Effect of storage time and conditions on the cotyledon cell wall of the adzuki bean (Vigna angularis)

Two varieties of adzuki grown in Australia, Bloodwood and Erimo, were stored for up to 6 months at three temperatures (10, 20 and 30 degreesC), and two relative humidities (RH; 40 and 65%). The amount of cell wall material increased with time under all storage conditions. This increase was greatest at 30 degreesC and 40% RH. Storage time and conditions did not affect the total pectin levels in the cell wall. Erimo constantly exhibited a higher total pectin level than Bloodwood. The Bloodwood soluble pectin, Ca++ and Mg++ and Erimo Ca++ in the cell wall remained stable during storage, while the Erimo soluble pectin and Mg++ exhibited a slight decrease at 20 and 30 degreesC after 3 months of storage. (C) 2002 Elsevier Science Ltd. All rights reserved.

Discrimination among host plants (Leucaena species and accessions) by the psyllid pest Heteropsylla cubana and implications for understanding resistance

1 The herbivorous bug Heteropsylla cubana Crawford (Homoptera: Psyllidae) is a pest of the cattle fodder crop Leucaena (Leguminosae: Mimosoideae). The interaction between the psyllid and three varieties of its Leucaena host plant was investigated in relation to the apparent resistance of some Leucaena varieties (Leucaena leucocephala, Leucaena pallida and their hybrids) to attack. 2 Field trials demonstrated that adult psyllids distinguished among the different varieties of Leucaena over a distance, and were attracted to L. leucocephala in significantly higher numbers than to L. pallida or to the hybrid. Pesticide treatment increased the attractiveness of Leucaena plants, even of those deemed to be psyllid resistant. Numbers of psyllid eggs and nymphs, sampled in the field, reflect the arrival rates of adults at the three plant varieties. 3 Wavelength reflectance data of the three Leucaena varieties were not significantly different from one another, suggesting that psyllids cannot discriminate among the three plants using brightness or wavelength cues. There was a differential release of caryophyllene among the three varieties. Release of caryophyllene in L. leucocephala and the hybrid appeared to be influenced by environmental conditions. 4 Experiments demonstrated that caryophyllene (at least on its own) did not influence the behaviour of leucaena psyllids in relation to leucaena plants. 5 The results suggest that host plant volatiles cannot be dismissed as significant in the interaction between the leucaena psyllid and its Leucaena host plants. Further avenues for investigation are recommended and these are related to novel ways of understanding resistance in insect plant inter-relationships.

Identifying and discriminating among lucerne cultivars using plant morphological characters

The use of morphological data obtained from field (plot test) and glasshouse trials to identify and discriminate among four Iranian and two New Zealand lucerne (Medicago sativa L.) cultivars was investigated, following guidelines established by the International Union for the Protection of New Varieties of Plants (UPOV) for cultivar registration and the Organisation for Economic Co-operation and Development (OECD) for seed certification. Data were collected for terminal leaflet length, width and ratio, angle of stem growth, date of first flowering, stem height at first flowering, flower colour, cutting recovery height, and disease scores. None of these characters were sufficient to identify or discriminate among the six cultivars. The results indicate a need to find cost-effective and efficient laboratory techniques to enhance the assessment of distinctness of lucerne cultivars (UPOV) and for determining cultivar purity for lucerne seed certification (OECD).

Relationships between hard-seededness and seed weight in mungbean (Vigna radiata) assessed by QTL analysis

Weather damage reduces the value of commercial mungbean, but hard-seededness can reduce the level of damage. However, attempts to breed large- and hard-seeded mungbean varieties have been unsuccessful. To understand the relationship between seed weight and hard-seededness, these traits were investigated using a quantitative trait loci (QTL) mapping approach with a recombinant inbred population derived from a cross between a completely soft-seeded variety and a completely hard-seeded genotype. The two parental genotypes also had a sixfold difference in seed weight. QTL analyses revealed four loci for hard-seededness and I I loci for seed weight. Two of the hardseededness loci co-localized with seed weight QTL. When seed weight was used as a covariate in the analysis of hard-seededness from the field data, two of the four hard-seeded QTL remained significant with the effect at one of these remaining unchanged. These results explain why retaining hard-seededness in large seeded mungbean lines has been unsuccessful. The existence of a persistent locus, however, indicated that breeding large and persistently hard-seeded varieties of mungbean may be possible.

