosphaerella fijiensis, the cause of black leaf streak (black Sigatoka) disease of banana and plantain, in the Torres Strait, Papua New Guinea (PNG), and the Pacific Islands. A moderate level of genetic variation was observed in all populations with genotypic diversity values of 60-78% of the theoretical maximum, and gene diversity (H) values between 0.269 and 0.336. All populations were at gametic equilibrium, and with the high level of genotypic diversity observed this indicated that sexual reproduction has a major role in the genetic structure of the M. fijiensis populations examined. Population differentiation was tested on several hierarchical scales. No evidence of population differentiation was observed between sites on Mer Island. A moderate level of population differentiation was observed within the Torres Strait, between Badu and Mer Islands (F-ST = 0.097). On a regional scale, the greatest differentiation was found between the populations of the Torres Strait and the Pacific. Populations from these regions were more closely related to the PNG population than to each other, suggesting they were founded in separate events from the same population.

A technique to assess small-scale heterogeneity of chemical properties in soil aggregates

A new method is presented which allows the separation of the soil aggregate exterior from the aggregate core. The method employs a combination of aggregate freezing with rapid separation of aggregate exteriors using ultrasonic energy. The factors influencing the thickness of the removed aggregate surface layer include water content of the aggregate prior to freezing, temperature difference between that of the frozen aggregate and that of the liquid it is submerged in during sonification, sonification time and energy, and the type of the immersion liquid. The success of the method and the thickness of the removed aggregate surface were examined using barium ( Ba2+) as a tracer. Barium ( as BaCl2) is rapidly absorbed by soil and is present at only very low levels in natural soils. Surface layers of 0.2 - 0.4 cm thickness were successfully removed from aggregates of 1 - 4 cm diameter. Two examples are given from soils in northern NSW to demonstrate the occurrence of small- scale heterogeneity in soil chemical properties. Compared with the surface fraction, a 4 - 7% higher calcium concentration was found in the core fraction of a clay loam soil ( Dermosol). Conversely, on a cracking clay soil ( Vertosol), atrazine concentration was around 15 times greater in the aggregate surface fractions compared with core fractions. Compared with the traditional estimation of soil chemical properties on homogenised bulk soil samples, it is suggested that separate analysis of aggregate surface and core fractions could provide useful additional information on the relationships between soil properties and environmental responses.

Variation of the crystalline structure of coal char during gasification

The variation of the crystallite structure of several coal chars during gasification in air and carbon dioxide was studied by high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) techniques. The XRD analysis of the partially gasified coal chars, based on two approaches, Scherrer's equation and Alexander and Sommer's method, shows a contradictory trend of the variation of the crystallite height with carbon conversion, despite giving a similar trend for the crystallite width change. The HRTEM fringe images of the partially gasified coal chars indicate that large and highly ordered crystallites exist at conversion levels as high as 86%. It is also demonstrated that the crystalline structure of chars can be very different although their pore structures are similar, suggesting a combination of crystalline structure analysis with pore structure analysis in studies of carbon gasification.

Large-eddy simulation of heat transfer downstream of a backward-facing step

Large-eddy simulation is used to predict heat transfer in the separated and reattached flow regions downstream of a backward-facing step. Simulations were carried out at a Reynolds number of 28 000 (based on the step height and the upstream centreline velocity) with a channel expansion ratio of 1.25. The Prandtl number was 0.71. Two subgrid-scale models were tested, namely the dynamic eddy-viscosity, eddy-diffusivity model and the dynamic mixed model. Both models showed good overall agreement with available experimental data. The simulations indicated that the peak in heat-transfer coefficient occurs slightly upstream of the mean reattachment location, in agreement with experimental data. The results of these simulations have been analysed to discover the mechanisms that cause this phenomenon. The peak in heat-transfer coefficient shows a direct correlation with the peak in wall shear-stress fluctuations. It is conjectured that the peak in these fluctuations is caused by an impingement mechanism, in which large eddies, originating in the shear layer, impact the wall just upstream of the mean reattachment location. These eddies cause a 'downwash', which increases the local heat-transfer coefficient by bringing cold fluid from above the shear layer towards the wall.

Sexual abuse and suicidality: gender differences in a large community sample of adolescents

Objective: A cross-sectional study of gender specific relationships between self-reported child sexual abuse and suicidality in a community sample of adolescents. Method: Students aged 14 years on average (N = 2,485) from 27 schools in South Australia completed a questionnaire including items on sexual abuse and suicidality, and measures of depression (Centre for Epidemiological Studies Depression Scale), hopelessness (Beck Hopelessness Scale), and family functioning (McMaster Family Assessment Device General Functioning Subscale). Data analysis included logistic regression. Results: In boys, self-report sexual abuse is strongly and independently associated with suicidal thoughts, plans, threats, deliberate self-injury, and suicide attempts, after controlling for current levels of depression, hopelessness, and family dysfunction. In girls, the relationship between sexual abuse and suicidality is mediated fully by depression, hopelessness, and family dysfunction. Girls who report current high distress about sexual abuse, however, have a threefold increased risk of suicidal thoughts and plans, compared to non-abused girls. Boys who report current high distress about sexual abuse have 10-fold increased risk for suicidal plans and threats, and 15-fold increased risk for suicide attempts, compared to non-abused boys. Fifty-five percent (n = 15) of sexually abused boys attempted suicide versus 29% (n = 17) girls. Conclusions: A history of sexual abuse should alert clinicians, professionals and caters in contact with adolescents, to greatly increased risks of suicidal behavior and attempts in boys, even in the absence of depression and hopelessness. Distress following sexual abuse, along with depression and hopelessness indicate increased risk of suicidal behavior in girls, as well as boys. (C) 2004 Published by Elsevier Ltd.

