Social inclusion, new regionalism and associational governance: The Queensland experience

In recent years there has been a resurgence of decentralized social governance concerned with the spatial dimensions of disadvantage. This article examines aspects of this resurgence in the Australian state of Queensland where, after the hasty birth of 'place management' in response to the rise of 'Hansonism', a plethora of 'joined-up' policy initiatives were undertaken in relation to the regional dimensions of poverty. We propose that these trends reflect in part new ways of thinking about the spatial aspects of disadvantage which have emerged in recent years and which have the potential to take regional policy beyond the narrow confines imposed by neoliberal economic orthodoxy. These new ways of thinking have arisen in social policy through the refraining of disadvantage in terms of social exclusion and in regional economic policy through the influence of the so-called 'new regionalism'. The article shows how together these bodies of theory point us towards a new model of 'associational governance'. The article reviews recent Queensland experience and indicates those features of 'associational governance' which have become characteristic of locality-based social policy ideas in Queensland. 'Joined-up' and regional policy aspirations of the Queensland State government have shown the influence of these new approaches. The political and policy sustainability of these trends, however, is uncertain. The lingering shadow of managerialism and neoliberal policy frameworks remains a significant barrier to the innovation and viability of these approaches. More directly, the inherent limits of the 'local' or 'regional' initiatives in the face of broader national and global factors will significantly constrain the capacity of associational governance systems to deliver positive democratic, social and economic outcomes. The article examines recent Queensland policy refors in light of this complex set of factors and concludes by offering directions for future research and policy development.

How do practitioners use conceptual modeling in practice?

Much research has been devoted over the years to investigating and advancing the techniques and tools used by analysts when they model. As opposed to what academics, software providers and their resellers promote as should be happening, the aim of this research was to determine whether practitioners still embraced conceptual modeling seriously. In addition, what are the most popular techniques and tools used for conceptual modeling? What are the major purposes for which conceptual modeling is used? The study found that the top six most frequently used modeling techniques and methods were ER diagramming, data flow diagramming, systems flowcharting, workflow modeling, UML, and structured charts. Modeling technique use was found to decrease significantly from smaller to medium-sized organizations, but then to increase significantly in larger organizations (proxying for large, complex projects). Technique use was also found to significantly follow an inverted U-shaped curve, contrary to some prior explanations. Additionally, an important contribution of this study was the identification of the factors that uniquely influence the decision of analysts to continue to use modeling, viz., communication (using diagrams) to/from stakeholders, internal knowledge (lack of) of techniques, user expectations management, understanding models' integration into the business, and tool/software deficiencies. The highest ranked purposes for which modeling was undertaken were database design and management, business process documentation, business process improvement, and software development. (c) 2005 Elsevier B.V. All rights reserved.

Unified derivations of measurement-based schemes for quantum computation

We present unified, systematic derivations of schemes in the two known measurement-based models of quantum computation. The first model (introduced by Raussendorf and Briegel, [Phys. Rev. Lett. 86, 5188 (2001)]) uses a fixed entangled state, adaptive measurements on single qubits, and feedforward of the measurement results. The second model (proposed by Nielsen, [Phys. Lett. A 308, 96 (2003)] and further simplified by Leung, [Int. J. Quant. Inf. 2, 33 (2004)]) uses adaptive two-qubit measurements that can be applied to arbitrary pairs of qubits, and feedforward of the measurement results. The underlying principle of our derivations is a variant of teleportation introduced by Zhou, Leung, and Chuang, [Phys. Rev. A 62, 052316 (2000)]. Our derivations unify these two measurement-based models of quantum computation and provide significantly simpler schemes.

Destination image, romance and place experience - an application of intimacy theory in tourism

In some forms of tourism, and perhaps particularly in the case of special interest tourism, it can be argued that tourism encounters are service relationships with emotional attachment through the special interest focus and a level of enduring involvement on the part of participants. This involvement is two-fold. First, an interest with the activity; second, a sharing with like-minded people in a social world that extends from home to tourist destination and return. Intimacies in tourism can thus be interpreted through the model of the relationship cycle that comprises the stages A. Aquaintance, B, Buildup, C, Continuation and D, Dissolution. The paper builds upon this concept by utilising ideas of other-centred and self-centredness in personal relationships, and extends the concept of other-centredness to host environments. It also suggests that, in the academic literature about place, location may be secondary in that the quality of experience is primarily determined by the intimacies that exist between people at that place, especially that existing between visitors. © 2004 Published by Elsevier Ltd.

