Parameters affecting the performance of wetting and drying in a two-dimensional finite element long wave hydrodynamic model

The marsh porosity method, a type of thin slot wetting and drying algorithm in a two-dimensional finite element long wave hydrodynamic model, is discussed and analyzed to assess model performance. Tests, including comparisons to simple examples and theoretical calculations, examine the effects of varying the marsh porosity parameters. The findings demonstrate that the wetting and drying concept of marsh porosity, often used in finite element hydrodynamic modeling, can behave in a more complex manner than initially expected.

A dynamic mathematical model for sequential leach bed anaerobic digestion of organic fraction of municipal solid waste

A mathematical model that describes the operation of a sequential leach bed process for anaerobic digestion of organic fraction of municipal solid waste (MSW) is developed and validated. This model assumes that ultimate mineralisation of the organic component of the waste occurs in three steps, namely solubilisation of particulate matter, fermentation to volatile organic acids (modelled as acetic acid) along with liberation of carbon dioxide and hydrogen, and methanogenesis from acetate and hydrogen. The model incorporates the ionic equilibrium equations arising due to dissolution of carbon dioxide, generation of alkalinity from breakdown of solids and dissociation of acetic acid. Rather than a charge balance, a mass balance on the hydronium and hydroxide ions is used to calculate pH. The flow of liquid through the bed is modelled as occurring through two zones-a permeable zone with high flushing rates and the other more stagnant. Some of the kinetic parameters for the biological processes were obtained from batch MSW digestion experiments. The parameters for flow model were obtained from residence time distribution studies conducted using tritium as a tracer. The model was validated using data from leach bed digestion experiments in which a leachate volume equal to 10% of the fresh waste bed volume was sequenced. The model was then tested, without altering any kinetic or flow parameters, by varying volume of leachate that is sequenced between the beds. Simulations for sequencing/recirculating 5 and 30% of the bed volume are presented and compared with experimental results. (C) 2002 Elsevier Science B.V. All rights reserved.

A framework and tool support for the systematic testing of model-based specifications

Formal specifications can precisely and unambiguously define the required behavior of a software system or component. However, formal specifications are complex artifacts that need to be verified to ensure that they are consistent, complete, and validated against the requirements. Specification testing or animation tools exist to assist with this by allowing the specifier to interpret or execute the specification. However, currently little is known about how to do this effectively. This article presents a framework and tool support for the systematic testing of formal, model-based specifications. Several important generic properties that should be satisfied by model-based specifications are first identified. Following the idea of mutation analysis, we then use variants or mutants of the specification to check that these properties are satisfied. The framework also allows the specifier to test application-specific properties. All properties are tested for a range of states that are defined by the tester in the form of a testgraph, which is a directed graph that partially models the states and transitions of the specification being tested. Tool support is provided for the generation of the mutants, for automatically traversing the testgraph and executing the test cases, and for reporting any errors. The framework is demonstrated on a small specification and its application to three larger specifications is discussed. Experience indicates that the framework can be used effectively to test small to medium-sized specifications and that it can reveal a significant number of problems in these specifications.

An internet GIS and spatial model to benchmark local government socio-economic performance

This paper develops an Internet geographical information system (GIS) and spatial model application that provides socio-economic information and exploratory spatial data analysis for local government authorities (LGAs) in Queensland, Australia. The application aims to improve the means by which large quantities of data may be analysed, manipulated and displayed in order to highlight trends and patterns as well as provide performance benchmarking that is readily understandable and easily accessible for decision-makers. Measures of attribute similarity and spatial proximity are combined in a clustering model with a spatial autocorrelation index for exploratory spatial data analysis to support the identification of spatial patterns of change. Analysis of socio-economic changes in Queensland is presented. The results demonstrate the usefulness and potential appeal of the Internet GIS applications as a tool to inform the process of regional analysis, planning and policy.

A genetic two-factor model of the covariation among a subset of Multidimensional Aptitude Battery and Wechsler Adult Intelligence Scale - Revised subtests

The phenotypic and genetic factor structure of performance on five Multidimensional Aptitude Battery (MAB) subtests and one Wechsler Adult Intelligence Scale-Revised (WAIS-R) subtest was explored in 390 adolescent twin pairs (184 monozygotic [MZ]; 206 dizygotic (DZ)). The temporal stability of these measures was derived from a subsample of 49 twin pairs, with test-retest correlations ranging from .67 to .85. A phenotypic factor model, in which performance and verbal factors were correlated, provided a good fit to the data. Genetic modeling was based on the phenotypic factor structure, but also took into account the additive genetic (A), common environmental (C), and unique environmental (E) parameters derived from a fully saturated ACE model. The best fitting model was characterized by a genetic correlated two-factor structure with specific effects, a general common environmental factor, and overlapping unique environmental effects. Results are compared to multivariate genetic models reported in children and adults, with the most notable difference being the growing importance of common genes influencing diverse abilities in adolescence. (C) 2003 Elsevier Inc. All rights reserved.

Optimal debt, endogenous fertility, and human capital externalities in a model with altruistic bequests

and human capital externalities. Because of such externalities, education investment is too low and fertility is too high. While education subsidies are the conventional means to deal with these problems, we show that the optimal policy also comprises debt even when distortionary taxes are used. The reason is that debt tips the usual trade-off between children's quantity and quality in favor of the latter by increasing the bequest cost of children. The optimal debt-output ratio exceeds 10% for plausible parameterization. (C) 2002 Elsevier B.V. All rights reserved.

