Adventitious root formation in cuttings of Backhousia citriodora F. Muell 2. Seasonal influences of temperature, rainfall, flowering and auxins on the stock plant

A 2-year study was carried out on established trees at two sites in southeastern Queensland, Australia, to identify environmental factors that influenced rooting of Backhousia citriodora from cuttings. Complex interactions of rainfall events above 20 mm from the preceding month and mean maximum temperature on stock plants resulted in a correlation with rooting success of r = 0.81 and 0.74 for sites at The University Of Queensland, Gatton Campus, and Cedar Glen, respectively. A more detailed investigation under controlled environmental conditions showed that maintaining stock plants at temperatures between 10 and 30degreesC had no direct effect on rooting capacity. However, temperature was correlated with growth, which may have an indirect effect on root formation. In spring floral initiation was found to only delay rooting and had no effect on the final rooting percentage. A series of seasonal experiments demonstrated that application of the auxins indole-3-acetic acid, indole-3-butyric acid and napthaleneacetic acid over a range of concentrations (1000-8000 mug/ml) did not significantly increase rooting compared to the control and there is no practical advantage in applying auxins. Seasonal results and the temperature experiment also suggest that under a glasshouse environment with higher temperatures in winter and an adequate supply of water, B. citriodora cuttings can be successfully rooted over the whole year. (C) 2004 Elsevier B.V. All rights reserved.

Association of cone thermogenesis and volatiles with pollinator specificity in Macrozamia cycads

Cone traits (volatile components and thermogenesis) of three cycad species in the genus Macrozamia were examined for differences related to their specific insect pollinators, the weevil, Tranes spp., or the thrips, Cycadothrips chadwicki. Linalool (>80% of emissions) dominated cone volatile components of M. machinii (Tranes-pollinated) and beta-myrcene was a minor component (

Effects of postharvest methyl jasmonate treatments against Botrytis cinerea on Geraldton waxflower (Chamelaucium uncinatum)

Cut Geraldton waxflower (Chamelaucium uncinatum Schauer) flowers are often infected with Botrytis cinerea. Release of infection from quiescence can cause ethylene production by invaded host tissues and result in flower abscission. Postharvest floral organ abscission is a major problem for the commercial waxflower industry. Methyl jasmonate (MeJA) occurs naturally in plant tissue and has a signalling role in eliciting induced systemic resistance against disease. MeJA treatments have been shown to suppress B. cinerea infecting cut rose flowers. The present experiments investigated the potential of exogenous MeJA treatments for B. cinerea management on harvested waxflower. MeJA treatments of 10 and 100 L liquid MeJA/L of air applied to cv. Purple Pride and 1 L MeJA/L to cv. Mullering Brook gave reductions in disease severity for uninoculated stems. However, concentrations of 100 L MeJA/L applied to Purple Pride in addition to 1 and 10 L MeJA/L applied to Mullering Brook increased the incidence of floral organ fall. Flower abscission upon treatment with MeJA may be due to induced systemic resistance-associated upregulation of ethylene biosynthesis. MeJA treatments had no direct effect on B. cinerea hyphal elongation in vitro. Collectively, these results show that while MeJA treatment may elicit defence in waxflower against Botrytis, the chemical also causes floral organ fall. Thus, exogenous MeJA treatments do not have potential for B. cinerea management on harvested waxflower.

Genotypic variation for cold tolerance during reproductive development in rice: Screening with cold air and cold water

Rice (Oryza sativa L.) plants are susceptible to low temperature during the young microspore stage, which occurs 10-12 days before heading. Low temperature at this time increases spikelet sterility which can cause massive yield loss. Increasing the cold tolerance of cultivars can reduce yield variability in temperate rice-growing environments. Two experiments were conducted in cold air screenings and two were conducted in cold water screenings to examine genotypic variation for cold tolerance, explore flowering traits related to spikelet sterility, and investigate whether the results reflect the level of cold tolerance determined previously in the field. Cold air screenings imposed day/night temperatures of 27 degrees C/13 degrees C, 25 degrees C/15 degrees C and 32 degrees C/25 degrees C following particle initiation until 50% heading, while cold water screenings maintained a relatively constant 19 degrees C. The variation in the commencement of low air temperature treatment did not have an effect on the level of spikelet sterility, indicating that exposure to low temperature during the young microspore stage was more important than the duration of exposure. Spikelet sterility of common cultivars showed a significant correlation between cold air and cold water screenings (r(2) = 0.63, p < 0.01), cold air and field screenings (r(2) = 0.52, p < 0.01) and cold water and field screenings (r(2) = 0.53, p < 0.01), indicating that cold air and cold water can be used for screening genotypes for low temperature tolerance. HSC55, M 103 and Jyoudeki were identified as cold tolerant and Doongara, Sasanishiki and Nipponbare as susceptible cultivars. There was a significant negative relationship between spikelet sterility and both the number of engorged pollen grains per anther and anther area only after imposing cold air and cold water treatment hence, it was concluded that these flowering traits were facultative in nature. In addition, cultivars originating from Australia and California were inefficient at producing filled grain with similar sized anthers containing a similar number of engorged pollen grains as cultivars from other origins. One suggested reason for this poor conversion to filled grain of cultivars from Australia and California may be associated with their small stigma area, particularly when exposed to low temperature conditions. (c) 2006 Elsevier B.V. All rights reserved.