Fixing the system? The experience of service users of the quasi-market in disability services in Australia

A qualitative study involving semi-structured interviews with 31 people with disabilities and 32 carers in the state of Queensland, Australia, found that their experience of supportive service delivery had not improved despite reforms of the service delivery system driven by a version of the quasi-market model. Instead of delivering increased consumer choice and improved efficiency in service delivery, service users experienced inadequate service supply, service cutbacks, and an increased emphasis on cost subsidisation and assessment processes. Additionally, few consumers felt that individualised funding arrangements had personally delivered the benefits which the quasi-market model and associated policy paradigm had indicated that they should receive. For many consumers, the notion of consumer 'choice' around service provision was fictitious and they felt that any efficiency gains were at the agency level, largely at the consumers' cost. It is concluded that there appears to be no particular benefit to service users of quasi-market reforms, particularly in policy contexts where service delivery systems are historically under-funded.

A Mixture model with random-effects components for clustering correlated gene-expression profiles

Motivation: The clustering of gene profiles across some experimental conditions of interest contributes significantly to the elucidation of unknown gene function, the validation of gene discoveries and the interpretation of biological processes. However, this clustering problem is not straightforward as the profiles of the genes are not all independently distributed and the expression levels may have been obtained from an experimental design involving replicated arrays. Ignoring the dependence between the gene profiles and the structure of the replicated data can result in important sources of variability in the experiments being overlooked in the analysis, with the consequent possibility of misleading inferences being made. We propose a random-effects model that provides a unified approach to the clustering of genes with correlated expression levels measured in a wide variety of experimental situations. Our model is an extension of the normal mixture model to account for the correlations between the gene profiles and to enable covariate information to be incorporated into the clustering process. Hence the model is applicable to longitudinal studies with or without replication, for example, time-course experiments by using time as a covariate, and to cross-sectional experiments by using categorical covariates to represent the different experimental classes. Results: We show that our random-effects model can be fitted by maximum likelihood via the EM algorithm for which the E(expectation) and M(maximization) steps can be implemented in closed form. Hence our model can be fitted deterministically without the need for time-consuming Monte Carlo approximations. The effectiveness of our model-based procedure for the clustering of correlated gene profiles is demonstrated on three real datasets, representing typical microarray experimental designs, covering time-course, repeated-measurement and cross-sectional data. In these examples, relevant clusters of the genes are obtained, which are supported by existing gene-function annotation. A synthetic dataset is considered too.

Applicability of experience from laboratory reactors with biological phosphorus removal in full-scale plants

Enhanced biological phosphorus removal (EBPR) has been used at many wastewater treatment plants all over the world for many years. In this study a full-scale sludge with good EBPR was tested with P-release batch tests and combined FISH/MAR (fluorescence in situ hybridisation and microautoradiography). Proposed models of PAOs and GAOs (polyphosphate- and glycogen-accumulating organisms) and microbial methods suggested from studies of laboratory reactors were found to be applicable also on sludge from full-scale plants. Dependency of pH and the uptake of both acetate and propionate were studied and used for calculations for verifying the models and results from microbial methods. All rates found from the batch tests with acetate were higher than in the batch tests with propionate, which was explained by the finding that only those parts of the bacterial community that were able to take up acetate anaerobically were able to take up propionate anaerobically.

Pig eye trabeculectomy - a wet-lab teaching model

Purpose A teaching model for trabeculectomy is described using pig eyes prepared in formalin. Method The model enables trainee surgeons to practice various aspects of tissue handling required for successful trabeculectomy including the construction of a fornix-based conjunctival flap, scleral flap with buried releasable sutures, and water-tight conjunctival closure. Results Exposure to the necessary skills required to perform trabeculectomy surgery can be improved by the use of wet laboratory practice. Conclusions Trabeculectomy surgery experience is becoming more limited as fewer procedures are being performed due to the efficacy of recent medications. Wet laboratories will become an increasingly important aspect of a comprehensive ophthalmology training programme.

Spelling in adults: The combined influences of language skills and reading experience

One hundred and twelve university students completed 7 tests assessing word-reading accuracy, print exposure, phonological sensitivity, phonological coding and knowledge of English morphology as predictors of spelling accuracy. Together the tests accounted for 71% of the variance in spelling, with phonological skills and morphological knowledge emerging as strong predictors of spelling accuracy for words with both regular and irregular sound-spelling correspondences. The pattern of relationships was consistent with a model in which, as a function of the learning opportunities that are provided by reading experience, phonological skills promote the learning of individual word orthographies and structural relationships among words.

A unified friction description and its application to the simulation of frictional instability using the finite element method

This article first summarizes some available experimental results on the frictional behaviour of contact interfaces, and briefly recalls typical frictional experiments and relationships, which are applicable for rock mechanics, and then a unified description is obtained to describe the entire frictional behaviour. It is formulated based on the experimental results and applied with a stick and slip decomposition algorithm to describe the stick-slip instability phenomena, which can describe the effects observed in rock experiments without using the so-called state variable, thus avoiding related numerical difficulties. This has been implemented to our finite element code, which uses the node-to-point contact element strategy proposed by the authors to handle the frictional contact between multiple finite-deformation bodies with stick and finite frictional slip, and applied here to simulate the frictional behaviour of rocks to show its usefulness and efficiency.

