Whispered voice test for screening for hearing impairment in adults and children: systematic review

Objective To determine the accuracy of the whispered voice test in detecting hearing impairment in adults and children. Design Systematic review of studies of test accuracy. Data sources Medline, Embase, Science Citation Index, unpublished theses, manual searching of bibliographies of known primary and review articles, and contact with authors. Study selection Two reviewers independently selected and extracted data on study characteristics, quality, and accuracy of studies. Studies were included if they had cross sectional designs, at least one of the index tests was the whispered voice test, and the reference test (audiometry) was performed on at least 80% of the participants. Data extraction Data were used to form 2x2 contingency tables with hearing impairment by audiometry as the reference standard. Data synthesis The eight studies that were found used six different techniques. The sensitivity in the four adult studies was 90% or 100% and the specificity was 70% to 87%. The sensitivity in the four childhood studies ranged from 80% to 96% and specificity ranged from 90% to 98%. Conclusion The whispered voice test is a simple and accurate test for detecting hearing impairment. There is some concern regarding the lower sensitivity in children and the overall reproducibility of the test, particularly in primary care settings. Further studies should be conducted in primary care settings to explore the influence of components of the testing procedure to optimise test sensitivity and to promote standardisation of the testing procedure.

How well does B-type natriuretic peptide predict death and cardiac events in patients with heart failure: systematic review

Objective To assess how well B-type natriuretic peptide (BNP) predicts prognosis in patients with heart failure. Design Systematic review of studies assessing BNP for prognosis m patients with heart failure or asymptomatic patients. Data sources Electronic searches of Medline and Embase from January 1994 to March 2004 and reference lists of included studies. Study selection and data extraction We included all studies that estimated the relation between BNP measurement and the risk of death, cardiac death, sudden death, or cardiovascular event in patients with heart failure or asymptomatic patients, including initial values and changes in values in response to treatment. Multivariable models that included both BNP and left ventricular ejection fraction as predictors were used to compare the prognostic value of each variable. Two reviewers independently selected studies and extracted data. Data synthesis 19 studies used BNP to estimate the relative risk of death or cardiovascular events in heart failure patients and five studies in asymptomatic patients. In heart failure patients, each 100 pg/ml increase was associated with a 35% increase in the relative risk of death. BNP was used in 35 multivariable models of prognosis. In nine of the models, it was the only variable to reach significance-that is, other variables contained no prognostic information beyond that of BNP. Even allowing for the scale of the variables, it seems to be a strong indicator of risk. Conclusion Although systematic reviews of prognostic studies have inherent difficulties, including die possibility of publication bias, the results of the studies in this review show that BNP is a strong prognostic indicator for both asymptomatic patients mid for patients with heart failure at all stages of disease.

R-matrices and the tensor product graph method

A systematic method for constructing trigonometric R-matrices corresponding to the (multiplicity-free) tensor product of any two affinizable representations of a quantum algebra or superalgebra has been developed by the Brisbane group and its collaborators. This method has been referred to as the Tensor Product Graph Method. Here we describe applications of this method to untwisted and twisted quantum affine superalgebras.

New product warranty: A literature review

Warranty is an important element of marketing new products as better warranty signals higher product quality and provides greater assurance to customers. Servicing warranty involves additional costs to the manufacturer and this cost depends on product reliability and warranty terms. Product reliability is influenced by the decisions made during the design and manufacturing of the product. As such warranty is very important in the context of new products. Product warranty has received the attention of researchers from many different disciplines and the literature on warranties is vast. This paper carries out a review of the literature that has appeared in the last ten years. It highlights issues of interest to manufacturers in the context of managing new products from an overall business perspective. (C) 2002 Elsevier Science B.V. All rights reserved.

Prediction of absolute rate coefficients and product branching ratios for the C(P-3) plus allene reaction system

Complex chemical reactions in the gas phase can be decomposed into a network of elementary (e.g., unimolecular and bimolecular) steps which may involve multiple reactant channels, multiple intermediates, and multiple products. The modeling of such reactions involves describing the molecular species and their transformation by reaction at a detailed level. Here we focus on a detailed modeling of the C(P-3)+allene (C3H4) reaction, for which molecular beam experiments and theoretical calculations have previously been performed. In our previous calculations, product branching ratios for a nonrotating isomerizing unimolecular system were predicted. We extend the previous calculations to predict absolute unimolecular rate coefficients and branching ratios using microcanonical variational transition state theory (mu-VTST) with full energy and angular momentum resolution. Our calculation of the initial capture rate is facilitated by systematic ab initio potential energy surface calculations that describe the interaction potential between carbon and allene as a function of the angle of attack. Furthermore, the chemical kinetic scheme is enhanced to explicitly treat the entrance channels in terms of a predicted overall input flux and also to allow for the possibility of redissociation via the entrance channels. Thus, the computation of total bimolecular reaction rates and partial capture rates is now possible. (C) 2002 American Institute of Physics.