Optimal price regulation in a growth model with monopolistic suppliers of intermediate goods

In this paper we investigate the trade-off faced by regulators who must set a price for an intermediate good somewhere between the marginal cost and the monopoly price. We utilize a growth model with monopolistic suppliers of intermediate goods. Investment in innovation is required to produce a new intermediate good. Marginal cost pricing deters innovation, while monopoly pricing maximizes innovation and economic growth at the cost of some static inefficiency. We demonstrate the existence of a second-best price above the marginal cost but below the monopoly price, which maximizes consumer welfare. Simulation results suggest that substantial reductions in consumption, production, growth, and welfare occur where regulators focus on static efficiency issues by setting prices at or near marginal cost.

Social-servicescape conceptual model

There is considerable evidence that environmental variables can substantially influence consumer behavior in service settings (cf. Turley and Milliman, 2000). However, research to date has focused on the effects of the physical elements (‘atmospherics’), with the social aspects (customers and service providers) of the environment largely ignored. First, we provide a review of the extant literature drawing on four major streams of research from (1) previous marketing (servicescapes); (2) environmental psychology (approach–avoidance theory, behavior setting theory); (3) social psychology (social facilitation theory); and (4) organizational behavior (affective events theory). Second, we present a new conceptual model, the ‘Social-servicescape’. In this paper we argue that the social environment and purchase occasion dictates the desired social density which influences customers’ affective and cognitive responses, including repurchase intentions. Furthermore, we argue that customers play a key role in influencing the emotions of others either positively or negatively, and this largely determines whether they intend to return to the service setting. Implications of this conceptual model for theory and practice are discussed.

Kinetic model for selective cultivation of microfungi in a microscreen process for food processing wastewater treatment and biomass production

The research was aimed at developing a technology to combine the production of useful microfungi with the treatment of wastewater from food processing. A recycle bioreactor equipped with a micro-screen was developed as a wastewater treatment system on a laboratory scale to contain a Rhizopus culture and maintain its dominance under non-aseptic conditions. Competitive growth of bacteria was observed, but this was minimised by manipulation of the solids retention time and the hydraulic retention time. Removal of about 90% of the waste organic material (as BOD) from the wastewater was achieved simultaneously. Since essentially all fungi are retained behind the 100 mum aperture screen, the solids retention time could be controlled by the rate of harvesting. The hydraulic retention time was employed to control the bacterial growth as the bacteria were washed through the screen at a short HRT. A steady state model was developed to determine these two parameters. This model predicts the effluent quality. Experimental work is still needed to determine the growth characteristics of the selected fungal species under optimum conditions (pH and temperature).

Exact solution, scaling behaviour and quantum dynamics of a model of an atom-molecule Bose-Einstein condensate

0We study the exact solution for a two-mode model describing coherent coupling between atomic and molecular Bose-Einstein condensates (BEC), in the context of the Bethe ansatz. By combining an asymptotic and numerical analysis, we identify the scaling behaviour of the model and determine the zero temperature expectation value for the coherence and average atomic occupation. The threshold coupling for production of the molecular BEC is identified as the point at which the energy gap is minimum. Our numerical results indicate a parity effect for the energy gap between ground and first excited state depending on whether the total atomic number is odd or even. The numerical calculations for the quantum dynamics reveals a smooth transition from the atomic to the molecular BEC.

Modulation of the antibody response by Porphyromonas gingivalis and Fusobacterium nucleatum in a mouse model

Successive immunization of mice with Fusobacterium nucleatum and Porphyromonas gingivalis has been shown to modulate the specific serum IgG responses to these organisms. The aim of this study was to investigate these antibody responses further by examining the IgG subclasses induced as well as the opsonizing properties of the specific antibodies. Serum samples from BALB/c mice immunized with F. nucleatum (gp1-F), P. gingivalis (gp2-P), P. gingivalis followed by F. nucleatum (gp3-PF) F. nucleatum followed by P. gingivalis (gp4-FP) or saline alone (gp5-S) were examined for specific IgG1 (Th2) and IgG2a (Th1) antibody levels using an ELISA and the opsonizing properties measured using a neutrophil chemiluminescence assay. While IgG1 and IgG2a subclasses were induced in all immunized groups, there was a tendency towards an IgG1 response in mice immunized with P. gingivalis alone, while immunization with F. nucleatum followed by P. gingivalis induced significantly higher anti-P. gingivalis IgG2a levels than IgG1. The maximum light output due to neutrophil phagocytosis of P. gingivalis occurred at 10 min using nonopsonized bacteria. Chemiluminescence was reduced using serum-opsonized P. gingivalis and, in particular, sera from P. gingivalis-immunized mice (gp2-P), with maximum responses occurring at 40 min. In contrast, phagocytosis of immune serum-opsonized F. nucleatum demonstrated peak light output at 10 min, while that of F. nucleatum opsonized with sera from saline injected mice (gp5-S) and control nonopsonized bacteria showed peak responses at 40 min. The lowest phagocytic response occurred using gp4-FP serum-opsonized F. nucleatum. In conclusion, the results of the present study have demonstrated a systemic Th1/Th2 response in mice immunized with P. gingivalis and/or F. nucleatum with a trend towards a Th2 response in P. gingivalis-immunized mice and a significantly increased anti-P. gingivalis IgG2a (Th1) response in mice immunized with F. nucleatum prior to P. gingivalis. Further, the inhibition of neutrophil phagocytosis of immune serum-opsonized P. gingivalis was modulated by the presence of anti-F. nucleatum antibodies, while anti-P. gingivalis antibodies induced an inhibitory effect on the phagocytic response to F. nucleatum.