Cigarette smoking and risk of epithelial ovarian cancer (Australia)

Objectives: We studied the association between cigarette smoking and ovarian cancer in a population-based case-control study. Methods: A total of 794 women with histologically confirmed epithelial ovarian cancer who were aged 18-79 years and resident in one of three Australian states were interviewed, together with 855 controls aged 18-79 years selected at random from the electoral roll from the same states. Information was obtained about cigarette smoking and other factors including age, parity, oral contraceptive use, and reproductive factors. We estimated the relative risk of ovarian cancer associated with cigarette smoking, accounting for histologic type, using multivariable logistic regression to adjust for confounding factors. Results: Women who had ever smoked cigarettes were more likely to develop ovarian cancer than women who had never smoked (adjusted odds ratio (OR) = 1.5; 95% confidence interval (CI) = 1.2-1.9). Risk was greater for ovarian cancers of borderline malignancy (OR = 2.4; 95% CI = 1.4-4.1) than for invasive tumors (OR = 1.7; 95% CI = 1.2-2.4) and the histologic subtype most strongly associated overall was the mucinous subtype among both current smokers (OR = 3.2; 95% CI = 1.8-5.7) and past smokers (OR = 2.3; 95% CI = 1.3-3.9). Conclusions: These data extend recent findings and suggest that cigarette smoking is a risk factor for ovarian cancer, especially mucinous and borderline mucinous types. From a public health viewpoint, this is one of the few reports of a potentially avoidable risk factor for ovarian cancer.

Three-dimensional orthotropic viscoelastic finite element model of a human ligament

Ligaments undergo finite strain displaying hyperelastic behaviour as the initially tangled fibrils present straighten out, combined with viscoelastic behaviour (strain rate sensitivity). In the present study the anterior cruciate ligament of the human knee joint is modelled in three dimensions to gain an understanding of the stress distribution over the ligament due to motion imposed on the ends, determined from experimental studies. A three dimensional, finite strain material model of ligaments has recently been proposed by Pioletti in Ref. [2]. It is attractive as it separates out elastic stress from that due to the present strain rate and that due to the past history of deformation. However, it treats the ligament as isotropic and incompressible. While the second assumption is reasonable, the first is clearly untrue. In the present study an alternative model of the elastic behaviour due to Bonet and Burton (Ref. [4]) is generalized. Bonet and Burton consider finite strain with constant modulii for the fibres and for the matrix of a transversely isotropic composite. In the present work, the fibre modulus is first made to increase exponentially from zero with an invariant that provides a measure of the stretch in the fibre direction. At 12% strain in the fibre direction, a new reference state is then adopted, after which the material modulus is made constant, as in Bonet and Burton's model. The strain rate dependence can be added, either using Pioletti's isotropic approximation, or by making the effect depend on the strain rate in the fibre direction only. A solid model of a ligament is constructed, based on experimentally measured sections, and the deformation predicted using explicit integration in time. This approach simplifies the coding of the material model, but has a limitation due to the detrimental effect on stability of integration of the substantial damping implied by the nonlinear dependence of stress on strain rate. At present, an artificially high density is being used to provide stability, while the dynamics are being removed from the solution using artificial viscosity. The result is a quasi-static solution incorporating the effect of strain rate. Alternate approaches to material modelling and integration are discussed, that may result in a better model.

Limits to squeezing in the degenerate optical parametric oscillator

We develop a systematic theory of quantum fluctuations in the driven optical parametric oscillator, including the region near threshold. This allows us to treat the limits imposed by nonlinearities to quantum squeezing and noise reduction in this nonequilibrium quantum phase transition. In particular, we compute the squeezing spectrum near threshold and calculate the optimum value. We find that the optimal noise reduction occurs at different driving fields, depending on the ratio of damping rates. The largest spectral noise reductions are predicted to occur with a very high-Q second-harmonic cavity. Our analytic results agree well with stochastic numerical simulations. We also compare the results obtained in the positive-P representation, as a fully quantum-mechanical calculation, with the truncated Wigner phase-space equation, also known as the semiclassical theory.