Cognitive modelling and the behaviour genetics of reading

While it is well known that reading is highly heritable, less has been understood about the bases of these genetic influences. In this paper, we review the research that we have been conducting in recent years to examine genetic and environmental influences on the particular reading processes specified in the dual-route cognitive model of reading. We argue that a detailed understanding of the role of genetic factors in reading acquisition requires the delineation and measurement of precise phenotypes, derived from well-articulated models of the reading process. We report evidence for independent genetic influences on the lexical and nonlexical reading processes represented in the dual-route model, based on studies of children with particular subtypes of dyslexia, and on univariate and multivariate genetic modelling of reading performance in the normally reading population.

Comparison of virulence gene profiles of Escherichia coli strains isolated from healthy and diarrheic swine

A combination of uni- and multiplex PCR assays targeting 58 virulence genes (VGs) associated with Escherichia coli strains causing intestinal and extraintestinal disease in humans and other mammals was used to analyze the VG repertoire of 23 commensal E. coli isolates from healthy pigs and 52 clinical isolates associated with porcine neonatal diarrhea (ND) and postweaning diarrhea (PWD). The relationship between the presence and absence of VGs was interrogated using three statistical methods. According to the generalized linear model, 17 of 58 VGs were found to be significant (P < 0.05) in distinguishing between commensal and clinical isolates. Nine of the 17 genes represented by iha, hlyA, aidA, east1, aah, fimH, iroN(E).(coli), traT, and saa have not been previously identified as important VGs in clinical porcine isolates in Australia. The remaining eight VGs code for fimbriae (F4, F5, F18, and F41) and toxins (STa, STh, LT, and Stx2), normally associated with porcine enterotoxigenic E. coli. Agglomerative hierarchical algorithm analysis grouped E. coli strains into subclusters based primarily on their serogroup. Multivariate analyses of clonal relationships based on the 17 VGs were collapsed into two-dimensional space by principal coordinate analysis. PWD clones were distributed in two quadrants, separated from ND and commensal clones, which tended to cluster within one quadrant. Clonal subclusters within quadrants were highly correlated with serogroups. These methods of analysis provide different perspectives in our attempts to understand how commensal and clinical porcine enterotoxigenic E. coli strains have evolved and are engaged in the dynamic process of losing or acquiring VGs within the pig population.

Iron (Fe) bioavailability and the distribution of anti-Fe nutrition biochemicals in the unpolished, and bran fraction of five rice gei polished grain riotypes

Iron (Fe) bioavailability in unpolished, polished grain and bran fraction of five rice genotypes with a range of Fe contents was measured by in vitro digestion and cultured Caco-2 cells of cooked grain. There was a significant difference in Fe bioavailability among the five rice genotypes tested, in both the unpolished and polished grain. The range of Fe bioavailability variation in polished rice was much wider than that of unpolished, suggesting the importance of using Fe levels and bioavailability in polished rice grain as the basis for selecting high-Fe rice cultivars for both agronomic and breeding purposes. Milling and polishing the grain to produce polished (or white) rice increased Fe bioavailability in all genotypes. Iron bioavailability in polished rice was high in the UBON2 and Nishiki, intermediate in both IR68144 and KDML105, and low in CMU122. All genotypes had low bioavailability of Fe in bran fraction compared to unpolished and polished grain, except in CMU122. CMU122 contained the lowest level of bioavailable Fe in unpolished and polished grain and bran, because of the dark purple pericarp colored grain and associated tannin content. The level of bioavailable Fe was not significantly correlated with grain Fe concentration or grain phytate levels among these five genotypes tested. The negative relationship between Fe bioavailability and the levels of total extractable phenol was only observed in unpolished (r = -0.83**) and bran fraction (r = -0.50*). The present results suggested that total extractable phenol and tannin contents could also contribute to lowering bioavailability of Fe in rice grain, in addition to phytate. (c) 2006 Society of Chemical Industry

