A study of the effects of postcure treatments on polyester-melamine coating matrices

The effect of postcure high energy (gamma), ultraviolet (UV) and thermal treatment on the properties of polyester-melamine clearcoats of a range of compositions has been investigated. Two initial cure conditions were used, of which one was '' optimally '' cured and the other undercured. It was found that postcure treatments, particularly gamma and UV, led to coatings of similar mechanical and thermal properties irrespective of initial cure, although the change in properties on postcure treatment was greater for the under-cured samples. The results were interpreted in terms of the effect of the treatments on the structure of the crosslinked matrices. The study suggests the possibility of the development of a dual-cure process for polyester-melamines, whereby cure optimization and property improvement can be achieved. This could also be used to '' correct '' for small variations in thermal cure levels brought about by adventitious online fluctuations in cure oven conditions.

Anodizing treatments for magnesium alloys and their effecton corrosion resistance in various environments

This paper reviews various aspects of anodizing of magnesium alloys, such as the basics, processes, properties and applications. It systematically summarises the existing fundamental studies and technical developments of anodizing of magnesium alloys, and concludes that new anodizing processes based on electrolytic plasma anodizing that convert the surface of a magnesium alloy into a hard ceramic coating in an electrolytic bath using high energy electric discharges can offer improved wear and corrosion resistance. These new anodized coatings are often claimed to perform better than the traditional ones obtained through older anodizing processes, such as DOW17 or HAE. The new anodizing techniques are chromate free and hence environment friendly. It is expected that more cost-effective, environment-friendly and non-toxic anodizing techniques will be developed and applied to magnesium alloy components in the future.

Effects of postharvest methyl jasmonate treatments against Botrytis cinerea on Geraldton waxflower (Chamelaucium uncinatum)

Cut Geraldton waxflower (Chamelaucium uncinatum Schauer) flowers are often infected with Botrytis cinerea. Release of infection from quiescence can cause ethylene production by invaded host tissues and result in flower abscission. Postharvest floral organ abscission is a major problem for the commercial waxflower industry. Methyl jasmonate (MeJA) occurs naturally in plant tissue and has a signalling role in eliciting induced systemic resistance against disease. MeJA treatments have been shown to suppress B. cinerea infecting cut rose flowers. The present experiments investigated the potential of exogenous MeJA treatments for B. cinerea management on harvested waxflower. MeJA treatments of 10 and 100 L liquid MeJA/L of air applied to cv. Purple Pride and 1 L MeJA/L to cv. Mullering Brook gave reductions in disease severity for uninoculated stems. However, concentrations of 100 L MeJA/L applied to Purple Pride in addition to 1 and 10 L MeJA/L applied to Mullering Brook increased the incidence of floral organ fall. Flower abscission upon treatment with MeJA may be due to induced systemic resistance-associated upregulation of ethylene biosynthesis. MeJA treatments had no direct effect on B. cinerea hyphal elongation in vitro. Collectively, these results show that while MeJA treatment may elicit defence in waxflower against Botrytis, the chemical also causes floral organ fall. Thus, exogenous MeJA treatments do not have potential for B. cinerea management on harvested waxflower.

Acibenzolar-S-methyl and methyl jasmonate treatments of glasshouse-grown freesias suppress post-harvest petal specking caused by Botrytis cinerea

Compounds that activate host plant defence responses potentially offer socio-environmentally sound alternative methods for disease control. In a series of glasshouse trials over 2 years, pre-harvest sprays with acibenzolar-S-methyl (ASM) and methyl jasmonate (MeJA) were tested for suppression of post-harvest infection of cut Freesia hybrida L. flowers by Botrytis cinerea. For the ASM treatments, variability in reducing the incidence of B. cinerea disease was observed between years freesia varieties, incubation temperatures and ASM concentrations. In the first year, the greatest reductions in lesion numbers on ASM-treated var. 'Cote d'Azur' were recorded using 2.86 mM ASM. For three different post-harvest temperature regimes, the relative reductions in lesion numbers, compared to untreated controls, were 45% at 5 degrees C, 40% at 12 degrees C and 30% at 20 degrees C, respectively. In the second year, lesion numbers were most reduced using 1.43 mM ASM to treat freesia var. 'Dukaat' flowers. Here, the relative reductions were to 44% at 5 degrees C, 26% at 12 degrees C and 51% at 20 degrees C. MeJA treatments were, in general, more consistently effective than ASM treatments in reducing lesion numbers and lesion diameters on cut freesia flowers. MeJA-treated (0.2 mM) freesia flowers (var. 'Dukaat') incubated at 20 degrees C showed relative reductions of 62%, and 45% for lesion number and lesion diameter, respectively. The differing efficacy between ASM and MeJA treatments could be attributed to their differential abilities to induce the salicylic acid (SA)-mediated vs. the jasmonic acid (JA)-mediated host defence pathways, respectively.