The JK three-product cyclone - performance and potential applications

In spite of their wide application in comminution circuits, hydrocyclones have at least one significant disadvantage in that their operation inherently tends to return the fine denser liberated minerals to the grinding mill. This results in unnecessary overgrinding which adds to the milling cost and can adversely affect the efficiency of downstream processes. In an attempt to solve this problem, a three-product cyclone has been developed at the Julius Kruttschnitt Mineral Research Centre (JKMRC) to generate a second overflow in which the fine dense liberated minerals can be selectively concentrated for further treatment. In this paper, the design and operation of the three-product cyclone are described. The influence of the length of the second vortex finder on the performance of a 150-mm unit treating a mixture of magnetite and silica is investigated. Conventional cyclone tests were also conducted under similar conditions. Using the operational performance data of the three-product and conventional cyclones, it is shown that by optimising the length of the second vortex finder, the amount of fine dense mineral particles that reports to the three-product cyclone underflow can be reduced. In addition, the three-product cyclone can be used to generate middlings stream that may be more suitable for flash flotation than the conventional cyclone underflow, or alternatively, could be classified with a microscreen to separate the valuables from the gangue. At the same time, a fines stream having similar properties to those of the conventional overflow can be obtained. Hence, if the middlings stream was used as feed for flash flotation or microscreening, the fines stream could be used in lieu of the conventional overflow without compromising the feed requirements for the conventional flotation circuit. Some of the other potential applications of the new cyclone are described. (C) 2003 Elsevier Science B.V. All rights reserved.

Asymmetric blasting: a rock mass dependent blast design method

Blasting has been the most frequently used method for rock breakage since black powder was first used to fragment rocks, more than two hundred years ago. This paper is an attempt to reassess standard design techniques used in blasting by providing an alternative approach to blast design. The new approach has been termed asymmetric blasting. Based on providing real time rock recognition through the capacity of measurement while drilling (MWD) techniques, asymmetric blasting is an approach to deal with rock properties as they occur in nature, i.e., randomly and asymmetrically spatially distributed. It is well accepted that performance of basic mining operations, such as excavation and crushing rely on a broken rock mass which has been pre conditioned by the blast. By pre-conditioned we mean well fragmented, sufficiently loose and with adequate muckpile profile. These muckpile characteristics affect loading and hauling [1]. The influence of blasting does not end there. Under the Mine to Mill paradigm, blasting has a significant leverage on downstream operations such as crushing and milling. There is a body of evidence that blasting affects mineral liberation [2]. Thus, the importance of blasting has increased from simply fragmenting and loosing the rock mass, to a broader role that encompasses many aspects of mining, which affects the cost of the end product. A new approach is proposed in this paper which facilitates this trend 'to treat non-homogeneous media (rock mass) in a non-homogeneous manner (an asymmetrical pattern) in order to achieve an optimal result (in terms of muckpile size distribution).' It is postulated there are no logical reasons (besides the current lack of means to infer rock mass properties in the blind zones of the bench and onsite precedents) for drilling a regular blast pattern over a rock mass that is inherently heterogeneous. Real and theoretical examples of such a method are presented.

Warranty and optimal reliability improvement through product development

For products sold with warranty, the warranty servicing cost can be reduced by improving product reliability through a development process. However, this increases the unit manufacturing cost. Optimal development must achieve a trade-off between these two costs. The outcome of the development process is uncertain and needs to be taken into account in the determination of the optimal development effort. The paper develops a model where this uncertainty is taken into account. (C) 2003 Elsevier Ltd. All rights reserved.

