How to unravel and solve soil fertility problems

This book provides a way for farmers in developing countries to benefit from scientific knowledge on plant nutrition and soil fertility. Specifically, it will help farmers recognise and deal with shortages or excesses of chemical elements.

Finite element analysis of steady-state natural convection problems in fluid-saturated porous media heated from below

In this paper, a progressive asymptotic approach procedure is presented for solving the steady-state Horton-Rogers-Lapwood problem in a fluid-saturated porous medium. The Horton-Rogers-Lapwood problem possesses a bifurcation and, therefore, makes the direct use of conventional finite element methods difficult. Even if the Rayleigh number is high enough to drive the occurrence of natural convection in a fluid-saturated porous medium, the conventional methods will often produce a trivial non-convective solution. This difficulty can be overcome using the progressive asymptotic approach procedure associated with the finite element method. The method considers a series of modified Horton-Rogers-Lapwood problems in which gravity is assumed to tilt a small angle away from vertical. The main idea behind the progressive asymptotic approach procedure is that through solving a sequence of such modified problems with decreasing tilt, an accurate non-zero velocity solution to the Horton-Rogers-Lapwood problem can be obtained. This solution provides a very good initial prediction for the solution to the original Horton-Rogers-Lapwood problem so that the non-zero velocity solution can be successfully obtained when the tilted angle is set to zero. Comparison of numerical solutions with analytical ones to a benchmark problem of any rectangular geometry has demonstrated the usefulness of the present progressive asymptotic approach procedure. Finally, the procedure has been used to investigate the effect of basin shapes on natural convection of pore-fluid in a porous medium. (C) 1997 by John Wiley & Sons, Ltd.

Two dimensional computational fluid dynamic models for waste stabilisation ponds

Traditional waste stabilisation pond (WSP) models encounter problems predicting pond performance because they cannot account for the influence of pond features, such as inlet structure or pond geometry, on fluid hydrodynamics. In this study, two dimensional (2-D) computational fluid dynamics (CFD) models were compared to experimental residence time distributions (RTD) from literature. In one of the-three geometries simulated, the 2-D CFD model successfully predicted the experimental RTD. However, flow patterns in the other two geometries were not well described due to the difficulty of representing the three dimensional (3-D) experimental inlet in the 2-D CFD model, and the sensitivity of the model results to the assumptions used to characterise the inlet. Neither a velocity similarity nor geometric similarity approach to inlet representation in 2-D gave results correlating with experimental data. However. it was shown that 2-D CFD models were not affected by changes in values of model parameters which are difficult to predict, particularly the turbulent inlet conditions. This work suggests that 2-D CFD models cannot be used a priori to give an adequate description of the hydrodynamic patterns in WSP. (C) 1998 Elsevier Science Ltd. All rights reserved.

What is a healthy weight for middle aged women?

OBJECTIVE: To explore associations between body mass index (BMI) and selected indicators of health and well-being and to suggest a healthy weight range (based on BMI) for middle aged Australian women. DESIGN: population based longitudinal study (cross-sectional baseline data). SUBJECTS: 13431 women aged 45-49 y who participated in the baseline survey for the Australian Longitudinal Study on Women's Health. RESULTS: Forty-eight percent of women had a BMI>25kg/m(2). Prevalence of medical problems (for example, hypertension, diabetes), surgical procedures (cholescystectomy, hysterectomy) and symptoms (for example, back pain) increased monotonically with BMI, while indicators of health care use (for example, visits to doctors) showed a 'J' shaped relationship with BMI. Scores for several sub-scales of the MOS short form health survey (SF36) (for example, general health, role limitations due to emotional difficulties, social function, mental health and vitality) were optimal when BMI was around 19-24 kg/m(2). After adjustment for area of residence, education, smoking, exercise and menopausal status, low BMI was associated with fewer physical health problems than mid-level or higher BMI, and the nationally recommended BMI range of 20-25 was associated with optimum mental health, lower prevalence of tiredness and lowest use of health services. CONCLUSIONS: Acknowledging the limitations of the cross-sectional nature of these data, the results firmly support the benefits of leanness in terms of reducing the risk of cardiovascular disease, diabetes and gall bladder disease. The findings are moderated, however, by the observation that both low and high BMI are associated with decreased vitality and poorer mental health. The optimal range for BMI appears to be about 19-24 kg/m(2). From a public health perspective this study provides strong support for the recommended BMI range of 20-25 as an appropriate target for the promotion of healthy weight in middle aged Australian women.

