3D reconstruction and quantification of macropores using X-ray computed tomography and image analysis

Axial X-ray Computed tomography (CT) scanning provides a convenient means of recording the three-dimensional form of soil structure. The technique has been used for nearly two decades, but initial development has concentrated on qualitative description of images. More recently, increasing effort has been put into quantifying the geometry and topology of macropores likely to contribute to preferential now in soils. Here we describe a novel technique for tracing connected macropores in the CT scans. After object extraction, three-dimensional mathematical morphological filters are applied to quantify the reconstructed structure. These filters consist of sequences of so-called erosions and/or dilations of a 32-face structuring element to describe object distances and volumes of influence. The tracing and quantification methodologies were tested on a set of undisturbed soil cores collected in a Swiss pre-alpine meadow, where a new earthworm species (Aporrectodea nocturna) was accidentally introduced. Given the reduced number of samples analysed in this study, the results presented only illustrate the potential of the method to reconstruct and quantify macropores. Our results suggest that the introduction of the new species induced very limited chance to the soil structured for example, no difference in total macropore length or mean diameter was observed. However. in the zone colonised by, the new species. individual macropores tended to have a longer average length. be more vertical and be further apart at some depth. Overall, the approach proved well suited to the analysis of the three-dimensional architecture of macropores. It provides a framework for the analysis of complex structures, which are less satisfactorily observed and described using 2D imaging. (C) 2002 Elsevier Science B.V. All rights reserved.

Work domain analysis and sensors II: Pasteurizer II case study

In this paper we use sensor-annotated abstraction hierarchies (Reising & Sanderson, 1996, 2002a,b) to show that unless appropriately instrumented, configural displays designed according to the principles of ecological interface design (EID) might be vulnerable to misinterpretation when sensors become unreliable or are unavailable. Building on foundations established in Reising and Sanderson (2002a) we use a pasteurization process control example to show how sensor-annotated AHs help the analyst determine the impact of different instrumentation engineering policies on a configural display that is part of an ecological interface. Our analyses suggest that configural displays showing higher-order properties of a system are especially vulnerable under some conservative instrumentation configurations. However, sensor-annotated AHs can be used to indicate where corrective instrumentation might be placed. We argue that if EID is to be effectively employed in the design of displays for complex systems, then the information needs of the human operator need to be considered while instrumentation requirements are being formulated. Rasmussen's abstraction hierarchy-and particularly its extension to the analysis of information captured by sensors and derived from sensors-may therefore be a useful adjunct to up-stream instrumentation design. (C) 2002 Elsevier Science Ltd. All rights reserved.

Engaging with theories of dialogue and voice: Using Bakhtin as a framework to understand teaching and learning Indigenous Australian women's performance

In this paper I explore the Indigenous Australian women's performance classroom (hereafter ANTH2120) as a dialectic and discursive space where the location of possibility is opened for female Indigenous performers to enter into a dialogue from and between both non-Indigenous and Indigenous voices. The work of Bakhtin on dialogue serves as a useful standpoint for understanding the multiple speaking positions and texts in the ANTH2120 context. Bakhtin emphasizes performance, history, actuality and the openness of dialogue to provide an important framework for analysing multiple speaking positions and ways of making meaning through dialogue between shifting and differing subjectivities. I begin by briefly critiquing Bakhtin's "dialogic imagination" and consider the application and usefulness of concepts such as dialogism, heteroglossia and the utterance to understanding the ANTH2120 classroom as a polyphonic and discursive space. I then turn to an analysis of dialogue in the ANTH2120 classroom and primarily situate my gaze on an examination of the interactions that took place between the voices of myself as family/teacher/student and senior Yanyuwa women from the r e m o t e N o r t h e r n T e r r i t o r y A b o r i g i n a l c o m m u n i t y o f B o r r o l o o l a as family/performers/teachers. The 2000 and 2001 Yanyuwa women's performance workshops will be used as examples of the way power is constantly shifting in this dialogue to allow particular voices to speak with authority, and for others to remain silent as roles and relationships between myself and the Yanyuwa women change. Conclusions will be drawn regarding how my subject positions and white race privilege affect who speaks, who listens and on whose terms, and further, the efficacy of this pedagogical platform for opening up the location of possibility for Indigenous Australian women to play a powerful part in the construction of knowledges about women's performance traditions.

A uniform white-noise model for fixed-point roundoff errors in digital systems

Fixed-point roundoff noise in digital implementation of linear systems arises due to overflow, quantization of coefficients and input signals, and arithmetical errors. In uniform white-noise models, the last two types of roundoff errors are regarded as uniformly distributed independent random vectors on cubes of suitable size. For input signal quantization errors, the heuristic model is justified by a quantization theorem, which cannot be directly applied to arithmetical errors due to the complicated input-dependence of errors. The complete uniform white-noise model is shown to be valid in the sense of weak convergence of probabilistic measures as the lattice step tends to zero if the matrices of realization of the system in the state space satisfy certain nonresonance conditions and the finite-dimensional distributions of the input signal are absolutely continuous.

Terminally ill cancer patients' wish to hasten death

This exploratory study investigated factors associated with the wish to hasten death among a sample of terminally ill cancer patients. Semi-structured interviews conducted on a total of 72 hospice and home palliative care patients were subjected to qualitative analysis using QSR-NUDIST. The main themes to emerge suggested that patients with a high wish to hasten death had greater concerns with physical symptoms and psychological suffering, perceived themselves to be more of a burden to others, and experienced higher levels of demoralization, while also reporting less confidence in symptom control, fewer social supports, less satisfaction with life experiences and fewer religious beliefs when compared with patients who had a moderate or no wish to hasten death. The implications of these findings will be discussed.

