Study of wet porous filtration

A growing demand for efficient air quality management calls for the development of technologies capable of meeting the stringent requirements now being applied in areas of chemical, biological and medical activities. Currently, filtration is the most effective process available for removal of fine particles from carrier gases. Purification of gaseous pollutants is associated with adsorption, absorption and incineration. In this paper we discuss a new technique for highly efficient simultaneous purification of gaseous and particulate pollutants from carrier gases, and investigate the utilization of Nuclear Magnetic Resonance (NMR) imaging for the study of the dynamic processes associated with gas-liquid flow in porous media. Our technique involves the passage of contaminated carrier gases through a porous medium submerged into a liquid, leading to the formation of narrow and tortuous pathways through the medium. The wet walls of these pathways result in outstanding purification of gaseous, liquid and solid alien additives. NMR imaging was successfully used to map the gas pathways inside the porous medium submerged into the liquid layer. (C) 2002 Elsevier Science B.V. All rights reserved.

The regulation of complementary health: sacrificing integrity?

In response to the increasing use of complementary and alternative medicine (CAM), governments are exploring ways to ensure patients' safety and respond to complaints. One solution is to establish registration boards and procedures based on the model of existing health practitioner Acts. Registration will require defined minimum standards for competence, which will have to be based on scientific evidence. As scientific evidence accumulates, these modalities are likely to lose their identities as alternative and become assimilated into Western medicine.

Balancing the number and size of sites: An economic approach to the optimal design of cluster samples

The design of randomized controlled trials entails decisions that have economic as well as statistical implications. In particular, the choice of an individual or cluster randomization design may affect the cost of achieving the desired level of power, other things being equal. Furthermore, if cluster randomization is chosen, the researcher must decide how to balance the number of clusters, or sites, and the size of each site. This article investigates these interrelated statistical and economic issues. Its principal purpose is to elucidate the statistical and economic trade-offs to assist researchers to employ randomized controlled trials that have desired economic, as well as statistical, properties. (C) 2003 Elsevier Inc. All rights reserved.

In situ characterization of stickiness of sugar-rich foods using a linear actuator driven stickiness testing device

A stickiness testing device based on the probe tack test has been designed and tested. It was used to perform in situ characterization of drying hemispherical drops with an initial radius 3.5 mm. Tests were carried out in two drying temperatures, 63 and 95 degreesC. Moisture and temperature histories of the drying drops of fructose, honey, sucrose, maltodextrin and sucrose-maltodextrin mixtures were determined. The rates of moisture evaporation of the fructose solution was the fastest while those of the maltodextrin solution was the lowest. A profile reversal was observed when the temperature profiles of these materials were compared. Different modes of failure were observed during the stickiness tests. Pure fructose and honey solutions remained completely sticky and failed cohesively until the end of drying. Pure sucrose solution remained sticky and failed cohesively until complete crystallization occurred. The surface of the maltodextrin drops formed a skin shortly after the start of drying. It exhibited adhesive failure and reached a state of non-adhesion. Addition of maltodextrin significantly altered the stickiness of sucrose solution. (C) 2002 Elsevier Science Ltd. All rights reserved.

Modified logit life table system: Principles, empirical validation, and application

Despite its widespread use, the Coale-Demeny model life table system does not capture the extensive variation in age-specific mortality patterns observed in contemporary populations, particularly those of the countries of Eastern Europe and populations affected by HIV/AIDS. Although relational mortality models, such as the Brass logit system, can identify these variations, these models show systematic bias in their predictive ability as mortality levels depart from the standard. We propose a modification of the two-parameter Brass relational model. The modified model incorporates two additional age-specific correction factors (gamma(x), and theta(x)) based on mortality levels among children and adults, relative to the standard. Tests of predictive validity show deviations in age-specific mortality rates predicted by the proposed system to be 30-50 per cent lower than those predicted by the Coale-Demeny system and 15-40 per cent lower than those predicted using the original Brass system. The modified logit system is a two-parameter system, parameterized using values of l(5) and l(60).