Mapping the I-3 gene for resistance to Fusarium wilt in tomato: application of an I-3 marker in tomato improvement and progress towards the cloning of I-3

Fusarium wilt of tomato, caused by the fungal pathogen, Fusarium oxysporum f. sp. lycopersici (Fol), is an economically damaging disease that results in huge losses in Australia and other countries worldwide. The I-3 gene, which confers resistance to Fol race 3, has been described in wild tomato, Lycopersicon pennellii, accessions LA716 and PI414773. We are pursuing the isolation of I-3 from LA716 by map-based cloning. We have constructed a high-resolution map of the I-3 region and have identified markers closely flanking I-3 as well as markers co-segregating with I-3. In addition, construction of a physical map based on these markers has been initiated. This review describes the context of our research and our progress towards isolating the I-3 gene. It also describes some important practical outcomes of our work, including the development and use of a PCR-based marker for marker-assisted selection for I-3, and the finding that the I-3 gene from LA716 is different to that from PI1414773, which we have now designated I-7. Tomato varieties combining I-3 and I-7 have been developed and are currently being introduced into commercial production to further safeguard tomato crops against Fusarium wilt.

Varieties of algebras arising from K-perfect m-cycle systems

A class of algebras forms a variety if it is characterised by a collection of identities. There is a well-known method, often called the standard construction, which gives rise to algebras from m-cycle systems. It is known that the algebras arising from {1}-perfect m-cycle systems form a variety for m is an element of {3, 5} only, and that the algebras arising from {1, 2}-perfect m-cycle systems form a variety for m is an element of {3, 5, 7} only. Here we give, for any set K of positive integers, necessary and sufficient conditions under which the algebras arising from K-perfect m-cycle systems form a variety. (c) 2006 Elsevier B.V. All rights reserved.

Acibenzolar-S-methyl and methyl jasmonate treatments of glasshouse-grown freesias suppress post-harvest petal specking caused by Botrytis cinerea

Compounds that activate host plant defence responses potentially offer socio-environmentally sound alternative methods for disease control. In a series of glasshouse trials over 2 years, pre-harvest sprays with acibenzolar-S-methyl (ASM) and methyl jasmonate (MeJA) were tested for suppression of post-harvest infection of cut Freesia hybrida L. flowers by Botrytis cinerea. For the ASM treatments, variability in reducing the incidence of B. cinerea disease was observed between years freesia varieties, incubation temperatures and ASM concentrations. In the first year, the greatest reductions in lesion numbers on ASM-treated var. 'Cote d'Azur' were recorded using 2.86 mM ASM. For three different post-harvest temperature regimes, the relative reductions in lesion numbers, compared to untreated controls, were 45% at 5 degrees C, 40% at 12 degrees C and 30% at 20 degrees C, respectively. In the second year, lesion numbers were most reduced using 1.43 mM ASM to treat freesia var. 'Dukaat' flowers. Here, the relative reductions were to 44% at 5 degrees C, 26% at 12 degrees C and 51% at 20 degrees C. MeJA treatments were, in general, more consistently effective than ASM treatments in reducing lesion numbers and lesion diameters on cut freesia flowers. MeJA-treated (0.2 mM) freesia flowers (var. 'Dukaat') incubated at 20 degrees C showed relative reductions of 62%, and 45% for lesion number and lesion diameter, respectively. The differing efficacy between ASM and MeJA treatments could be attributed to their differential abilities to induce the salicylic acid (SA)-mediated vs. the jasmonic acid (JA)-mediated host defence pathways, respectively.