Prolotherapy injections for chronic low back pain - A systematic review

Study Design. A systematic review of randomized and quasi-randomized controlled trials. Objectives. To determine the efficacy of prolotherapy injections in adults with chronic low back pain. Summary of Background Data. Prolotherapy is an injection-based treatment for chronic low back pain. Proponents of prolotherapy suggest that some back pain stems from weakened or damaged ligaments. Repeatedly injecting them with irritant solutions is thought to strengthen the ligaments and reduce pain and disability. Prolotherapy protocols usually include co-interventions to enhance the effectiveness of the injections. Methods. The authors searched MEDLINE, EMBASE, CINAHL, and Science Citation Index up to January 2004, and the Cochrane Controlled Trials Register 2004, issue 1, and consulted content experts. Both randomized and quasi-randomized controlled trials comparing prolotherapy injections to control injections, either alone or in combination with other treatments, were included. Studies had to include measures of pain and disability before and after the intervention. Two reviewers independently selected the trials and assessed them for methodologic quality. Treatment and control group protocols varied from study to study, making meta-analysis impossible. Results. Four studies, all of high quality and with a total of 344 participants, were included. All trials measured pain and disability levels at 6 months, three measured the proportion of participants reporting a greater than 50% reduction in pain or disability scores from baseline to 6 months. Two studies showed significant differences between the treatment and control groups for those reporting more than 50% reduction in pain or disability. Their results could not be pooled. In one, cointerventions confounded interpretation of results; in the other, there was no significant difference in mean pain and disability scores between the groups. In the third study, there was little or no difference between groups in the number of individuals who reported more than 50% improvement in pain and disability. The fourth study reporting only mean pain and disability scores showed no differences between groups. Conclusions. There is conflicting evidence regarding the efficacy of prolotherapy injections in reducing pain and disability in patients with chronic low back pain. Conclusions are confounded by clinical heterogeneity among studies and by the presence of co-interventions. There was no evidence that prolotherapy injections alone were more effective than control injections alone. However, in the presence of co-interventions, prolotherapy injections were more effective than control injections, more so when both injections and co-interventions were controlled concurrently.

Community-based programmes to prevent pedestrian injuries in children 0-14 years: A systematic review

Community-based models for injury prevention have become an accepted part of the overall injury control strategy. This systematic review of the scientific literature examines the evidence for their effectiveness in reducing pedestrian injury in children 0-14 years of age. A comprehensive search of the literature was performed using the following study selection criteria: community-based intervention study; target population was children under 14 years; outcome measure is either pedestrian injury rates or observed child pedestrian or vehicle driver behaviour; and use of a community control or an historical control in the study design. Quality assessment and data abstraction was guided by a standardized procedure and performed independently by two authors. Data synthesis was in tabular and text form with meta-analysis not being possible due to the discrepancy in methods and measures between the studies.

Early practical experience and the social responsiveness of clinical education: Systematic review

Objectives To find how early experience in clinical and community settings (early experience) affects medical education, and identify strengths and limitations of the available evidence. Design A systematic review rating, by consensus, the strength and importance of outcomes reported in the decade 1992-2001. Data sources Bibliographical databases and journals were searched for publications on the topic, reviewed under the auspices of the recently formed Best Evidence Medical Education (BEME) collaboration. Selection of studies All empirical studies (verifiable, observational data) were included, whatever their design, method, or language of publication. Results Early experience was most commonly provided in community settings, aiming to recruit primary care practitioners for underserved populations. It increased the popularity of primary care residencies, albeit among self selected students. It fostered self awareness and empathic attitudes towards ill people, boosted students' confidence, motivated them, gave them satisfaction, and helped them develop a professional identity. By helping develop interpersonal skills, it made entering clerkships a less stressful experience. Early experience helped students learn about professional roles and responsibilities, healthcare systems, and health needs of a population. It made biomedical, behavioural, and social sciences more relevant and easier to learn. It motivated and rewarded teachers and patients and enriched curriculums. In some countries,junior students provided preventive health care directly to underserved populations. Conclusion Early experience helps medical students learn, helps them develop appropriate attitudes towards their studies and future practice, and orientates medical curriculums towards society's needs. Experimental evidence of its benefit is unlikely to be forthcoming and yet more medical schools are likely to provide it. Effort could usefully be concentrated on evaluating the methods and outcomes of early experience provided within non-experimental research designs, and using that evaluation to improve the quality of curriculums.