Postharvest characteristics and handling of litchi fruit - an overview

Litchi ( Litchi chinensis Sonn.) is a tropical to subtropical crop that originated in South-East Asia. Litchi fruit are prized on the world market for their flavour, semi-translucent white aril and attractive red skin. Litchi is now grown commercially in many countries and production in Australia, China, Israel, South Africa and Thailand has expanded markedly in recent years. Increased production has made significant contributions to economic development in these countries, especially those in South-East Asia. Non-climacteric litchi fruit are harvested at their visual and organoleptic optimum. They are highly perishable and, consequently, have a short life that limits marketability and potential expansion of demand. Pericarp browning and pathological decay are common and important defects of harvested litchi fruit. Postharvest technologies have been developed to reduce these defects. These technologies involve cooling and heating the fruit, use of various packages and packaging materials and the application of fungicides and other chemicals. Through the use of fungicides and refrigeration, litchi fruit have a storage life of about 30 days. However, when they are removed from storage, their shelf life at ambient temperature is very short due to pericarp browning and fruit rotting. Low temperature acclimation or use of chitsoan as a coating can extend the shelf life. Sulfur dioxide fumigation effectively reduces pericarp browning, but approval from Europe, Australia and Japan for this chemical is likely to be withdrawn due to concerns over sulfur residues in fumigated fruit. Thus, sulfur-free postharvest treatments that maintain fruit skin colour are increasingly important. Alternatives to SO2 fumigation for control of pericarp browning and fruit rotting are pre-storage pathogen management, anoxia treatment, and dipping in 2% hydrogen chloride solution for 6-8 min following storage at 0 degrees C. Insect disinfestation has become increasingly important for the expansion of export markets because of quarantine issues associated with some fruit fly species. Thus, effective disinfestation protocols need to be developed. Heat treatment has shown promise as a quarantine technology, but it injures pericarp tissue and results in skin browning. However, heat treatment can be combined with an acid dip treatment that inhibits browning. Therefore, the primary aim of postharvest litchi research remains the achievement of highly coloured fruit which is free of pests and disease. Future research should focus on disease control before harvest, combined acid and heat treatments after harvest and careful temperature management during storage and transport.

Some results on the design of field experiments for comparing unreplicated treatments

In early generation variety trials, large numbers of new breeders' lines need to be compared, and usually there is little seed available for each new line. A so-called unreplicated trial has each new line on just one plot at a site, but includes several (often around five) replicated check or control (or standard) varieties. The total proportion of check plots is usually between 10% and 20%. The aim of the trial is to choose some good performing lines (usually around 1/3 of those tested) to go on for further testing, rather than precise estimation of their mean yield. Now that spatial analyses of data from field experiments are becoming more common, there is interest in an efficient layout of an experiment given a proposed spatial analysis. Some possible design criteria are discussed, and efficient layouts under spatial dependence are considered.

Efficient experimental designs when most treatments are unreplicated

In early generation variety trials, large numbers of new breeders' lines (varieties) may be compared, with each having little seed available. A so-called unreplicated trial has each new variety on just one plot at a site, but includes several replicated control varieties, making up around 10% and 20% of the trial. The aim of the trial is to choose some (usually around one third) good performing new varieties to go on for further testing, rather than precise estimation of their mean yields. Now that spatial analyses of data from field experiments are becoming more common, there is interest in an efficient layout of an experiment given a proposed spatial analysis and an efficiency criterion. Common optimal design criteria values depend on the usual C-matrix, which is very large, and hence it is time consuming to calculate its inverse. Since most varieties are unreplicated, the variety incidence matrix has a simple form, and some matrix manipulations can dramatically reduce the computation needed. However, there are many designs to compare, and numerical optimisation lacks insight into good design features. Some possible design criteria are discussed, and approximations to their values considered. These allow the features of efficient layouts under spatial dependence to be given and compared. (c) 2006 Elsevier Inc. All rights reserved.

Vase treatments containing gibberellic acid do not increase longevity of cut Grevillea 'Sylvia' inflorescences

The longevity of Grevillea 'Sylvia' inflorescences can be very short and is influenced by exposure to ethylene. Gibberellic acid has the potential to delay senescence in some cut flowers by acting as an anti-ethylene treatment. Gibberellic acid was therefore applied to Grevillea 'Sylvia' inflorescences in vase solutions to determine its effects on longevity. Treatments with gibberellic acid did not prolong the longevity of inflorescences or influence 1-aminocyclopropane-1-carboxylic acid concentrations. Treatments at high gibberellic acid concentrations enhanced flower abscission and we therefore conclude that vase-applied gibberellic acid treatments are not suitable for extending the longevity of cut Grevillea 'Sylvia' inflorescences.

Effect of physical, chemical and light treatments on germination and growth of tissue-cultured coconuts

The acclimatization and ex vitro establishment of tissue cultured coconut plantlets regenerated either from zygotic or somatic embryos could result to serious losses. Although high germination rates can be achieved in vitro, the survival of zygotic embryo derived plantlets in soil is very low (0-30%). Hence, treatments that could promote development of good quality seedlings having well-developed shoot and root is needed to increase seedling survival ex vitro. The effect of physical, chemical and light quality treatments on germination and growth of coconut embryos and tissue-cultured seedlings respectively, was investigated. The germination of coconut embryos was promoted when placed in a liquid Euwens (Y3) medium and incubated using a roller drum. Gibberellic acid (GA3) significantly affected growth of seedlings as it promoted shoot elongation, shoot and root expansion, and fresh and dry weight increase. However, GA3 did not significantly affect germination. In addition, the blue, red and yellow light significantly affected growth of seedlings as it promoted leaf and shoot elongation, fresh and dry weight increase, and root and leaf production. These conditions could be used to improve the growth and survival ex vitro of tissue cultured coconuts.