Grain yield components of pearl millet under optimum conditions can be used to identify germplasm with adaptation to and zones

There is evidence that high-tillering, small-panicled pearl millet landraces are better adapted to the severe, unpredictable drought stress of the and zones of NW India than are low-tillering, large-panicled modern varieties, which significantly outyield the landraces under favourable conditions. In this paper, we analyse the relationship of and zone adaptation with the expression, under optimum conditions, of yield components that determine either the potential sink size or the ability to realise this potential. The objective is to test whether selection under optimal conditions for yield components can identify germplasm with adaptation to and zones in NW India, as this could potentially improve the efficiency of pearl millet improvement programs targeting and zones. We use data from an evaluation of over 100 landraces from NW India, conducted for two seasons under both severely drought-stressed and favourable conditions in northwest and south India. Trial average grain yields ranged from 14 g m(-2) to 182 g m(-2). The landraces were grouped into clusters, based on their phenology and yield components as measured under well-watered conditions in south India. In environments without pre-flowering drought stress, tillering type had no effect on potential sink size, but low-tillering, large-panicled landraces yielded significantly more grain, as they were better able to realise their potential sink size. By contrast, in two low-yielding and zone environments which experienced pre-anthesis drought stress, low-fillering, large-panicled landraces yielded significantly less grain than high-tillering ones with comparable phenology, because of both a reduced potential sink size and a reduced ability to realise this potential. The results indicate that the high grain yield of low-tillering, large-panicled landraces under favourable conditions is due to improved partitioning, rather than resource capture. However, under severe stress with restricted assimilate supply, high-tillering, small-panicled landraces are better able to produce a reproductive sink than are large-panicled ones. Selection under optimum conditions for yield components representing a resource allocation pattern favouring high yield under severe drought stress, combined with a capability to increase grain yield if assimilates are available, was more effective than direct selection for grain yield in identifying germplasm adapted to and zones. Incorporating such selection in early generations of variety testing could reduce the reliance on random stress environments. This should improve the efficiency of millet breeding programs targeting and zones. (c) 2005 Elsevier B.V. All rights reserved.

Present and future potential of pineapple biotechnology

Pineapple is an important crop for many countries in Central and South America as well as the Asia-Pacific region. Even though the history of the crop dates to pre-Colombian times there is a remarkable lack of commercial varieties with a single cultivar ‘Smooth Cayenne’ dominating the whole industry. Variety improvement is a very difficult task for pineapple breeders and very little progress has been made in this respect when compared to other crops more suitable to classical breeding approaches. This special characteristic makes pineapple specially suited for genetic engineering approaches that can transfer specific traits from other species into pineapple. In this presentation past and present efforts to use biotechnological methods for the improvement of pineapple will be reviewed. On-going biotechnology projects include control of flowering and control of ‘blackheart’ disease. The development of pineapple biotechnology, as with any other crop, is dependent on the availability of a number of molecular tools, which will also be discussed. For pineapple, these tools can be roughly classified into three different categories: (1) availability of useful genes (2) availability of suitable promoters and (3) availability of an efficient transformation method.

Mapping genes for resistance to net form of net blotch and strip rust in barley (Hordeum vulgare L.)

A dihaploid mapping population comprising 65 lines was developed between barley parent varieties Tallon and Kaputar and used to construct a genetic linkage map. This map, comprising 195 amplified fragment length polymorphism and 38 simple sequence repeat markers, was used to identify markers linked to the net form of net blotch (Pyrenophora teres f.sp. teres) and to stripe rust (Puccinia striiformis f.sp. hordei) in barley. The population was screened with five pathotypes of net blotch at the seedling stage in the glasshouse and subjected to a natural inoculation in Hermitage, Queensland. Stripe rust screening was conducted at the adult plant stage in Toluca, Mexico. Analyses of the markers were performed using Mapmanager and Qgene software. One region on chromosome 6H was highly significantly associated with resistance to the net blotch (R2 = 79%). This association was consistent for all pathotypes studied. One region on chromosome 5H was found to be highly significantly associated with resistance to stripe rust (R2= 65%). There are a number of very closely linked markers showing strong associations in these regions, and these markers present an opportunity for marker assisted selection of these traits in barley breeding programs.