A simple design methodology for elliptical cross-section, transverse, asymmetric, head gradient coils for MRI

A simple design process for the design of elliptical cross-section, transverse gradient coils for use in magnetic resonance imaging (MRI) is presented. This process is based on a flexible stochastic optimization method and results in designs of high linearity and efficiency with low switching times. A design study of a shielded, transverse asymmetric elliptical coil set for use in neural imaging is presented and includes the minimization of the torques experienced by the gradient set.

Solution of adsorption problems involving steep moving profiles

The moving finite element collocation method proposed by Kill et al. (1995) Chem. Engng Sci. 51 (4), 2793-2799 for solution of problems with steep gradients is further developed to solve transient problems arising in the field of adsorption. The technique is applied to a model of adsorption in solids with bidisperse pore structures. Numerical solutions were found to match the analytical solution when it exists (i.e. when the adsorption isotherm is linear). The method is simple yet sufficiently accurate for use in adsorption problems, where global collocation methods fail. (C) 1998 Elsevier Science Ltd. All rights reserved.

A state-contingent production approach to principal-agent problems with an application to point-source pollution control

Two basic representations of principal-agent relationships, the 'state-space' and 'parameterized distribution' formulations, have emerged. Although the state-space formulation appears more natural, analytical studies using this formulation have had limited success. This paper develops a state-space formulation of the moral-hazard problem using a general representation of production under uncertainty. A closed-form solution for the agency-cost problem is derived. Comparative-static results are deduced. Next we solve the principal's problem of selecting the optimal output given the agency-cost function. The analysis is applied to the problem of point-source pollution control. (C) 1998 Published by Elsevier Science S.A. All rights reserved.

STD syndrome packets: Improving syndromic management of sexually transmitted diseases in developing countries

Objective: To design, introduce, and evaluate STD syndrome packets containing recommended drugs for each syndrome, four condoms, a partner treatment card, and a patient information leaflet, with the goal of improving sexually transmitted disease (STD) case management. Methods: Packet design evolved around available packaging technology, informed by pilot testing with nurses working in primary care clinics, doctors in private medical practices, and patients with an STD, in Hlabisa, South Africa. Evaluation 1 year later included analysis of distribution records and interviews with 16 nurses and 61 patients. Results: A cheap packet (2 U, S, cents each, excluding contents) compatible with current legislation was designed and introduced to six public sector clinics and as a short pilot to five private medical practices, Four thousand eighty-five packets were distributed to the clinics, equivalent to approximately 115% of the STDs reported over that period. All 16 nurses reported using the packets, but only 63% did so all the time because of occasional supply problems, All believed the packets improved treatment by saving time (75%), improving supply of condoms and partner cards (44%), and making treatment easier (56%), Patients also responded positively, and most said they would buy a packet (up to $5) at a pharmacy (84%) or store (63%) if available. Conclusions: The STD syndrome packets have the potential to improve STD syndromic management by standardizing therapy and improving the supply of condoms, partner cards, and information leaflets. Packets are popular with practitioners and patients, but consistent supply is essential for maximal impact, There may be scope for social marketing of the packets, which could further increase use.

Injuries and noncommunicable diseases: emerging health problems of children in developing countries

The present article identifies, for children living in developing countries, the major causes of ill-health that are inadequately covered by established health programmes. Injuries and noncommunicable diseases, notably asthma, epilepsy, dental caries, diabetes mellitus and rheumatic heart disease, are growing in significance. In countries where resources are scarce it is to be expected that increasing importance will be attached to the development and implementation of measures against these problems. Their control may benefit from the application of elements of programmes directed against infectious, nutritional and perinatal disorders, which continue to predominate.

Finite element modelling of reactive mass transport problems in fluid-saturated porous media

We use the finite element method to solve reactive mass transport problems in fluid-saturated porous media. In particular, we discuss the mathematical expression of the chemical reaction terms involved in the mass transport equations for an isothermal, non-equilibrium chemical reaction. It has turned out that the Arrhenius law in chemistry is a good mathematical expression for such non-equilibrium chemical reactions especially from the computational point of view. Using the finite element method and the Arrhenius law, we investigate the distributions of PH (i.e. the concentration of H+) and the relevant reactive species in a groundwater system. Although the main focus of this study is on the contaminant transport problems in groundwater systems, the related numerical techniques and principles are equally applicable to the orebody formation problems in the geosciences. Copyright (C) 1999 John Wiley & Sons, Ltd.

Applications of NMR in drug design: Sructure-activity relationships in disulfide-rich peptides

NMR is a powerful technique for determining structures of biologically active molecules in solution. In recent years. our laboratory has focussed on the structure determination of small disulfide-rich proteins from both plants and animals which are valuable targets in drug design applications. This article will review these structural studies and their implications in drug design.