Minimising cold damage during reproductive development among temperate rice genotypes. II. Genotypic variation and flowering traits related to cold tolerance screening

Low temperature during microspore development increases spikelet sterility and reduces grain yield in rice (Oryza sativa L.). The objectives of this study were to determine genotypic variation in spikelet sterility in the field in response to low-temperature and then to examine the use of physio-morphological traits at flowering to screen for cold tolerance. Multiple-sown field experiments were conducted over 4 consecutive years in the rice-growing region of Australia to increase the likelihood of encountering low-temperature during microspore development. More than 50 cultivars of various origins were evaluated, with 7 cultivars common to all 4 years. The average minimum temperature for 9 days during microspore development was used as a covariate in the analysis to compare cultivars at a similar temperature. The low-temperature conditions in Year 4 identified cold-tolerant cultivars such as Hayayuki and HSC55 and susceptible cultivars such as Sasanishiki and Doongara. After low temperature conditions, spikelet sterility was negatively correlated with the number of engorged pollen grains, anther length, anther area, anther width, and stigma area. The number of engorged pollen grains and anther length were found to be facultative traits as their relationships with spikelet sterility were identified only after cold water exposure and did not exist under non-stressed conditions.

KClO3 applications affect Phalaenopsis orchid flowering

Potassium chlorate (KClO3) treatments are known to promote flowering in longan plants. Potential effects of KClO3 on Phalaenopsis orchid flowering were investigated in the present study. However, increasing application concentrations of 2, 4, 8 and 16 mmol/L KClO3 delayed spike emergence by 5, 6, 18 and 26 days, respectively Moreover, they reduced final spike length by 2.1%, 4.0%, 16.2% and 46.1%, respectively. Nonetheless, application of KClO3 at 4 and 8 mmol/L advanced the time to appearance of the first open flower by 13 and 24 days, respectively. Use of 8 mmol/L KClO3 also increased the number of floral buds by 16%. Treatments with KClO3 tended to reduce flower size. Overall, the data suggest that application of KClO3 at an appropriate concentration (e.g. 8 mmol/L) can increase the number of floral buds and advance the time to Phalaenopsis orchid flowering, but may reduce flower size. (c) 2006 Elsevier B.V. All rights reserved.

Modelling broccoli development, yield and quality

Broccoli is a vegetable crop of increasing importance in Australia, particularly in south-east Queensland and farmers need to maintain a regular supply of good quality broccoli to meet the expanding market. A predictive model of ontogeny, incorporating climatic data including frost risk, would enable farmers to predict harvest maturity date and select appropriate cultivar – sowing date combinations. To develop procedures for predicting ontogeny, yield and quality, field studies using three cultivars, ‘Fiesta’, ‘Greenbelt’ and ‘Marathon’, were sown on eight dates from 11 March to 22 May 1997, and grown under natural and extended (16 h) photoperiods at the University of Queensland, Gatton Campus. Cultivar, rather than the environment, mainly determined head quality attributes of head shape and branching angle. Yield and quality were not influenced by photoperiod. A better understanding of genotype and environmental interactions will help farmers optimise yield and quality, by matching cultivars with time of sowing. The estimated base and optimum temperature for broccoli development were 0°C and 20 °C, respectively, and were consistent across cultivars, but thermal time requirements for phenological intervals were cultivar specific. Differences in thermal time requirement from floral initiation to harvest maturity between cultivars were small and of little importance, but differences in thermal time requirement from emergence to floral initiation were large. Sensitivity to photoperiod and solar radiation was low in the three cultivars used. This research has produced models to assist broccoli farmers in crop scheduling and cultivar selection in south-east Queensland.