The implications of simultaneous smoking initiation for inferences about the genetics of smoking behavior from twin data

We examined early social influences across stages of smoking within the context of a twin study using an environmental exposure specific to smoking: whether twins started smoking at the same time (simultaneous smoking initiation: SSI). We expected that SSI would be a good index of shared social influences on smoking initiation. Rates of SSI were indeed significantly higher in MZ twins and in twins who shared peers and classes, as well as in male twins. With the exception of regular smoking in females, we found no significant difference in estimates of genetic and environmental parameters between SSI and non-SSI pairs for any of the smoking measures that we examined (DSM-IV and Fagerstrom HSI measures of nicotine dependence; DSM-IV nicotine withdrawal; heavy smoking; and in males, regular smoking). For regular smoking in females, allowing for additional shared environmental influences associated with SSI only modestly reduced our estimates of additive genetic variance (56% vs. 68%). These results indicate the important social influences that may occur for smoking initiation do not appear to seriously bias estimates of genetic effects on later stages of smoking.

Changes in the initiation of heroin use after a reduction in heroin supply

Increasing heroin use in Australia over the past 30 years has been associated with a decline in the age of initiation to heroin use. The 2001 Australian heroin shortage was used to assess the effects of a reduction in heroin supply on age of initiation into heroin injecting. Data collected from regular injecting drug users (IDU) over the period 1996-2004 as part of the Australian Illicit Drug Reporting System were examined for changes in self- reported age of first heroin use after the onset of the heroin shortage. Estimates were also made of the number of young people who may not have commenced injecting heroin during the heroin shortage. The proportion of IDU interviewed in the IDRS who were aged

Genotypic variation for cold tolerance during reproductive development in rice: Screening with cold air and cold water

Rice (Oryza sativa L.) plants are susceptible to low temperature during the young microspore stage, which occurs 10-12 days before heading. Low temperature at this time increases spikelet sterility which can cause massive yield loss. Increasing the cold tolerance of cultivars can reduce yield variability in temperate rice-growing environments. Two experiments were conducted in cold air screenings and two were conducted in cold water screenings to examine genotypic variation for cold tolerance, explore flowering traits related to spikelet sterility, and investigate whether the results reflect the level of cold tolerance determined previously in the field. Cold air screenings imposed day/night temperatures of 27 degrees C/13 degrees C, 25 degrees C/15 degrees C and 32 degrees C/25 degrees C following particle initiation until 50% heading, while cold water screenings maintained a relatively constant 19 degrees C. The variation in the commencement of low air temperature treatment did not have an effect on the level of spikelet sterility, indicating that exposure to low temperature during the young microspore stage was more important than the duration of exposure. Spikelet sterility of common cultivars showed a significant correlation between cold air and cold water screenings (r(2) = 0.63, p < 0.01), cold air and field screenings (r(2) = 0.52, p < 0.01) and cold water and field screenings (r(2) = 0.53, p < 0.01), indicating that cold air and cold water can be used for screening genotypes for low temperature tolerance. HSC55, M 103 and Jyoudeki were identified as cold tolerant and Doongara, Sasanishiki and Nipponbare as susceptible cultivars. There was a significant negative relationship between spikelet sterility and both the number of engorged pollen grains per anther and anther area only after imposing cold air and cold water treatment hence, it was concluded that these flowering traits were facultative in nature. In addition, cultivars originating from Australia and California were inefficient at producing filled grain with similar sized anthers containing a similar number of engorged pollen grains as cultivars from other origins. One suggested reason for this poor conversion to filled grain of cultivars from Australia and California may be associated with their small stigma area, particularly when exposed to low temperature conditions. (c) 2006 Elsevier B.V. All rights reserved.

Genetic and Cultural Transmission of Smoking Initiation: An Extended Twin Kinship Model

Background Considerable evidence from twin and adoption studies indicates that genetic and shared environmental factors play a significant role in the initiation of smoking behavior. Although twin and adoption designs are powerful to detect genetic and environmental influences, they do not provide information on the processes of assortative mating and parent–offspring transmission and their contribution to the variability explained by genetic and/or environmental factors. Methods We examined the role of genetic and environmental factors for smoking initiation using an extended kinship design. This design allows the simultaneous testing of additive and non-additive genetic, shared and individual-specific environmental factors, as well as sex differences in the expression of genes and environment in the presence of assortative mating and combined genetic and cultural transmission. A dichotomous lifetime smoking measure was obtained from twins and relatives in the Virginia 30,000 sample. Results Results demonstrate that both genetic and environmental factors play a significant role in the liability to smoking initiation. Major influences on individual differences appeared to be additive genetic and unique environmental effects, with smaller contributions from assortative mating, shared sibling environment, twin environment, cultural transmission and resulting genotype–environment covariance. The finding of negative cultural transmission without dominance led us to investigate more closely two possible mechanisms for the lower parent–offspring correlations compared to the sibling and DZ twin correlations in subsets of the data: (i) age × gene interaction, and (ii) social homogamy. Neither mechanism provided a significantly better explanation of the data, although age regression was significant. Conclusions This study showed significant heritability, partly due to assortment, and significant effects of primarily non-parental shared environment on smoking initiation.

