Grain coarsening of magnesium alloys by beryllium

A trace of beryllium can lead to dramatic grain coarsening in Mg-Al alloys at normal cooling rates. It is, however, unclear whether this effect applies to aluminium-free magnesium alloys or not. This work shows that a trace of beryllium also causes considerable grain coarsening in Mg-Zn, Mg-Ca, Mg-Ce and Mg-Nd alloys and hinders grain refinement of magnesium alloys by zirconium as well. (C) 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Web-based screening and brief intervention for hazardous drinking: a double-blind randomized controlled trial

Background Strong evidence exists for the efficacy of screening and brief intervention for reducing hazardous drinking. However, problems have been highlighted with respect to its implementation in health-care systems, not least of which is a reluctance of some doctors to discuss alcohol proactively with their patients. Aims To determine the efficacy of a novel web-based screening and brief intervention (e-SBI) to reduce hazardous drinking. Design A double-blind randomized controlled trial. Setting A university student health service. Participants A total of 16 7 students (17-26 years) were recruited in the reception area and completed a 3-minute web-based screen including the Alcohol Use Disorder Identifiation Test (AUDIT) questionnaire. Of these, 112 tested positive, and 104 (52 females) who consented to follow-up were included in the trial. Measurements Drinking frequency, typical occasion quantity, total volume, heavy episode frequency (females > 80 g ethanol, males > 120 g ethanol), number of personal problems, an academic problems score. Intervention Participants were randomized to 10-15 minutes of web-based assessment and personalized feedback on their drinking (intervention, n = 5 1) or to a leaflet-only control group (n = 5 3). Findings Mean baseline AUDIT scores for control and intervention groups were 16.6 (SD = 6.0) and 16.6 (SD = 5.7). At 6 weeks, participants receiving e-SBI reported significantly lower total consumption (geometric mean ratio = 0.74; 9 5 % confidence interval: 0.56-0.96), lower heavy episode frequency (0.63; 0.42-0.92) and fewer personal problems (0.70; 0.54-0.91). At 6 months personal problems remained lower (0.76; 0.60-0.97), although consumption did not differ significantly. At 6 months, academic problems were lower in the intervention group relative to controls (0.72; 0.51-1.02). Conclusions e-SBI reduced hazardous drinking among university students, to an extent similar to that found for practitioner-delivered brief interventions in the general population. e-SBI offers promise as a strategy to reduce alcohol-related harm in a way that is non-intrusive, appealing to the target group, and capable of being incorporated into primary care. Research is required to replicate the findings, to determine the duration of intervention effects, and to investigate the mechanisms by which the intervention operates.

Dynamic and steady-state rheology of Australian honeys at subzero temperatures

The rheology of 10 Australian honeys was investigated at temperatures -15C to 0C by a strain-controlled rheometer. The honeys exhibited Newtonian behavior irrespective of the temperature, and follow the Cox-Merz rule. G/G' and omega are quadratically related, and the crossover frequencies for liquid to solid transformation and relaxation times were obtained. The composition of the honeys correlates well (r(2) > 0.83) with the viscosity, and with 24 7 data sets (Australian and Greek honeys), the following equation was obtained: mu = 1.41 x 10(-17) exp [-1.20M + 0.01F - 0.0G + (18.6 X 10(3)/T)] The viscosity of the honeys showed a strong dependence on temperature, and four models were examined to describe this. The models gave good fits (r(2) > 0.95), but better fits were obtained for the WLF model using T-g of the honeys and mu(g) = 10(11) Pa.s. The WLF model with its universal values poorly predicted the viscosity, and the implications of the measured rheological behaviors of the honeys in their processing and handling are discussed.

Morphological features of interfacial intermetallics and interfacial reaction rate in Al-11Si-2.5Cu-(0.15/0.60)Fe cast alloy/die steel couples

Soldering reactions are commonly observed during high pressure die casting of aluminium alloys, and involve the formation and growth of interfacial intermetallics between the die and the cast alloy. It is generally believed that close to 1% Fe is necessary in the aluminium alloy to reduce soldering. However, the role of iron in the interfacial reaction has not been studied in detail. In this investigation, reaction couples were formed between H13 tool steel substrates and an Al-11Si-2.5Cu melt containing either 0.15 or 0.60% Fe. Examination revealed distinctly different intermetallic layer morphology. The overall growth and chemistry of the reaction layer and the reaction rate measured by the consumption of the substrate were compared for the two alloy melts. It was demonstrated that a higher iron content reduces the rate of interfacial reaction, consistent with an observed thicker compact ( solid) intermetallic layer. Hence, the difference in reaction rate can be explained by a significant reduction in the diffusion flux due to a thicker compact layer. Finally, the mechanism of the growth of a thicker compact layer in the higher iron melt is proposed, based on the phase relations and diffusion both within and near the interfacial reaction zone. (C) 2004 Kluwer Academic Publishers.