Community-based programmes to prevent falls in children: A systematic review

Objective: We systematically reviewed the literature to examine the evidence for the effectiveness of community-based interventions to reduce fall-related injury in children aged 0-16 years. Methods: We performed a comprehensive search of the literature using the following study selection criteria: community-based intervention study; target population was children aged 0-16 years; outcome measure was fall-related injury rates; and either a community control or historical control was used in the study design. Quality assessment and data abstraction were guided by a standardized procedure and performed independently by two authors. Results: Only six studies fitting the inclusion criteria were identified in our search and only two of these used a trial design with a contemporary community control. Neither of the high quality evaluation studies showed an effect from the intervention and while authors of the remaining studies reported effective falls prevention programmes, the pre- and post-intervention design, uncontrolled for background secular trends, makes causal inferences from these studies difficult. Conclusion: There is a paucity of research studies from which evidence regarding the effectiveness of community-based intervention programmes for the prevention of fall-related injury in children could be based.

Community-based programs to promote care seat restraints in children 0-16 years - A systematic review

Study Objective: Community-based models for injury prevention have become an accepted part of the overall injury control strategy. This systematic review of the scientific literature examines the evidence for their effectiveness in reducing injury due to inadequate car seat restraint use in children 0-16 years of age. Methods: A comprehensive search of the literature was performed using the following study selection criteria: community-based intervention study: target population was children aged 0-16 years of age; outcome measure was either injury rates due to motor vehicle crashes or observed changes in child restraint use; and use of community control or historical control in the study design. Quality assessment and data abstraction was guided by a standardized procedure and performed independently by two authors. Data synthesis was in tabular and text form with meta-analysis not being possible due to the discrepancy in methods and measures between the studies. Results: This review found eight studies, that met all the inclusion criteria. In the studies that measured injury outcomes, significant reductions in risk of motor vehicle occupant injury (33-55%) were reported in the study communities. For those studies reporting observed car seat restraint use the community-based programs were successful in increasing toddler restraint use in 1-5 year aged children by up to 11%; child booster seat use in 4-8 year aged children by up to 13%; rear restraint use in children aged 0-15 years by 8%; a 50% increase in restraint use in pre-school aged children in a high-risk community; and a 44% increase in children aged 5-11 years. Conclusion: While this review highlights that there is some evidence to support the effectiveness of community-based programs to promote car restraint use and/or motor vehicle occupant injury, limitations in the evaluation methodologies of the studies requires the results to be interpreted with caution. There is clearly a need for further high quality program evaluation research to develop an evidence base. (C) 2004 Elsevier Ltd. All rights reserved.

Life Cycle Assessment (LCA) Applied to the Design of an Innovative Drying Process for Sewage Sludge

Most adverse environmental impacts result from design decisions made long before manufacturing or usage. In order to prevent this situation, several authors have proposed the application of life cycle assessment (LCA) at the very first phases of the design of a process, a product or a service. The study in this paper presents an innovative thermal drying process for sewage sludge called fry-drying, in which dewatered sludge is directly contacted in the dryer with hot recycled cooking oils (RCO) as the heat medium. Considering the practical difficulties for the disposal of these two wastes, fry-drying presents a potentially convenient method for their combined elimination by incineration of the final fry-dried sludge. An analytical comparison between a conventional drying process and the new proposed fry-drying process is reported, with reference to some environmental impact categories. The results of this study, applied at the earliest stages of the design of the process, assist evaluation of the feasibility of such system compared to a current disposal process for the drying and incineration of sewage sludge.

Study of flow behaviour in a three-product cyclone using computational fluid dynamics

Simplicity in design and minimal floor space requirements render the hydrocyclone the preferred classifier in mineral processing plants. Empirical models have been developed for design and process optimisation but due to the complexity of the flow behaviour in the hydrocyclone these do not provide information on the internal separation mechanisms. To study the interaction of design variables, the flow behaviour needs to be considered, especially when modelling the new three-product cyclone. Computational fluid dynamics (CFD) was used to model the three-product cyclone, in particular the influence of the dual vortex finder arrangement on flow behaviour. From experimental work performed on the UG2 platinum ore, significant differences in the classification performance of the three-product cyclone were noticed with variations in the inner vortex finder length. Because of this simulations were performed for a range of inner vortex finder lengths. Simulations were also conducted on a conventional hydrocyclone of the same size to enable a direct comparison of the flow behaviour between the two cyclone designs. Significantly, high velocities were observed for the three-product cyclone with an inner vortex finder extended deep into the conical section of the cyclone. CFD studies revealed that in the three-product cyclone, a cylindrical shaped air-core is observed similar to conventional hydrocyclones. A constant diameter air-core was observed throughout the inner vortex finder length, while no air-core was present in the annulus. (c) 2006 Elsevier Ltd. All rights reserved.