Peanut farmers experience with FARMSCAPE in peninsular India

Researchers and extension officers collaborated with farmers in addressing peanut cropping and sowing decisions using on-farm experiments and cropping systems simulation in the Pollachi region of Tamil Nadu, India. The most influential variable affecting the peanut productivity in this irrigated region regard sowing date. During the 1998-1999 rabi (post rainy) season, three farmers fields in villages in Pollachi region were selected and monitored. The APSIM model was used to simulate the effect of sowing date. The APSIM-Peanut module simulation demonstrated close correspondence with the field observation in predicting yield. The model predicted that December sowing resulted in higher yield than January sowing due to longer pod filling period, and this was confirmed by farmer experience. The farmers and extension officers became comfortable with their role as owners of the collaborative experiments and custodians of the learning environment.

Relationships between quality of experience and participation in diverse performance settingshttp://espace.library.uq.edu.au/workflow/edit_metadata.php?id=382160&wfs_id=778

The flow concept describes a model of enjoyment that has relevance for understanding participation and experience across a wide range of activities (Csikszentmihalyi, 1997). The basic premise of the flow concept is that when challenges and skills are simultaneously balanced and extending the individual, a state of total absorption can occur. Research by Jackson and colleagues has examined the utility of the flow concept to understanding participation and performance in sport settings. Recently, Jackson and Eklund have examined flow in a range of performance settings: sport, exercise, dance, creative and performing arts, and music. In this paper, we present descriptive and construct validity data on how participants in these activities experienced flow, as assessed by the recently revised flow scales: The Dispositional Flow Scale-2 (DFS-2) and Flow State Scale-2 (FSS-2) (Jackson & Eklund, 2002). The fmdings will be discussed in relation to the utility of the flow concept to understanding participation across performance settings.

Towards user profiling for web recommendation

Collaborative recommendation is one of widely used recommendation systems, which recommend items to visitor on a basis of referring other's preference that is similar to current user. User profiling technique upon Web transaction data is able to capture such informative knowledge of user task or interest. With the discovered usage pattern information, it is likely to recommend Web users more preferred content or customize the Web presentation to visitors via collaborative recommendation. In addition, it is helpful to identify the underlying relationships among Web users, items as well as latent tasks during Web mining period. In this paper, we propose a Web recommendation framework based on user profiling technique. In this approach, we employ Probabilistic Latent Semantic Analysis (PLSA) to model the co-occurrence activities and develop a modified k-means clustering algorithm to build user profiles as the representatives of usage patterns. Moreover, the hidden task model is derived by characterizing the meaningful latent factor space. With the discovered user profiles, we then choose the most matched profile, which possesses the closely similar preference to current user and make collaborative recommendation based on the corresponding page weights appeared in the selected user profile. The preliminary experimental results performed on real world data sets show that the proposed approach is capable of making recommendation accurately and efficiently.

The role of software tools in influencing creative problem solving in engineering design and education

Creativity is increasingly recognised as an essential component of engineering design. This paper describes an exploratory study into the nature and importance of creativity in engineering design problem solving in relation to the possible impact of software design tools. The first stage of the study involved an empirical investigation in the form of a case study of the use of standard CAD tool sets and the development of a systems engineering software support tool. It was found that there were several ways in which CAD influenced the creative process, including enhancing visualisation and communication, premature fixation, circumscribed thinking and bounded ideation. The tool development experience uncovered the difficulty in supporting creative processes from the developer's perspective. The issues were the necessity of making assumptions, achieving a balance between structure and flexibility, and the pitfalls of satisfying user wants and needs. The second part of the study involved the development of a model of the creative problem solving process in engineering design. This provided a possible explanation for why purpose designed engineering software tools might encourage an analytical problem solving approach and discourage a more creative approach.

Verifying metamodel coverage of model transformations

Since the object management group (OMG) commenced its model driven architecture (MDA) initiative, there has been considerable activity proposing and building automatic model transformation systems to help implement the MDA concept. Much less attention has been given to the need to ensure that model transformations generate the intended results. This paper explores one aspect of validation and verification for MDA: coverage of the source and/or target metamodels by a set of model transformations. The paper defines the property of metamodel coverage and some corresponding algorithms. This property helps the user assess which parts of a source (or target) metamodel are referenced by a given model transformation set. Some results are presented from a prototype implementation that is built on the eclipse modeling framework (EMF).