Fitting genetic models to twin data with binary and ordered categorical responses: A comparison of structural equation modelling and Bayesian hierarchical models

We compare Bayesian methodology utilizing free-ware BUGS (Bayesian Inference Using Gibbs Sampling) with the traditional structural equation modelling approach based on another free-ware package, Mx. Dichotomous and ordinal (three category) twin data were simulated according to different additive genetic and common environment models for phenotypic variation. Practical issues are discussed in using Gibbs sampling as implemented by BUGS to fit subject-specific Bayesian generalized linear models, where the components of variation may be estimated directly. The simulation study (based on 2000 twin pairs) indicated that there is a consistent advantage in using the Bayesian method to detect a correct model under certain specifications of additive genetics and common environmental effects. For binary data, both methods had difficulty in detecting the correct model when the additive genetic effect was low (between 10 and 20%) or of moderate range (between 20 and 40%). Furthermore, neither method could adequately detect a correct model that included a modest common environmental effect (20%) even when the additive genetic effect was large (50%). Power was significantly improved with ordinal data for most scenarios, except for the case of low heritability under a true ACE model. We illustrate and compare both methods using data from 1239 twin pairs over the age of 50 years, who were registered with the Australian National Health and Medical Research Council Twin Registry (ATR) and presented symptoms associated with osteoarthritis occurring in joints of the hand.

Conductivity/microstructure study of a pyrochlore-type ordered phase in the compound Zr0.75Ce0.08Nd0.17O1.92

The compound Zr0.75Ce0.08Nd0.17O1.92 was investigated as part of a much larger electrical conductivity/microstructure study of the systems ZrO2-CeO2-M2O3 (where M=Nd, Sm, ..., Yb) [Solid State Ionics (2002)]. Electrical conductivity measurements performed in air at 800 degreesC showed significant conductivity degradation over a period of 200 h. Investigation of the annealed and as-fired specimens by ATEM revealed the presence of an emerging, ordered pyrochlore-type phase within the Zr0.75Ce0.08Nd0.17O1.92 defect-fluorite solid solution at much lower dopant levels than observed previously for zirconia binary systems. (C) 2002 Elsevier Science B.V. All rights reserved.

Multiple ordered phases in Langmuir-Blodgett films of cadmium arachidate at elevated temperatures

Using synchrotron X-ray grazing incidence diffraction, superlattice structures have been observed to develop in Langmuir-Blodgett films of cadmium arachidate as the temperature is raised. The previously reported superstructure in the stacked lamellae at room temperature changes at about 70 degreesC and there are further changes at about 90 and 103 degreesC before the major phase transition from stacked lamellae to hexagonally packed rods occurs at 107 degreesC (Langmuir 1997, 13, 1602). Between 70 and 103 degreesC there is a 1 x 10 one-dimensional in-plane superstructure, which is commensurate with the local structure and has an interlayer shift along [01] by a distance of b (of the local structure) at lower temperatures, and a further shift at about 90 degreesC. At lower (

Evaluation of a brief child-focused group-based intervention for anxiety-disordered children

This paper presents a pilot study of a brief, group-based, cognitive-behavioural intervention for anxiety-disordered children. Five children (aged 7 to 13 years) diagnosed with a clinically significant anxiety disorder were treated with a recently developed 6-session, child-focused, cognitive-behavioural intervention that was evaluated using multiple measures (including structured diagnostic interview, self-report questionnaires and behaviour rating scales completed by parents) over four follow-up occasions (posttreatment, 3-month follow-up, 6-month follow-up and 12-month follow-up). This trial aimed to (a) evaluate the conclusion suggested by the research of Cobham, Dadds, and Spence (1998) that anxious children with non-anxious parents require a child-focused intervention only in order to demonstrate sustained clinical gains; and (b) to evaluate a new and more cost-effective child-focused cognitive-behavioural intervention. Unfortunately, the return rate of the questionnaires was poor, rendering this data source of questionable value. However, diagnostic interviews (traditionally the gold standard in terms of outcome in this research area) were completed for all children at all follow-up points. Changes in diagnostic status indicated that meaningful treatment-related gains had been achieved and were maintained over the full follow-up period. The results would thus seem to support the principle of participant-intervention matching proposed by Cobham et al. (1998), as well as the utility of the more brief intervention evaluated.