A practical tool to identify water bodies with potential for mosquito habitat under mangrove canopy: Large-scale airborne scanning in the thermal band

We address the practical issue of using thermal image data without adjustment or calibration for projects which do not require actual temperatures per se. Large scale airborne scanning in the thermal band at 8.5–13 μm was obtained for a mangrove and salt marsh in subtropical eastern Australia. For open sites, the raw image values were strongly positively correlated with ground level temperatures. For sites under mangrove canopy cover, image values indicated temperatures 2–4°C lower than those measured on the ground. The raw image was useful in identifying water bodies under canopy and has the potential for locating channel lines of deeper water. This could facilitate modification to increase flushing in the system, thereby reducing mosquito larval survival.

Experimental validation of the regulated expression of large numbers of non-coding RNAs from the mouse genome

Recent large-scale analyses of mainly full-length cDNA libraries generated from a variety of mouse tissues indicated that almost half of all representative cloned sequences did flat contain ail apparent protein-coding sequence, and were putatively derived from non-protein-coding RNA (ncRNA) genes. However, many of these clones were singletons and the majority were unspliced, raising the possibility that they may be derived from genomic DNA or unprocessed pre-rnRNA contamination during library construction, or alternatively represent nonspecific transcriptional noise. Here we Show, using reverse transcriptase-dependent PCR, microarray, and Northern blot analyses, that many of these clones were derived from genuine transcripts Of unknown function whose expression appears to be regulated. The ncRNA transcripts have larger exons and fewer introns than protein-coding transcripts. Analysis of the genomic landscape around these sequences indicates that some cDNA clones were produced not from terminal poly(A) tracts but internal priming sites within longer transcripts, only a minority of which is encompassed by known genes. A significant proportion of these transcripts exhibit tissue-specific expression patterns, as well as dynamic changes in their expression in macrophages following lipopolysaccharide Stimulation. Taken together, the data provide strong support for the conclusion that ncRNAs are an important, regulated component of the mammalian transcriptome.

Influence of lattice interactions on the jahn-teller distortion of the [Cu(H2O)(6)](2+) ion: Dependence of the crystal structure of K-2[Cu(H2O)(6)](SO4)(2x)(SeO4)(2-2x) upon the sulfate/selenate ratio

The temperature dependence of the structure of the mixed-anion Tutton salt K-2[Cu(H2O)(6)](SO4)(2x)(SeO4)(2-2x) has been determined for crystals with 0, 17, 25, 68, 78, and 100% sulfate over the temperature range of 85-320 K. In every case, the [Cu(H2O)(6)](2+) ion adopts a tetragonally elongated coordination geometry with an orthorhombic distortion. However, for the compounds with 0, 17, and 25% sulfate, the long and intermediate bonds occur on a different pair of water molecules from those with 68, 78, and 100% sulfate. A thermal equilibrium between the two forms is observed for each crystal, with this developing more readily as the proportions of the two counterions become more similar. Attempts to prepare a crystal with approximately equal amounts of sulfate and selenate were unsuccessful. The temperature dependence of the bond lengths has been analyzed using a model in which the Jahn-Teller potential surface of the [Cu(H2O)(6)](2+) ion is perturbed by a lattice-strain interaction. The magnitude and sign of the orthorhombic component of this strain interaction depends on the proportion of sulfate to selenate. Significant deviations from Boltzmann statistics are observed for those crystals exhibiting a large temperature dependence of the average bond lengths, and this may be explained by cooperative interactions between neighboring complexes.

Stock structure of Spanish mackerel Scomberomorus commerson along the Australian east coast deduced from parasite data

The parasite fauna of Spanish mackerel Scomberomorus commerson from three regions off eastern Australia was examined for evidence of separate stocks. The abundance of five metacestodes was very similar in all areas suggesting that extensive mixing of the fish occurs along the coast, unlike the Situation across northern Australia where large differences have been found between regions. The similarity in abundances of two metacestodes from Townsville fish and south-east Queensland fish Suggests that these two regions have fish with very similar histories. The data lead to the conclusion that the seasonal fishery for Spanish mackerel off south-east Queensland is based on a random group of fish from the same origin as fish sampled off Townsville and is not a subpopulation that moves south each year. (c) 2006 The Fisheries Society of the British Isles.

