Corrosion behaviour of a pressure die cast magnesium alloy

High pressure die casting is the most important production method for casting magnesium alloy components, and uniformity of appearance is an important criterion for acceptance of a component by customers. This paper investigates the influence of uniformity in surface appearance of diecast AZ91D plates on their corrosion behaviour. Through immersion, hydrogen collection and weight loss measurements it was found that corrosion is more likely to occur on the areas of the plate that appear to be darker, leading to a non-uniformly corroded surface. Microstructural analysis showed that the non-uniformity in appearance is related to a difference in the morphology and distribution of porosity across the surface of a diecast AZ91D plate. The darker areas of the surface are high in porosity which breaks the continuity of the beta-phase network and provides shortcut paths for corrosion from the surface to the interior of the casting. The brighter shiny areas of the surface are much less porous, with isolated pores being confined by corrosion resistant beta-precipitates thus reducing the corrosion rate.

Smoking and elevated blood pressure are the most important risk factors for subarachnoid hemorrhage in the Asia-Pacific region - An overview of 26 cohorts involving 306,620 participants

Background and Purpose - The cause of subarachnoid hemorrhage ( SAH) is poorly understood and there are few large cohort studies of risk factors for SAH. We investigated the risk of SAH mortality and morbidity associated with common cardiovascular risk factors in the Asia-Pacific region and examined whether the strengths of these associations were different in Asian and Australasian ( predominantly white) populations. Methods - Cohort studies were identified from Internet electronic databases, searches of proceedings of meetings, and personal communication. Hazard ratios (HRs) for systolic blood pressure (SBP), current smoking, total serum cholesterol, body mass index (BMI), and alcohol drinking were calculated from Cox models that were stratified by sex and cohort and adjusted for age at risk. Results - Individual participant data from 26 prospective cohort studies ( total number of participants 306 620) that reported incident cases of SAH ( fatal and/or nonfatal) were available for analysis. During the median follow-up period of 8.2 years, a total of 236 incident cases of SAH were observed. Current smoking (HR, 2.4; 95% CI, 1.8 to 3.4) and SBP > 140 mm Hg ( HR, 2.0; 95% CI, 1.5 to 2.7) were significant and independent risk factors for SAH. Attributable risks of SAH associated with current smoking and elevated SBP ( similar to 140 mm Hg) were 29% and 19%, respectively. There were no significant associations between the risk of SAH and cholesterol, BMI, or drinking alcohol. The strength of the associations of the common cardiovascular risk factors with the risk of SAH did not differ much between Asian and Australasian regions. Conclusions - Cigarette smoking and SBP are the most important risk factors for SAH in the Asia-Pacific region.

Cadmium-induced nephropathy in the development of high blood pressure

In recognition of a central role of the kidney in long-term blood pressure control, we undertook an in-depth analysis of the relationship between blood pressure and kidney damage caused by environmental exposure to the common pollutants cadmium and lead. The subjects were 200 healthy Thais, 16 and 60 years of age (100 female non-smokers, 53 male non-smokers, and 47 male smokers). None of these subjects had been exposed to Cd or Pb in the workplace and their urinary Cd concentrations ranged from 0.4 to 37 nM, whereas their urinary Pb concentrations ranged from 0.1 to 30 nM. The prevalence of high blood pressure was 2%, 8% and 19%, respectively in subjects with low, average and high Cd-burden (linear trend chi(2) = 6.4, P = 0.01). Multiple regression analysis revealed a significant positive association between Cd-burden and blood pressure in male nonsmokers (adjusted beta = 0.31, P = 0.02) and an inverse association between blood pressure and urinary Pb excretion rate in male smokers (adjusted beta = -0.38, P = 0.005). Associations between Cd-burden and nephropathies were evidenced by increases in urinary excretion of beta 2-microglobutin (P = 0.02) and N-acetyl-beta-D-glucosaminidase (P = 0.005) in subjects with high Cd-burden, compared with the subjects with average Cd-burden. In addition, an association between Cd-related nephropathy and high blood pressure was evidenced by a 20% increase in the prevalence of high blood pressure in people with NAG-uria (linear trend chi(2) = 4.3, P = 0.04). Our present study provides first evidence for a possible link between renal tubular damage and dysfunction caused by environmental Cd exposure and increased risk of high blood pressure. (c) 2005 Elsevier Ireland Ltd. All rights reserved.

