73 resultados para Separation of Control and Observation
Resumo:
Introduction: There is currently a need for research into indicators that could be used by non-clinical professionals working with young people, to inform the need for referral for further clinical assessment of those at risk of suicide. Method: Participants of this repeated measures longitudinal study, were 2603, 2485, and 2246 school students aged 13, 14, and 15, respectively, from 27 South Australian Schools. Results: Perceived academic performance, self-esteem and locus of control are significantly associated with suicidality. Further, logistic regression of longitudinal results suggests that perceived academic performance, over and above self-esteem and locus of control, in some instances, is a good long-term predictor of suicidality. (C) 2004 Published by Elsevier Ltd. on behalf of The Association for Professionals in Services for Adolescents.
Resumo:
Criticism of religiously motivated contributions to public policy debate is largely misconceived. It assumes that the mischief which constitutional separation of church and state is supposed to cure is a domination of the state by the church. This presents only one side of the story. Subservience by the church to the slate should also be avoided. The law of a liberal state is legitimate to the extent that it does not conflict with the basic moral values of its citizens. Therefore, an ongoing conversation about basic values is necessary. Allowing churches and individual believers the freedom to make distinctive 'religious' contributions to this conversation is consistent with the separation of church and state. It is an aspect of the liberal democratic state's obligation to listen to all perspectives on difficult moral issues. A close relationship between church and state, on the other hand, has the capacity to impede the conversation.
Resumo:
Leptin and Y2 receptors on hypothalamic NPY neurons mediate leptin effects on energy homeostasis; however, their interaction in modulating osteoblast activity is not established. Here, direct testing of this possibility indicates distinct mechanisms of action for leptin anti-osteogenic and Y2(-/-) anabolic pathways in modulating bone formation. Introduction: Central enhancement of bone formation by hypothalamic neurons is observed in leptin-deficient oblob and Y2 receptor null mice. Similar elevation in central neuropeptide Y (NPY) expression and effects on osteoblast activity in these two models suggest a shared pathway between leptin and Y2 receptors in the central control of bone physiology. The aim of this study was to test whether the leptin and Y2 receptor pathways regulate bone by the same or distinct mechanisms. Materials and Methods: The interaction of concomitant leptin and Y2 receptor deficiency in controlling bone was examined in Y2(-/-) oblob double mutant mice, to determine whether leptin and Y2 receptor deficiency have additive effects. Interaction between leptin excess and Y2 receptor deletion was examined using recombinant adeno-associated viral vector overproduction of NPY (AAV-NPY) to produce weight gain and thus leptin excess in adult Y2(-/-) mice. Cancellous bone volume and bone cell function were assessed. Results: Osteoblast activity was comparably elevated in oblob, Y2(-/-), and Y2(-/-) oblob mice. However, greater bone resorption in oblob and Y2(-/-) oblob mice reduced cancellous bone volume compared with Y2(-/-). Both wildtype and Y2(-/-) AAV-NPY mice exhibited marked elevation of white adipose tissue accumulation and hence leptin expression, thereby reducing osteoblast activity. Despite this anti-osteogenic leptin effect in the obese AAV-NPY model, osteoblast activity in Y2(-/-) AAV-NPY mice remained significantly greater than in wildtype AAV-NPY mice. Conclusions: This study suggests that NPY is not a key regulator of the leptin-dependent osteoblast activity, because both the leptin-deficient stimulation of bone formation and the excess leptin inhibition of bone formation can occur in the presence of high hypothalamic NPY. The Y2(-/-) pathway acts consistently to stimulate bone formation; in contrast, leptin continues to suppress bone formation as circulating levels increase. As a result, they act increasingly in opposition as obesity becomes more marked. Thus, in the absence of leptin, the cancellous bone response to loss of Y2 receptor and leptin activity can not be distinguished. However, as leptin levels increase to physiological levels, distinct signaling pathways are revealed.