Limitations to global disease control

In October 2000, Australia was declared poliomyelitis-free” by the World Health Organisation. This declaration followed some extensive six years of surveillance of all cases of acute flaccid paralysis, by the Poliomyelitis Expert Surveillance Committee (Centre for Disease Control, Commonwealth Department of Health and Aged Care, Canberra), chaired by the author. There have been seven attempts in the history of the world to eliminate a disease from the earth’s surface. The dramatic failure of five of these, the success of global smallpox eradication, and current successes and difficulties in the case of attempts to eliminate poliomyelitis worldwide, lead one to an analysis of the factors which led both to success and to failure. The global eradication of a specific disease is one of the most important endeavours which the international community can undertake. This audit reviews the details of such approaches; that such might be used as tools for the future.

Association between clinician factors and a patient's wish to hasten death: Terminally ill cancer patients and their doctors

This study investigated the clinical factors associated with a wish to hasten death among patients with advanced cancer receiving palliative care, with a focus on the role of clinician-related factors. Patients were grouped into high- and low-scoring groups on the basis of their wish to hasten death; doctor-patient pairs were formed. Questionnaire data collected from patients and their treating doctors were subjected to multivariate analysis. Significant predictors of a high wish to hasten death in terminally ill patients from among treating clinicians included the clinician's perception of the patient's lower optimism and greater emotional suffering, the patient indicating a wish to hasten death, the doctor willing to assist the patient in hastening death (if requested and legal), and the doctor reporting less training in psychotherapy. When these variables were combined with patient factors identified in a previous study, the model significantly predicted a wish to hasten death with the following variables patient factors: a higher perceived burden on others, higher depressive symptom scores, and lower family cohesion; physician factors: the doctor willing to assist the patient in hastening death (if requested and legal), the doctor's perception of lower levels of optimism and greater emotional distress in the patient, and the doctor having less training in psychotherapy; and the setting of care: recent admission to a hospice. The findings support the multifactorial influences on the wish to hasten death and suggest that the role of the clinician is a vital context within which the wish to hasten death should be considered.

Vaccine trial as “probe” to define the burden of pneumococcal pneumonia disease [Comment]

In today's Lancet, Felicity Cutts and colleagues present their findings on the randomised double-blind placebo controlled trial on the efficacy of a nine-valent pneumococcal conjugate-vaccine (9PCV) against radiologically confirmed pneumonia and invasive pneumococcal disease in children immunised before 12 months of age in The Gambia. The study site is a rural African setting with high child-mortality, a low prevalence of HIV-1 infection in pregnant mothers, and with endemic malaria. The authors report a vaccine efficacy of 37% (95% CI 27–45%) against first-episodes of radiological pneumonia in a per-protocol analysis. Intention-to-treat analysis showed similar results. The investigators also found that the vaccine could significantly reduce the incidence of vaccine-type invasive pneumococcal disease by 77%, by 50% for all-serotype invasive pneumococcal disease, by 15% for all-cause health-facility admissions, and by 16% for overall child mortality.

Unfreezing the frame: Functional fram analysis for journalists and journalism students

This paper presents two case studies that suggest, in different but complementary ways, that the critical tool of frame analysis (Entman, 2002) has a place not only in the analytical environments of critical media research and media studies classes, where it is commonly found, but also in the media-production oriented environments of skills-based journalism training and even the newsroom. The expectations and constraints of both the latter environments, however, necessitate forms of frame analysis that are quick and simple. While commercial pressures mean newsrooms and skills-based journalism-training environments are likely to allow only an oversimplified approach to frame analysis, we argue that even a simple understanding and analysis at the production end could help to shift framing in ways that not only improve the quality and depth of Australasian newspapers' news coverage, but increase reader satisfaction with media output.

Infrared microspectroscopic mapping of the homogeneity of extruded blends: Application to starch/polyester blends

Blends of starch and a biodegradable polyester, produced by an extrusion process, which included a cross-linker/compatibilizer (maleic anhydride) and an initiator (dicumyl peroxide), were studied by infrared (IR) microspectroscopy using an attenuated total reflectance (ATR) objective. Extruded material, which had a diameter of about 3 mm, was sectioned and embedded in epoxy resin prior to IR analysis. Spectra were collected in a grid pattern across the sectioned face of the sample. Measurement of various band parameters from the spectra allowed IR maps to be constructed containing semi-quantitative information about the distribution of blend components. These maps showed the quality of the blend on a microscopic scale and showed how it varied with different concentrations of compatibilizer and initiator. (c) 2005 Elsevier Ltd. All rights reserved.

Issues of robustness and high dimensionality in cluster analysis

Finite mixture models are being increasingly used to model the distributions of a wide variety of random phenomena. While normal mixture models are often used to cluster data sets of continuous multivariate data, a more robust clustering can be obtained by considering the t mixture model-based approach. Mixtures of factor analyzers enable model-based density estimation to be undertaken for high-dimensional data where the number of observations n is very large relative to their dimension p. As the approach using the multivariate normal family of distributions is sensitive to outliers, it is more robust to adopt the multivariate t family for the component error and factor distributions. The computational aspects associated with robustness and high dimensionality in these approaches to cluster analysis are discussed and illustrated.