The 2.1 angstrom crystal structure of copGFP, a representative member of the copepod clade within the green fluorescent protein superfamily

The green fluorescent protein (avGFP), its variants, and the closely related GFP-like proteins are characterized structurally by a cyclic tri-peptide chromophore located centrally within a conserved beta-can fold. Traditionally, these GFP family members have been isolated from the Cnidaria although recently, distantly related GFP-like proteins from the Bilateria, a sister group of the Cnidaria have been described, although no representative structure from this phylum has been reported to date. We have determined to 2.1 angstrom resolution the crystal structure of copGFP, a representative GFP-like protein from a copepod, a member of the Bilateria. The structure of copGFP revealed that, despite sharing only 19% sequence identity with GFP, the tri-peptide chromophore (Gly57-Tyr58-Gly59) of copGFP adopted a cis coplanar conformation within the conserved beta-can fold. However, the immediate environment surrounding the chromophore of copGFP was markedly atypical when compared to other members of the GFP-superfamily, with a large network of bulky residues observed to surround the chromophore. Arg87 and Glu222 (GFP numbering 96 and 222), the only two residues conserved between copGFP, GFP and GFP-like proteins are involved in autocatalytic genesis of the chromophore. Accordingly, the copGFP structure provides an alternative platform for the development of a new suite of fluorescent protein tools. Moreover, the structure suggests that the autocatalytic genesis of the chromophore is remarkably tolerant to a high degree of sequence and structural variation within the beta-can fold of the GFP superfamily. (c) 2006 Elsevier Ltd . All rights reserved.

The large peculiar velocity of the cD galaxy in Abell 3653

We present a catalogue of galaxies in Abell 3653 from observations made with the 2-degree field (2dF) spectrograph at the Anglo-Australian Telescope. Of the 391 objects observed, we find 111 are bona fide members of Abell 3653. We show that the cluster has a velocity of cz= 32 214 +/- 83 km s(-1) (z= 0.10 738 +/- 0.00 027), with a velocity dispersion typical of rich, massive clusters of sigma(cz)= 880(-54)(+66). We find that the cD galaxy has a peculiar velocity of 683 +/- 96 km s(-1) in the cluster rest frame - some 7 sigma away from the mean cluster velocity, making it one of the largest and most significant peculiar velocities found for a cD galaxy to date. We investigate the cluster for signs of substructure, but do not find any significant groupings on any length scale. We consider the implications of our findings on cD formation theories.

Maternal health during pregnancy and perinatal mortality in Bangladesh: evidence form a large-scale community-based clinical trial

Perinatal mortality is very high in Bangladesh. In this setting, few community-level studies have assessed the influence of underlying maternal health factors on perinatal outcomes. We used the data from a community-based clinical controlled trial conducted between 1994 and 1997 in the catchment areas of a large MCH/FP hospital located in Mirpur, a suburban area of Dhaka in Bangladesh, to investigate the levels of perinatal mortality and its associated maternal health factors during pregnancy. A total of 2007 women were followed after recruitment up to delivery, maternal death, or until they dropped out of the study. Of these, 1584 who gave birth formed our study subjects. The stillbirth rate was 39.1 per 1000 births [95% confidence interval (CI) 39.0, 39.3] and the perinatal mortality rate (up to 3 days) was 54.3 per 1000 births [95% CI 54.0, 54.6] among the study population. In the fully adjusted logistic regression model, the risk of perinatal mortality was as high as 2.7 times [95% CI 1.5, 4.9] more likely for women with hypertensive disorders, 5.0 times [95% CI 2.3, 10.8] as high for women who had antepartum haemorrhage and 2.6 times [95% CI 1.2, 5.8] as high for women who had higher haemoglobin levels in pregnancy when compared with their counterparts. The inclusion of potential confounding variables such as poor obstetric history, sociodemographic characteristics and preterm delivery influenced only marginally the net effect of important maternal health factors associated with perinatal mortality. Perinatal mortality in the study setting was significantly associated with poor maternal health conditions during pregnancy. The results of this study point towards the urgent need for monitoring complications in high-risk pregnancies, calling for the specific components of the safe motherhood programme interventions that are designed to manage these complications of pregnancy.

The Hierarchical Structure of the Firm: A Geometric Perspective

This paper incorporates hierarchical structure into the neoclassical theory of the firm. Firms are hierarchical in two respects: the organization of workers in production and the wage structure. The firm’s hierarchy is represented as the sector of a circle, where the radius represents the hierarchy’s height, the width of the sector represents the breadth of the hierarchy at a given height, and the angle of the sector represents span of control for any given supervisor. A perfectly competitive firm then chooses height and width, as well as capital inputs, in order to maximize profit. We analyze the short run and long run impact of changes in scale economies, input substitutability and input and output prices on the firm’s hierarchical structure. We find that the firm unambiguously becomes more hierarchical as the specialization of its workers increases or as its output price increases relative to input prices. The effect of changes in scale economies is contingent on the output price. The model also brings forth an analysis of wage inequality within the firm, which is found to be independent of technological considerations, and only depends on the firm’s wage schedule.