A longitudinal controlled study of factors associated with mutans streptococci infection and caries lesion initiation in children 21 to 72 months old

Purpose: The purpose of this longitudinal study was to determine factors associated with mutans streptococci (MS) infection and development of caries lesions in a group of children 21 to 72 months old. Methods: The 63 caries-free children, recruited since birth, were divided into: (1) a study group of 24 children who were colonized with MS; and (2) a control group of 39 children without MS. The children were recalled every 3 months for approximately 24 months, and their social, medical, and dental histories were updated. At each recall, the teeth were checked for presence or absence of plaque, enamel hypoplasia, and caries lesions, and their MS status was assessed using a commercial test kit. Results: MS infection was associated with: (1) visible plaque (P < .01); (2) enamel hypoplasia (P < .05); (3) commencement of tooth-brushing after 12 months of age (P < .05); (4) lack of parental assistance with tooth-brushing (P < .025); and (5) increased hours of child care/school (P < .05). Four children (20%) were colonized at an age range of 21 to 36 months, 9 (45%) at 37 to 48 months, and 7 (35%) at 49 to 72 months (P < .001). Eight children who developed caries lesions: (1) had more hypoplastic teeth (P < .001); (2) ate sugar-containing snacks (P < .05); and (3) did not brush regularly with chlorhexidine gel (P < .01) compared to those who remained free of caries lesions. Conclusions: Lack of oral hygiene, consumption of sugar-containing snacks, and enamel hypoplasia are significant factors for both MS infection and caries lesion initiation.

Breastfeeding and the responsibilities of GPs: a qualitative study of general practice registrars

The most recent National Health Survey reports that more than 80% of women initiate breastfeeding, while recent studies describe initiation rates of more than 90%. Yet fewer than 50% of women continue to breastfeed for 6 months or longer. This is at odds with National Health and Medical Research Council recommendations that 80% of infants be exclusively breastfed for the first 6 months of life. Women are more likely to initiate and continue to breastfeed if their doctor supports and encourages them to do so. Conversely, women perceive a neutral attitude by doctors toward breastfeeding to be similar to a negative attitude. Therefore, while doctors may not perceive their support or encouragement to be a determining factor in a woman’s breastfeeding decisions, women often place great emphasis on their GP's attitude to breastfeeding and are much more likely to think that information provided by a doctor is important. No previous research in Australia has addressed the issue of how GPs perceive their roles and responsibilities regarding breastfeeding. As part of a larger research project investigating the breastfeeding skills and knowledge of general practice registrars, this article reports the results of qualitative interviews with eight general practice registrars and their views and beliefs about GPs’ responsibilities to breastfeeding women.

A Step-by-Step Approach to Transit Oriented Development Project Delivery

A major challenge in successfully implementing transit-oriented development (TOD) is having a robust process that ensures effective appraisal, initiation and delivery of multi-stakeholder TOD projects. A step-by step project development process can assist in the methodic design, evaluation, and initiation of TOD projects. Successful TOD requires attention to transit, mixed-use development and public space. Brisbane, Australia provides a case-study where recent planning policies and infrastructure documents have laid a foundation for TOD, but where barriers lie in precinct level planning and project implementation. In this context and perhaps in others, the research effort needs to shift toward identification of appropriate project processes and strategies. This paper presents the outcomes of research conducted to date. Drawing on the mainstream approach to project development and financial evaluation for property projects, key steps for potential use in successful delivery of TOD projects have been identified, including: establish the framework; location selection; precinct context review; preliminary precinct design; the initial financial viability study; the decision stage; establishment of project structure; land acquisition; development application; and project delivery. The appropriateness of this mainstream development and appraisal process will be tested through stakeholder research, and the proposed process will then be refined for adoption in TOD projects. It is suggested that the criteria for successful TOD should be broadened beyond financial concerns in order to deliver public sector support for project initiation.

Stress corrosion crack propagation in AerMet 100

Fracture mechanics tests were carried out for AerMet 100 in distilled water and NaCl (3.5 and 35 gl(-1)). The initiation period at higher values of the stress intensity factor indicated that load application in the stress corrosion cracking (SCC) environment is a necessary but not sufficient factor for SCC and that time is needed for some other factor (e.g., the local hydrogen concentration) to reach an appropriate value. The threshold stress intensity factor, K-ISSC, was found to increase with decreasing NaCl concentration. The plateau stress corrosion crack velocity was 2 x 10(-8) ms(-1) for NaCl (3.5 and 35 gl(-1)). The fracture mode was transgranular with small areas of an intergranular nature. (C) 1998 Chapman & Hall.

Linearly-increasing-stress testing of carbon steel in 4 N NaNO3 and in Bayer liquor

This paper reports the application of linearly increasing stress testing (LIST) to the study of stress corrosion cracking (SCC) of carbon steel in 4 N NaNO3 and in Bayer liquor. LIST is similar to the constant extension-rate testing (CERT) methodology with the essential difference that the LIST is load controlled whereas the CERT is displacement controlled. The main conclusion is that LIST is suitable for the study of the SCC of carbon steels in 4 N NaNO3 and in Bayer liquor. The low crack velocity in Bayer liquor and a measured maximum stress close to that of the reference specimen in air both indicate that a low applied stress rate is required to study SCC in this system. (C) 1998 Chapman & Hall.