Impact of premorbid undernutrition on outcome in stroke patients

Background and Purpose - To assess the prevalence of premorbid undernutrition and its impact on outcomes 1 month after stroke. Methods - The study recruited from consecutive stroke admissions during a 10-month period. Premorbid nutritional status ( using the subjective global assessment [SGA]), premorbid functioning ( modified Rankin scale [MRS]), and stroke severity ( National Institutes of Health Stroke Scale [NIHSS] score) were assessed at admission. The associations between premorbid nutritional status, poor outcome ( defined as MRS greater than or equal to 3), and mortality were examined before and after adjustment for confounding variables, including age, gender, stroke risk factors, stroke severity, and admission serum albumin. Results - Thirty of 185 patients were assessed as having undernutrition at admission. Significant unadjusted associations were observed between undernutrition and poor outcome (odds ratio [OR], 3.4; 95% CI, 1.3 to 8.7; P = 0.01), and mortality (OR, 3.1, 95% CI, 1.3 to 7.7; P = 0.02) at 1 month. NIHSS, age, and premorbid MRS were also significantly associated with poor outcomes. After adjustment for these factors, the effect size of associations remained important but not significant ( poor outcome: OR, 2.4; 95% CI, 0.7 to 9.0, P = 0.18; mortality: OR, 3.2; 95% CI, 1.0 to 10.4, P = 0.05). Conclusions - Premorbid undernutrition, as assessed using the SGA, appears to be an independent predictor of poor stroke outcome. Stroke prevention strategies should target undernutrition in the population at risk for stroke to improve outcomes.

An analysis of the relationship between grain size, solute content, and the potency and number density of nucleant particles

To be able to determine the grain size obtained from the addition of a grain refining master alloy, the relationship between grain size (d), solute content (defined by the growth restriction factor Q), and the potency and number density of nucleant particles needs to be understood. A study was undertaken on aluminium alloys where additions of TiB2 and Ti were made to eight wrought aluminum alloys covering a range of alloying elements and compositions. It was found from analysis of the data that d = a/(3)root pct TiB2 + b/Q. From consideration of the experimental data and from further analysis of previously published data, it is shown that the coefficients a and b relate to characteristics of the nucleant particles added by a grain refiner. The term a is related to the maximum density of active TiB2 nucleant particles within the melt, while b is related to their potency. By using the analysis methodology presented in this article, the performance characteristics of different master alloys were defined and the effects of Zr and Si on the poisoning of grain refinement were illustrated.

Grain refinement efficiency and mechanism of aluminium carbide in Mg-Al alloys

Detailed microscopic examination using optical and electron microscopes suggests that Al4C3, often observed in the central regions of magnesium grains on polished sections, is a potent substrate for primary Mg. Calculations of the crystallographic relationships between magnesium and Al4C3 further support the experimental observations. (c) 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

The properties of CpG islands in the putative promoter regions of human immunoglobulin (Ig) genes

CpG island is a GC-rich motif occurred in gene promoter region, which can play important roles in gene silencing and imprinting. Here, we present a set of discriminant functions that can recognize the structural and compositional features of CpG islands in the putative promoter regions (PPRs) of human and mouse immunoglobulin (Ig) genes. We showed that the PPRs of both human and mouse Ig genes irrespective of gene chromosomal localization are apparently CpG island poor, with a low percentage of the CpG islands overlapped with the transcription start site (TSS). The human Ig genes that have CpG islands in the PPRs show a very narrow range of CpG densities. 47% of the Ig genes fall in the range of 3.5-4 CpGs/100 bp. In contrast, the non-Ig genes examined have a wide range of the density of CpG island, with 10.5% having the density of 8.1-15 CpGs/100 bp. Meantime, five patterns of the CpG distributions within the CpG islands have been classified: Pat A, B, C, D, and E. 21.6% and 10.8% of the Ig genes fall into the Pat B and Pat D groups, respectively, which were significantly higher than the non-Ig genes examined (8.2% and 3.8%). Moreover, the length of CpG islands is shorter in human Ig genes than in non-Ig genes but is much longer than in mouse orthologues. These findings provide a clear picture of non-neutral and nonrandom occurrence of the CpG islands in the PPRs of human and mouse Ig genes, which facilitate rational recommendations regarding their nomenclature. (C) 2005 Elsevier B.V. All rights reserved.