Assessing longwall support-roof interaction from shield leg pressure data

A concept has been developed where characteristic load cycles of longwall shields can describe most of the interaction between a longwall support and the roof. A characteristic load cycle is the change in support pressure with time from setting the support against the roof to the next release and movement of the support. The concept has been validated through the back-analysis of more than 500 000 individual load cycles in five longwall panels at four mines and seven geotechnical domains. The validation process depended upon the development of new software capable of both handling the large quantity of data emanating from a modern longwall and accurately delineating load cycles. Existing software was found not to be capable of delineating load cycles to a sufficient accuracy. Load-cycle analysis can now be used quantitatively to assess the adequacy of support capacity and the appropriateness of set pressure for the conditions under which a longwall is being operated. When linked to a description of geotechnical conditions, this has allowed the development of a database for support selection for greenfield sites. For existing sites, the load-cycle characteristic concept allows for a diagnosis of strata-support problem areas, enabling changes to be made to set pressure and mining strategies to manage better, or avoid, strata control problems. With further development of the software, there is the prospect of developing a system that is able to respond to changes in strata-support interaction in real time.

Articulatory function following traumatic brain injury in childhood: A perceptual and instrumental analysis

Primary objective: To investigate the articulatory function of a group of children with traumatic brain injury (TBI), using both perceptual and instrumental techniques. Research design: The performance of 24 children with TBI was assessed on a battery of perceptual (Frenchay Dysarthria Assessment, Assessment of Intelligibility of Dysarthric Speech and speech sample analysis) and instrumental ( lip and tongue pressure transduction systems) assessments and compared with that of 24 non-neurologically impaired children matched for age and sex. Main outcomes: Perceptual assessment identified consonant and vowel imprecision, increased length of phonemes and overall reduction in speech intelligibility, while instrumental assessment revealed significant impairment in lip and tongue function in the TBI group, with rate and pressure in repetitive lip and tongue tasks particularly impaired. Significant negative correlations were identified between the degree of deviance of perceptual articulatory features and decreased function on many non-speech measures of lip function, as well as maximum tongue pressure and fine force tongue control at 20% of maximum tongue pressure. Additionally, sub-clinical articulatory deficits were identified in the children with TBI who were non-dysarthric. Conclusion: The results of the instrumental assessment of lip and tongue function support the finding of substantial articulatory dysfunction in this group of children following TBI. Hence, remediation of articulatory function should be a therapeutic priority in these children.

Cost-effectiveness analysis of a kidney and cardiovascular disease treatment program in an Australian aboriginal population

The objective of the study was to assess, from a health service perspective, whether a systematic program to modify kidney and cardiovascular disease reduced the costs of treating end-stage kidney failure. The participants in the study were 1,800 aboriginal adults with hypertension, diabetes with microalbuminuria or overt albuminuria, and overt albuminuria, living on two islands in the Northern Territory of Australia during 1995 to 2000. Perindopril was the primary treatment agent, and other medications were also used to control blood pressure. Control of glucose and lipid levels were attempted, and health education was offered. Evaluation of program resource use and costs for follow-up periods was done at 3 and 4.7 years. On an intention-to-treat basis, the number of dialysis starts and dialysis-years avoided were estimated by comparing the fate of the treatment group with that of historical control subjects, matched for disease severity, who were followed in the before the treatment program began. For the first three years, an estimated 11.6 person-years of dialysis were avoided, and over 4.7 years, 27.7 person-years of dialysis were avoided. The net cost of the program was $1,210 more per person per year than status quo care, and dialyses avoided gave net savings of $1.0 million at 3 years and $3.4 million at 4.6 years. The treatment program provided significant health benefit and impressive cost savings in dialysis avoided. (C) 2005 by the National Kidney Foundation, Inc.

Coupled thermal, structural and vibrational analysis of a hypersonic engine for flight test

This paper describes a relatively simple and quick method for implementing aerodynamic heating models into a finite element code for non-linear transient thermal-structural and thermal-structural-vibrational analyses of a Mach 10 generic HyShot scramjet engine. The thermal-structural-vibrational response of the engine was studied for the descent trajectory from 60 to 26 km. Aerodynamic heating fluxes, as a function of spatial position and time for varying trajectory points, were implemented in the transient heat analysis. Additionally, the combined effect of varying dynamic pressure and thermal loads with altitude was considered. This aero-thermal-structural analysis capability was used to assess the temperature distribution, engine geometry distortion and yielding of the structural material due to aerodynamic heating during the descent trajectory, and for optimising the wall thickness, nose radius of leading edge, etc. of the engine intake. A structural vibration analysis was also performed following the aero-thermal-structural analysis to determine the changes in natural frequencies of the structural vibration modes that occur at the various temperatures associated with the descent trajectory. This analysis provides a unique and relatively simple design strategy for predicting and mitigating the thermal-structural-vibrational response of hypersonic engines. (C) 2006 Elsevier SAS. All rights reserved.