Cyclization of pyrrhocoricin retains structural elements crucial for the antimircobial activity of the native peptide

Pyrrhacoricin is a naturally occurring antimicrobial peptide from the European fire bug Pyrrhocoris apterus. It has submicromolar activity against a range of Gram-negative bacterial strains and has created recent interest as a lead for the development of novel antibiotic compounds. In this study, we have used NMR spectroscopy to determine the solution structures of pyrrhocoricin and a synthetic macrocyclic derivative that has improved in vivo pharmaceutical properties. Native pyrrhocoricin is largely disordered in solution, but there is evidence of a subpopulation with ordered turn regions over residues 2-5, 4-7, and 16-19. The macrocyclic derivative incorporates a nine amino acid linker joining the N- and C-termini, which does not adversely affect the antimicrobial potency but leads to a broader spectrum of activity. The NMR data suggest that the turn conformations in the cyclic derivative are similar to those in the native form, thus implicating them in the biological function. (C) 2004 Wiley Periodicals, Inc.

Sleepiness, sleep-disordered breathing, and accident risk factors in commercial vehicle drivers

Sleep-disordered breathing and excessive sleepiness may be more common in commercial vehicle drivers than in the general population. The relative importance of factors causing excessive sleepiness and accidents in this population remains unclear. We measured the prevalence of excessive sleepiness and sleep-disordered breathing and assessed accident risk factors in 2,342 respondents to a questionnaire distributed to a random sample of 3,268 Australian commercial vehicle drivers and another 161 drivers among 244 invited to undergo polysomnography. More than half (59.6%) of drivers had sleep-disordered breathing and 15.8% had obstructive sleep apnea syndrome. Twenty-four percent of drivers had excessive sleepiness. Increasing sleepiness was related to an increased accident risk. The sleepiest 5% of drivers on the Epworth Sleepiness Scale and Functional Outcomes of Sleep Questionnaire had an in-creased risk of an accident (odds ratio [OR] 1.91, p = 0.02 and OR 2.23, p < 0.01, respectively) and multiple accidents (OR 2.67, p < 0.01 and OR 2.39, p = 0.01), adjusted for established risk factors. There was an increased accident risk with narcotic analgesic use (OR 2.40, p < 0.01) and antihistamine use (OR 3.44, p = 0.04). Chronic excessive sleepiness and sleep-disordered breathing are common in Australian commercial vehicle drivers. Accident risk was related to increasing chronic sleepiness and antihistamine and narcotic analgesic use.

Use of electropalatography in the treatment of disordered articulation following traumatic brain injury: A case study

Electropalatography (EPG) was used as a biofeedback tool in a case study of a 30-year-old male with disordered articulation following traumatic brain injury (TBI). Based on qualitative measures of the participant's intelligibility, improved articulation of the fricatives /s/ and /integral/ were selected as treatment targets. Therapy was administered three times a week for 5 weeks. Results showed that word and sentence intelligibility increased approximately 10%, and error patterns for lingual articulation indicated that fricative -> stop and other fricative errors decreased considerably. EPG measures for /s/ exhibited a significantly more anterior main focus of articulatory contact post therapy. Consonant durations were significantly longer during weeks 3 and 4, and this finding was associated with the emergence of an articulatory contact pattern with a groove rather than complete closure. This articulatory pattern appeared inconsistently and was found to vary across articulations of /s/ but also within a single consonant production. For /integral/, the amount of contact was significantly reduced post therapy and an increase in duration was noted during week 4, similar to that occurring in the production of /s/. Spatial and timing measures were more variable than in normal speakers of English and indicated a general increase in variability across weeks for both /s/ and /integral/. It was concluded that, although the correct fricative patterns appeared only intermittently during production of the consonants, there seemed to be sufficient information for the listener to be able to classify the sound as a fricative. As a part of an intervention program, visual EPG biofeedback therapy would appear to have a definite role in assisting dysarthric speakers exhibiting difficulties with lingual articulation in understanding their errors, learning how to exploit kinesthetic, and acoustic sources of feedback, and how to make appropriate adjustments in tongue articulation to increase the level of speech intelligibility.

Modeling nitrogen adsorption in spherical pores of siliceous materials by density functional theory

Adsorption of nitrogen in spherical pores of FDU-1 silica at 77 K is considered by means of a nonlocal density functional theory (NLDFT) accounting for a disordered structure of pore walls. Pore size distribution analysis of various FDU-1 samples subject to different temperatures of calcination revealed three distinct groups of pores. The principal group of pores is identified as ordered spherical mesopores connected with each other by smaller interconnecting pores and irregular micropores present in the mesopore walls. To account for the entrances (connecting pores) into spherical mesopores, a concept of solid mass distribution with respect to the apparent density was introduced. It is shown that the introduction of the aforementioned distribution was sufficient to quantitatively describe experimental adsorption isotherms over the entire range of relative pressures spanning six decades.