The damped and coherently-driven Jaynes-Cummings model

We investigate the influence of a single-mode cavity on the Autler-Townes doublet that arises when a three-level atom is strongly driven by a laser field tuned to one of the atomic transitions and probed by a tunable, weak field coupled to the other transition. We assume that the cavity mode is coupled to the driven transition and the cavity and laser frequencies are equal to the atomic transition frequency. We find that the Autler-Townes spectrum can have one, two or three peaks depending on the relative magnitudes of the Rabi frequencies of the cavity and driving fields. We show that, in order to understand the three-peaked spectrum, it is necessary to go beyond the secular approximation, leading to interesting quantum interference effects. We find that the positions and relative intensities of the three spectral components are affected strongly by the atom-cavity coupling strength g and the cavity damping K. For an increasing g and/or decreasing K the triplet evolves into a single peak. This results in 'undressing' of the system such that the atom collapses into its ground state. We interpret the spectral features in terms of the semiclassical dressed-atom model, and also provide complementary views of the cavity effects in terms of quantum Langevin equations and the fully quantized, 'double -dressing' model.

Health and demographic characteristics of respondents in an Australian national sexuality survey: comparison with population norms

Study objective: To assess the representativeness of survey participants by systematically comparing volunteers in a national health and sexuality survey with the Australian population in terms of self reported health status (including the SF-36) and a wide range of demographic characteristics. Design: A cross sectional sample of Australian residents were compared with demographic data from the 1996 Australian census and health data from the 1995 National Health Survey. Setting: The Australian population. Participants: A stratified random sample of adults aged 18-59 years drawn from the Australian electoral roll, a compulsory register of voters. Interviews were completed with 1784 people, representing 40% of those initially selected (58% of those for whom a valid telephone number could be located). Main results: Participants were of similar age and sex to the national population. Consistent with prior research, respondents had higher socioeconomic status, more education, were more likely to be employed, and less likely to be immigrants. The prevalence estimates, means, and variances of self reported mental and physical health measures (for example, SF-36 subscales, women's health indicators, current smoking status) were similar to population norms. Conclusions: These findings considerably strengthen inferences about the representativeness of data on health status from volunteer samples used in health and sexuality surveys.

Discrete element modelling of power draw of tumbling mills

The power required to operate large mills is typically 5-10 MW. Hence, optimisation of power consumption will have a significant impact on overall economic performance and environmental impact. Power draw modelling results using the discrete element code PFC3D have been compared with results derived from the widely used empirical Model of Morrell. This is achieved by calculating the power draw for a range of operating conditions for constant mill size and fill factor using two modelling approaches. fThe discrete element modelling results show that, apart from density, selection of the appropriate material damping ratio is critical for the accuracy of modelling of the mill power draw. The relative insensitivity of the power draw to the material stiffness allows selection of moderate stiffness values, which result in acceptable computation time. The results obtained confirm that modelling of the power draw for a vertical slice of the mill, of thickness 20% of the mill length, is a reliable substitute for modelling the full mill. The power draw predictions from PFC3D show good agreement with those obtained using the empirical model. Due to its inherent flexibility, power draw modelling using PFC3D appears to be a viable and attractive alternative to empirical models where necessary code and computer power are available.

Lactobacillus ruminis is a predominant lactic acid producing bacterium in the caecum and rectum of the pig

Aims: To identify the predominant lactic acid producing bacteria in the small intestine, caecum and the rectum of the healthy pig. Methods and Results: Samples obtained from the large intestine of healthy pigs post-mortem were cultured using a modified agar-MRS medium in roll tubes. Thirteen isolates were selected on the basis of their morphological characteristics and Gram stain reaction for gene sequencing. These isolates were characterized by DNA sequence analysis of 16S rDNA. Eight isolates were identified as Lactobacillus ruminis , two as Enterococcus faecium , one as Mitsuokella multiacidus and two as Escherichia coli . Conclusion: This is the first report of Lact. ruminis as the dominant lactic acid bacteria in the large intestine of the pig. Significance and Impact of the Study: The results suggest that Lact. ruminis is a dominant bacterium in the large intestine of the healthy pig. Future work should focus on the role of this bacterium in relation to the physiological function of the intestine and the health of the animal.

Sexual dysfunction in the Australian population

AIM: To describe the prevalence and forms of sexual dysfunction experienced by Australians, and compare these with people in the United States. METHODS: A cross sectional, telephone interview survey of a randomly selected sample of men (n = 876) and women (n = 908) aged between 18 and 59 years on the electoral roll in all states and territories of Australia (response rate = 61%) was conducted between November 1999 and April 2000. RESULTS: Large proportions of Australian men (55.0%) and women (60.5%) reported at least one sexual problem within the preceding year. More serious sexual dysfunction (> 3 symptoms) was observed in 13.2% of men and 19.7% of women. DISCUSSION: Australia and the USA are similar with regard to the high rate of symptoms of sexual dysfunction observed in the population. The low rate of treatment points to both patient and doctor reluctance to discuss sexual performance and practices.