Evidence and information for health policy: a decade of change

Over the past decade or so, there has been increasing demand for greater clarity about the major causes of disease and injury, how these differentially affect populations, and how they are changing. In part, this demand has been motivated by resource constraints and a realisation that better health is possible with more informed allocation of resources. At the same time, there has been a change in the way population health and its determinants are quantified, with a much closer integration of the quantitative population sciences (such as epidemiology, demography and health economics) to strengthen and broaden the evidence base for healthcare policy.

The use of online health techniques to assist with the delivery of specialist paediatric diabetes services in Queensland

We have tested an alternative method of delivering health services to regional areas of Queensland. By integrating telepaediatrics into an existing outreach programme for children with diabetes and endocrine conditions, we were able to reduce travel for specialist hospital staff while maintaining (and sometimes increasing) the contact patients had with the specialist team. In the first 28 months, we facilitated 160 patient consultations and 10 education sessions via videoconference through the telepaediatric service. By the end of the study, site visits were taking place annually and routine videoconference clinics were scheduled quarterly for the review of new patients and follow-up. Telepaediatric services in endocrinology and diabetes were established at three levels: the coordination of routine specialist clinics via videoconference; ad hoc patient consultations for collaborative management during acute presentations and at times of urgent clinical need; and the delivery of education to staff and patients throughout the state. The net result was improved access to specialist services from rural and remote areas of Queensland.

The family costs of attending hospital outpatient appointments via videoconference and in person

We compared the costs incurred by families attending outpatient appointments at the Royal Children's Hospital (RCH) in Brisbane with those incurred by families who had a consultation via videoconference in their regional area. In each category 200 families were interviewed. The median time spent travelling for videoconferences was 30 min compared with 80 min for face-to-face appointments. Families interviewed in the outpatient department had travelled a median distance of 70 km, while those who had a videoconference at the local hospital had travelled only 20 km. It cost these families much more to attend an appointment at the RCH than to attend a videoconference. Ninety-six per cent of families (193) reported at least one of the following types of expense: 150 families had expenses related to parking (median A$10), 156 had fuel expenses (median A$10) and 122 reported costs related to meals purchased at the RCH (median A$10). Only 21 families who had their appointment via local videoconference reported any additional costs. Specialist appointments via videoconference were a more convenient and cheaper option for families living in regional areas of Queensland than the conventional method of attending outpatient appointments at the specialist hospital in Brisbane.

Strength and attrition resistance of agglomerates and particulate coatings

The mechanical properties of a range of agglomerates and particulate coatings have been measured using a nanoindenter. The effect of formulation properties such as powder and binder properties on coating hardness is described. An attempt is also made to measure the fracture hardness with the nanoindenter. The use of indentation technology to measure fundamental agglomerate properties is critically analysed. Based on the indentation measurements and standard attrition test results, the coating hardness is found closely related to the attrition rate under standard conditions and can be used to screen different powder/binder formulations. (C) 2002 Elsevier Science B.V All rights reserved.

Flow patterns in granulating systems

Particle flow patterns were investigated for wet granulation and dry powder mixing in ploughshare mixers using Positron Emission Particle Tracking (PEPT). In a 4-1 mixer, calcium carbonate with mean size 45 mum was granulated using a 50 wt.% solution of glycerol and water as binding fluid, and particle movement was followed using a 600-mum calcium hydroxy-phosphate tracer particle. In a 20-1 mixer, dry powder flow was studied using a 600-mum resin bead tracer particle to simulate the bulk polypropylene powder with mean size 600 mum. Important differences were seen between particle flow patterns for wet and dry systems. Particle speed relative to blade speed was lower in the wet system than in the dry system, with the ratios of average particle speed to blade tip speed for all experiments in the range 0.01-015. In the axial plane, the same particle motion was observed around each blade; this provides a significant advance for modelling flow in ploughshare mixers. For the future, a detailed understanding of the local velocity, acceleration and density variations around a plough blade will reveal the effects of flow patterns in granulating systems on the resultant distribution of granular product attributes such as size, density and strength. (C) 2002 Elsevier Science B.V All rights reserved.