Corrosion of magnesium alloys in commercial engine coolants

A number of magnesium alloys show promise as engine block materials. However, a critical issue for the automotive industry is corrosion of the engine block by the coolant and this could limit the use of magnesium engine blocks. This work assesses the corrosion performance of conventional magnesium alloy AZ91D and a recently developed engine block magnesium alloy AM-SC1 in several commercial coolants. Immersion testing, hydrogen evolution measurement, galvanic current monitoring and the standard ASTM D1384 test were employed to reveal the corrosion performance of the magnesium alloys subjected to the coolants. The results show that the tested commercial coolants are corrosive to the magnesium alloys in terms of general and galvanic corrosion. The two magnesium alloys exhibited slightly different corrosion resistance to the coolants with AZ91D being more corrosion resistant than AM-SC1. The corrosivity varied from coolant to coolant. Generally speaking. an oraganic-acid based long life coolant was less corrosive to the magnesium alloys than a traditional coolant. Among the studied commercial coolants. Toyota long, life coolant appeared to be the most promising one. In addition. it was found that potassium fluoride effectively inhibited corrosion of the magnesium alloys in the studied commercial coolants. Both general and galvanic corrosion rates were significantly decreased by addition of KF, and there were no evident side effects on the other engine block materials, such as copper, solder. brass. steel and aluminium alloys, in terms of their corrosion performance. The ASTM D 1384 test further confirmed these results and suggested that Toyota long life coolant with 1%wt KF addition is a promising coolant for magnesium engine blocks.

Vaccination against fowl cholera with acapsular Pasteurella multocida A : 1

We have previously constructed an acapsular Pasteurella multocida X-73 (serogroup A) mutant strain which was attenuated in virulence for chickens (Chung JY, Wilkie IW, Boyce JD, Townsend KM, Frost AJ, Ghodussi M, Adler B. Role of capsule in the pathogenesis of fowl cholera caused by Pasteurella multocida serogroup A. Infect. Immun. 2001;69:2487-2492). In this study, we have assessed the ability of this acapsular strain (PBA930) to induce protection against wild-type challenge in mice and the natural host chickens. Intramuscular administration of PBA930 to mice stimulated significant protection against X-73 and the heterologous strain P-1059 (A:3), but not against challenge with P-1662 (A:4). No protection was observed when PBA930 was introduced by the intraperitoneal or subcutaneous routes in mice. Significantly, the acapsular strain PBA930 was able to induce protection against challenge with wild type X-73 in chickens. (c) 2004 Elsevier Ltd. All rights reserved.

Guidelines for filming digital camera video clips for the assessment of gait and movement disorders by teleneurology

Digital still cameras capable of filming short video clips are readily available, but the quality of these recordings for telemedicine has not been reported. We performed a blinded study using four commonly available digital cameras. A simulated patient with a hemiplegic gait pattern was filmed by the same videographer in an identical, brightly lit indoor setting. Six neurologists viewed the blinded video clips on their PC and comparisons were made between cameras, between video clips recorded with and without a tripod, and between video clips filmed on high- or low-quality settings. Use of a tripod had a smaller effect than expected, while images taken on a high-quality setting were strongly preferred to those taken on a low-quality setting. Although there was some variability in video quality between selected cameras, all were of sufficient quality to identify physical signs such as gait and tremor. Adequate-quality video clips of movement disorders can be produced with low-cost cameras and transmitted by email for teleneurology purposes.

The effect of admission physiological variables on 30 day outcome after stroke

Introduction. Potentially modifiable physiological variables may influence stroke prognosis but their independence from modifiable factors remains unclear. Methods. Admission physiological measures (blood pressure, heart rate, temperature and blood glucose) and other unmodifiable factors were recorded from patients presenting within 48 hours of stroke. These variables were compared with the outcomes of death and death or dependency at 30 days in multivariate statistical models. Results. In the 186 patients included in the study, age, atrial fibrillation and the National Institutes of Health Stroke Score were identified as unmodifiable factors independently associated with death and death or dependency. After adjusting for these factors, none of the physiological variables were independently associated with death, while only diastolic blood pressure (DBP) >= 90 mmHg was associated with death or dependency at 30 days (p = 0.02). Conclusions. Except for elevated DBP, we found no independent associations between admission physiology and outcome at 30 days in an unselected stroke cohort. Future studies should look for associations in subgroups, or by analysing serial changes in physiology during the early post-stroke period.

How many variables can humans process?

The conceptual complexity of problems was manipulated to probe the limits of human information processing capacity. Participants were asked to interpret graphically displayed statistical interactions. In such problems, all independent variables need to be considered together, so that decomposition into smaller subtasks is constrained, and thus the order of the interaction. directly determines conceptual complexity. As the order of the interaction increases, the number of variables increases. Results showed a significant decline in accuracy and speed of solution from three-way to four-way interactions. Furthermore, performance on a five-way interaction was at chance level. These findings suggest that a structure defined on four variables is at the limit of human processing capacity.