Highly-ordered hybrid organic-inorganic isoporous membranes from polymer modified nanoparticles

atomic force microscopy (AFM); atom transfer radical polymerization (ATRP); block copolymers; self-assembly; silica nanoparticles.

Electrochemical characteristics of ordered mesoporous carbon used as electrode material in Li-ion battery

Ordered mesoporous carbon CMK-5 was comprehensively tested for the first time as electrode materials in lithium ion battery. The surface morphology, pore structure and crystal structure were investigated by Scanning Electronic Microscopy (SEM), N-2 adsorption technique and X-ray diffraction (XRD) respectively. Electrochemical properties of CMK-5 were studied by galvanostatic cycling and cyclic voltammetry, and compared with conventional anode material graphite. Results showed that the reversible capacity of CMK-5 was 525 mAh/g at the third charge-discharge cycle and that CMK-5 was more compatible for quick charge-discharge cycling because of its special mesoporous structure. Of special interest was that the CMK-5 gave no peak on its positive sweep of the cyclic voltammetry, which was different from all the other known anode materials. Besides, X-ray photoelectron spectroscopy (XPS) and XRD were also applied to investigate the charge-discharge characteristics of CMK-5.

Synthesis of ordered nanoporous carbon and its application in Li-ion battery

Ordered nanoporous carbon (ONC) was comprehensively tested for the first time as electrode material in lithium-ion battery. Structure characterization shows the order nanoporous structure and tiny crystallite structure of as-synthesized ONC. The electrochemical properties of this carbon were studied by galvanostatic cycling and cyclic voltammetry. Of special interest is that ONC gave no peak on its positive sweep of the cyclic voltammetry, which was different from other known anode materials. Besides, X-ray photoelectron spectroscopy (XPS) and XRD were also used to investigate the electrochemical characteristics of ONC. (c) 2006 Elsevier Ltd. All rights reserved.

Effect of pore packing defects in 2-D ordered mesoporous carbons on ionic transport

Ordered mesoporous materials show great importance in energy, environmental, and chemical engineering. The diffusion of guest species in mesoporous networks plays an important role in these applications, especially for energy storage, such as supercapacitors based on ordered mesoporous carbons ( OMCs). The ion diffusion behavior in two different 2-D hexagonal OMCs was investigated by using cyclic voltametry and electrochemical impedance spectroscopy. In addition, transmission electron microscopy, small-angle X-ray diffraction, and nitrogen cryosorption methods were used to study the pore structure variations of these two OMCs. It was found that, for the OMC with defective pore channels ( termed as pore packing defects), the gravimetric capacitance was greatly decayed when the voltage scan rate was increased. The experimental results suggest that, for the ion diffusion in 2-D hexagonal OMCs with similar mesopore size distribution, the pore packing defect is a dominant dynamic factor.

Control of ordered structure and morphology of large-pore periodic mesoporous organosilicas by inorganic salt

Highly ordered rodlike periodic mesoporous organosilicas (PMO) were successfully synthesized using 1.2-bis(trimethoxysilyl)ethane as an precursor and triblock copolymer P123 as a template at low acid concentration and in the presence of inorganic salts (KCl). The role of acid and salt as well as the effects of synthesis temperature and reactant mole ratio in the control of morphology and the formation of ordered mesostructure was systematically examined. It was found that the addition of inorganic salt can dramatically expand the range of the synthesis parameters to produce highly ordered PMO structure and improve the quality of PMO materials. The morphology of PMOs was significantly dependent on the induction time for precipitation. The uniform PMO rods can only be synthesized in a narrow range of acid and salt concentrations. The results also show that the optimized salt concentration (I M) and low acidity (0.167 M) were beneficial to the formation of not only highly ordered mesostructure but also rodlike morphology. Increasing acidity resulted in fast hydrolysis reaction and short rod or plate-like particles. Highly ordered rod can also be prepared at low temperature (35 degrees C) with high salt amount (1.5 M) or high temperature (45 degrees C) with low salt amount (0.5 M). Optimum reactant molar composition at 40 degrees C is 0.035P123:8KCl:1.34HCI:444H(2)O:1.0bis(trimethoxysilyl)ethane. Lower or higher SiO2/PI23 ratio led to the formation of uniform meso-macropores or pore-blocking effect. (c) 2005 Elsevier Inc. All rights reserved.