An evaluation of different models of water recovery in flotation

Water recovery is one of the key parameters in flotation modelling for the purposes of plant design and process control, as it determines the circulating flow and residence time in the individual process units in the plant and has a significant effect on entrainment and froth recovery. This paper reviews some of the water recovery models available in the literature, including both empirical and fundamental models. The selected models are tested using the data obtained from the experimental work conducted in an Outokumpu 3 m(3) tank cell at the Xstrata Mt Isa copper concentrator. It is found that all the models fit the experimental data reasonably well for a given flotation system. However, the empirical models are either unable to distinguish the effect of different cell operating conditions or required to determine the empirical model parameters to be derived in an existing flotation system. The model developed by [Neethling, SJ., Lee, H.T., Cilliers, J.J., 2003, Simple relationships for predicting the recovery of liquid from flowing foams and froths. Minerals Engineering 16, 1123-1130] is based on fundamental understanding of the froth structure and transfer of the water in the froth. It describes the water recovery as a function of the cell operating conditions and the froth properties which can all be determined on-line. Hence, the fundamental model can be used for process control purposes in practice. By incorporating additional models to relate the air recovery and surface bubble size directly to the cell operating conditions, the fundamental model can also be used for prediction purposes. (C) 2005 Elsevier Ltd. All rights reserved.

Anaerobic metabolism of propionate by polyphosphate-accumulating organisms in enhanced biological phosphorus removal systems

Propionate, a carbon substrate abundant in many prefermenters, has been shown in several previous studies to be a more favorable substrate than acetate for enhanced biological phosphorus removal (EBPR). The anaerobic metabolism of propionate by polyphosphate accumulating organisms (PAOs) is studied in this paper. A metabolic model is proposed to characterize the anaerobic biochemical transformations of propionate uptake by PAOs. The model is demonstrated to predict very well the experimental data from a PAO culture enriched in a laboratory-scale reactor with propionate as the sole carbon source. Quantitative fluorescence in-situ hybridization (FISH) analysis shows that Candidatus Accumulibacter phosphatis, the only identified PAO to date, constitute 63% of the bacterial population in this culture. Unlike the anaerobic metabolism of acetate by PAOs, which induces mainly poly-beta-hydroxybutyrate (PHB) production, the major fractions of poly-beta-hydroxyalkanoate (PHA) produced with propionate as the carbon source are poly-beta-hydroxyvalerate (PHV) and poly-beta-hydroxy-2-methylvalerate (PH2MV). PHA formation correlates very well with a selective (or nonrandom) condensation of acetyl-CoA and propionyl-CoA molecules. The maximum specific propionate uptake rate by PAOs found in this study is 0.18 C-mol/C-mol-biomass h, which is very similar to the maximum specific acetate uptake rate reported in literature. The energy required for transporting 1 carbon-mole of propionate across the PAO cell membrane is also determined to be similar to the transportation of 1 carbon-mole of acetate. Furthermore, the experimental results suggest that PAOs possess a similar preference toward acetate and propionate uptake on a carbon-mole basis. (c) 2005 Wiley Periodicals, Inc.

Toposequential effects on water balance and productivity in rainfed lowland rice ecosystem in Southern Laos

In the Mekong region, most paddies in rainfed lowland rice (Oryza sativa L.) lie in a sequence on gentle sloping land, and grain yield (GY) often depends on the toposequence position. There is, however, lack of information on toposequential effects on field water supply in rainfed lowland rice and how that influences GY. A total of eight field experiments were carried out on sandy, coarse-textured soils in Southern Laos (Champassak Province and Savannakhet Province) over three wet seasons (2000-2002). Components of the water balance, including downward and lateral water movement (D and L, respectively), were quantified at three different positions along toposequences (top, middle and bottom). GY, days-to-flower (DTF) and rainfall were measured, and the water productivity (WP) was determined. In most experiments, standing water disappeared first in the top position and gradually in lower positions. This was associated with the observation that when there was standing water in the field, the higher position had larger D in both the provinces and also larger L in Champassak Province. However, in one experiment, water loss appeared later in the higher position, as the result of lower L, apparently due to some water inputs other than rainfall occurring at this position. Despite larger D plus L at the top position, seasonal sum of D and L were not much affected by the toposequence position, as the daily rate of D plus L became minimal when the standing water was lost earlier in the top position. Lower GY was associated with earlier disappearance of standing water from the field. Relatively low GY was expected in the top toposequence position. This was clearly shown in the toposequence of Phonthong, Champassak Province, as the timing of standing water disappearance relative to flowering was earlier in the top position. Variation in GY across the toposequence positions was coupled with the WP variation, and both GY and WP tended to decline with increased DTF. Therefore, variation in productivity of rainfed lowland rice across toposequence positions depends mainly on the field water status around flowering time. (c) 2005 Elsevier B.V. All rights reserved.