Resumo:
Process optimisation and optimal control of batch and continuous drum granulation processes are studied in this paper. The main focus of the current research has been: (i) construction of optimisation and control relevant, population balance models through the incorporation of moisture content, drum rotation rate and bed depth into the coalescence kernels; (ii) investigation of optimal operational conditions using constrained optimisation techniques; (iii) development of optimal control algorithms based on discretized population balance equations; and (iv) comprehensive simulation studies on optimal control of both batch and continuous granulation processes. The objective of steady state optimisation is to minimise the recycle rate with minimum cost for continuous processes. It has been identified that the drum rotation-rate, bed depth (material charge), and moisture content of solids are practical decision (design) parameters for system optimisation. The objective for the optimal control of batch granulation processes is to maximize the mass of product-sized particles with minimum time and binder consumption. The objective for the optimal control of the continuous process is to drive the process from one steady state to another in a minimum time with minimum binder consumption, which is also known as the state-driving problem. It has been known for some time that the binder spray-rate is the most effective control (manipulative) variable. Although other possible manipulative variables, such as feed flow-rate and additional powder flow-rate have been investigated in the complete research project, only the single input problem with the binder spray rate as the manipulative variable is addressed in the paper to demonstrate the methodology. It can be shown from simulation results that the proposed models are suitable for control and optimisation studies, and the optimisation algorithms connected with either steady state or dynamic models are successful for the determination of optimal operational conditions and dynamic trajectories with good convergence properties. (c) 2005 Elsevier Ltd. All rights reserved.
Resumo:
Objective. To explore the relationship between measures of self-efficacy, health locus of control, health status and direct medical expenditure among community-dwelling subjects with rheumatoid arthritis (RA) and osteoarthritis (OA). Methods. This analysis is part of a larger ongoing study of the costs and outcomes of arthritis and its treatments. Community-dwelling RA and OA respondents completed questionnaires concerning arthritis-related expenditure, health status, arthritis related self-efficacy and health locus of control. Results. Data were obtained from 70 RA respondents and 223 OA respondents. The majority of respondents were female with a mean age of 63 yr for RA respondents and 68 yr for OA respondents. Among the RA respondents, those with higher self-efficacy reported better health status and lower overall costs. Health locus of control was not consistently correlated with health status. OA respondents with higher self-efficacy reported better health status and lower costs. Health locus of control had more influence. OA respondents with higher external locus of control reported worse pain and function. A higher belief in chance as a determinant of health was correlated with more visits to general practitioners and a higher cost to both the respondent and the health system. Conclusion. Higher self-efficacy, which is amenable to change through education programmes, was associated with better health status and lower costs to the respondent and the health system in this cross-sectional study. Locus of control had less of an influence; however, the tendency was for those with higher external locus of control to have higher costs and worse health status. As the measurement of these constructs is simple and the outcome potentially affects health status, these results have implications for future intervention studies to improve quality of life and reduce the financial impact of arthritis on both the health-care system and patients.
Resumo:
Objective: The purpose of this study was to evaluate the efficacy of acupressure at the P6 point for the in-patient treatment of severe nausea and vomiting in early pregnancy. Study design: This was a prospective single-blind randomized control trial that involved 80 patients with nausea and vomiting plus ketonuria before 14 weeks of gestation. Results: There was no difference between length of stay, amount of medication, or fluid required between the acupressure and placebo groups, although acupressure reduced the number of patients who stayed >= 4 nights in the hospital. Acupressure was well tolerated and not associated with an increase in perinatal morbidity or death. Conclusion: The use of acupressure Lit the P6 point does not reduce the amount of antiemetric medication that is required, the requirement for intravenous fluid, and median duration of inpatient stay more than the use of placebo. A small reduction was seen in the number of women who required >= 4 days in the hospital. (c) 2006 Mosby, Inc. All rights reserved.
Resumo:
Thermosetting blends of an aliphatic epoxy resin and a hydroxyl-functionalized hyperbranched polymer (HBP), aliphatic hyperbranched polyester Boltorn H40, were prepared using 4,4'-diaminodiphenylmethane (DDM) as the curing agent. The phase behavior and morphology of the DDM-cured epoxy/HBP blends with HBP content up to 40 wt% were investigated by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM). The cured epoxy/HBP blends are immiscible and exhibit two separate glass transitions, as revealed by DMA. The SEM observation showed that there exist two phases in the cured blends, which is an epoxy-rich phase and an HBP-rich phase, which is responsible for the two separate glass transitions. The phase morphology was observed to be dependent on the blend composition. For the blends with HBP content up to 10 wt%, discrete HBP domains are dispersed in the continuous cured epoxy matrix, whereas the cured blend with 40 wt% HBP exhibits a combined morphology of connected globules and bicominuous phase structure. Porous epoxy thermosets with continuous open structures on the order of 100-300 nm were formed after the HBP-rich phase was extracted with solvent from the cured blend with 40 wt% HBP. The DSC study showed that the curing rate is not obviously affected in the epoxy/HBP blends with HBP content up to 40 wt %. The activation energy values obtained are not remarkably changed in the blends; the addition of HBP to epoxy resin thus does not change the mechanism of cure reaction of epoxy resin with DDM. (c) 2006 Wiley Periodicals, Inc.