Validation of a generalized transfer function to noninvasively derive central blood pressure during exercise

Exercise brachial blood pressure ( BP) predicts mortality, but because of wave reflection, central ( ascending aortic) pressure differs from brachial pressure. Exercise central BP may be clinically important, and a noninvasive means to derive it would be useful. The purpose of this study was to test the validity of a noninvasive technique to derive exercise central BP. Ascending aortic pressure waveforms were recorded using a micromanometer-tipped 6F Millar catheter in 30 patients (56 +/- 9 years; 21 men) undergoing diagnostic coronary angiography. Simultaneous recordings of the derived central pressure waveform were acquired using servocontrolled radial tonometry at rest and during supine cycling. Pulse wave analysis of the direct and derived pressure signals was performed offline (SphygmoCor 7.01). From rest to exercise, mean arterial pressure and heart rate were increased by 20 +/- 10 mm Hg and 15 +/- 7 bpm, respectively, and central systolic BP ranged from 77 to 229 mm Hg. There was good agreement and high correlation between invasive and noninvasive techniques with a mean difference (+/- SD) for central systolic BP of -1.3 +/- 3.2 mm Hg at rest and -4.7 +/- 3.3 mm Hg at peak exercise ( for both r=0.995; P < 0.001). Conversely, systolic BP was significantly higher peripherally than centrally at rest (155 +/- 33 versus 138 +/- 32mm Hg; mean difference, -16.3 +/- 9.4mm Hg) and during exercise (180 +/- 34 versus 164 +/- 33 mm Hg; mean difference, -15.5 +/- 10.4 mm Hg; for both P < 0.001). True myocardial afterload is not reliably estimated by peripheral systolic BP. Radial tonometry and pulse wave analysis is an accurate technique for the noninvasive determination of central BP at rest and during exercise.

Numerical analysis of gas and micro-particle interactions in a hand-held shock-tube device

A unique hand-held gene gun is employed for ballistically delivering biomolecules to key cells in the skin and mucosa in the treatment of the major diseases. One of these types of devices, called the Contoured Shock Tube (CST), delivers powdered micro-particles to the skin with a narrow and highly controllable velocity distribution and a nominally uniform spatial distribution. In this paper, we apply a numerical approach to gain new insights in to the behavior of the CST prototype device. The drag correlations proposed by Henderson (1976), Igra and Takayama (1993) and Kurian and Das (1997) were applied to predict the micro-particle transport in a numerically simulated gas flow. Simulated pressure histories agree well with the corresponding static and Pitot pressure measurements, validating the CFD approach. The calculated velocity distributions show a good agreement, with the best prediction from Igra & Takayama correlation (maximum discrepancy of 5%). Key features of the gas dynamics and gas-particle interaction are discussed. Statistic analyses show a tight free-jet particle velocity distribution is achieved (570 +/- 14.7 m/s) for polystyrene particles (39 +/- 1 mu m), representative of a drug payload.

A mathematical modelling technique for the analysis of the dynamics of a simple continuous EDA

This paper presents some initial attempts to mathematically model the dynamics of a continuous estimation of distribution algorithm (EDA) based on a Gaussian distribution and truncation selection. Case studies are conducted on both unimodal and multimodal problems to highlight the effectiveness of the proposed technique and explore some important properties of the EDA. With some general assumptions, we show that, for ID unimodal problems and with the (mu, lambda) scheme: (1). The behaviour of the EDA is dependent only on the general shape of the test function, rather than its specific form; (2). When initialized far from the global optimum, the EDA has a tendency to converge prematurely; (3). Given a certain selection pressure, there is a unique value for the proposed amplification parameter that could help the EDA achieve desirable performance; for ID multimodal problems: (1). The EDA could get stuck with the (mu, lambda) scheme; (2). The EDA will never get stuck with the (mu, lambda) scheme.