Identifying rate-limiting nodes in large-scale cortical networks for visuospatial processing: an illustration using fMRI

With the advent of functional neuroimaging techniques, in particular functional magnetic resonance imaging (fMRI), we have gained greater insight into the neural correlates of visuospatial function. However, it may not always be easy to identify the cerebral regions most specifically associated with performance on a given task. One approach is to examine the quantitative relationships between regional activation and behavioral performance measures. In the present study, we investigated the functional neuroanatomy of two different visuospatial processing tasks, judgement of line orientation and mental rotation. Twenty-four normal participants were scanned with fMRI using blocked periodic designs for experimental task presentation. Accuracy and reaction time (RT) to each trial of both activation and baseline conditions in each experiment was recorded. Both experiments activated dorsal and ventral visual cortical areas as well as dorsolateral prefrontal cortex. More regionally specific associations with task performance were identified by estimating the association between (sinusoidal) power of functional response and mean RT to the activation condition; a permutation test based on spatial statistics was used for inference. There was significant behavioral-physiological association in right ventral extrastriate cortex for the line orientation task and in bilateral (predominantly right) superior parietal lobule for the mental rotation task. Comparable associations were not found between power of response and RT to the baseline conditions of the tasks. These data suggest that one region in a neurocognitive network may be most strongly associated with behavioral performance and this may be regarded as the computationally least efficient or rate-limiting node of the network.

Change in the rate of shell deposition and shell microstructure in response to shell borers in the abalone Haliotis rubra

Gastropod shells consist of two crystal types of calcium carbonate, an outer, prismatic calcite layer and an inner nacreous layer made of aragonite. In cross-section, the nacre of the nacreous layer appears to have a regular brick-like microstructure composed of thin laminae of aragonite crystals, separated by very thin sheets of protein (Lutz and Rhoads, 1980; Nakahara, 1983). In abalone (Genus, Haliotis) and other gastropods, thin layers of non-lamellar pigmented material occur within the nacre and have been termed alternatively, fine lines, growth rings or growth lines (Shepherd et al., 1995). It has been suggested that these pigmented layers are small, prismatic, calcite layers (Shepherd and Avalos-Borja, 1997; Zaremba et al., 1996) but investigations using a Raman laser in Haliotis rubra show that they contain aragonite rather than calcite (Hawkes et al, 1996). Day and Fleming (1992) suggest that the occurrence of pigmented layers is correlated with regular exogenous cues such as reproduction or temperature changes and indeed in some species, pigmented layers in the shell can be used to age abalone (review: Shepherd and Triantafillos, 1997). However, McShane and Smith (1992) suggest that pigmented layers can occur irregularly and therefore may be unreliable indicators of age.

Measuring the decoherence rate in a semiconductor charge qubit

We describe a method by which the decoherence time of a solid-state qubit may be measured. The qubit is coded in the orbital degree of freedom of a single electron bound to a pair of donor impurities in a semiconductor host. The qubit is manipulated by adiabatically varying an external electric field. We show that by measuring the total probability of a successful qubit rotation as a function of the control field parameters, the decoherence rate may be determined. We estimate various system parameters, including the decoherence rates due to electromagnetic fluctuations and acoustic phonons. We find that, for reasonable physical parameters, the experiment is possible with existing technology. In particular, the use of adiabatic control fields implies that the experiment can be performed with control electronics with a time resolution of tens of nanoseconds.

High speed versus conventional grinding in high removal rate machining of alumina and alumina-titania

High removal rate (up to 16.6 mm(3)/s per mm) grinding of alumina and alumina-titania was investigated with respect to material removal and basic grinding parameters using a resin-bond 160 mu m grit diamond wheel at the speeds of 40 and 160 m/s, respectively. The results show that the material removal for the single-phase polycrystalline alumina and the two-phase alumina-titania composite revealed identical mechanisms of microfracture and grain dislodgement under the grinding conditioned selected. There were no distinct differences in surface roughness and morphology for both materials ground at either conventional or high speed. An increase in material removal rate did not necessarily worsen the surface toughness for the two materials at both speeds. Also the grinding forces for the two ceramics demonstrated similar characteristics at any grinding speeds and specific removal rates. Both normal and tangential grinding forces and their force ratios at the high speed were lower than those at the conventional speed, regardless of removal rates. An increase in specific removal rate caused more rapid increases in normal and tangential forces obtained at the conventional grinding speed than those at the high speed. Furthermore, it is found that the high speed grinding at all the removal rates exerted a great amount of coolant-induced normal forces in grinding zone, which were 4-6 times higher than the pure normal grinding forces. (c) 2004 Elsevier Ltd. All rights reserved.

Pathology reporting of breast cancer: trends in 1989-1999, following the introduction of mammographic screening in Western Australia

Background: A survey of pathology reporting of breast cancer in Western Australia in 1989 highlighted the need for improvement. The current study documents (1) changes in pathology reporting from 1989 to 1999 and (2) changes in patterns of histopathological prognostic indicators for breast cancer following introduction of mammographic screening in 1989. Methods: Data concerning all breast cancer cases reported in Western Australia in 1989, 1994 and 1999 were retrieved using the State Cancer Registry, Hospital Morbidity data system, and pathology laboratory records. Results: Pathology reports improved in quality during the decade surveyed. For invasive carcinoma, tumour size was not recorded in 1.2% of pathology reports in 1999 compared with 16.1% in 1989 (rho<0.001). Corresponding figures for other prognostic factors were: tumour grade 3.3% and 51.6% (rho<0.001), tumour type 0.2% and 4.1% (rho<0.001), vascular invasion 3.7% and 70.9% (rho<0.001), and lymph node status 1.9% and 4.5% (rho=0.023). In 1999, 5.9% of reports were not in a synoptic/checklist format, whereas all reports were descriptive in 1989 (rho<0.001). For the population as a whole, the proportion of invasive carcinomas <1 cm was 20.9% in 1999 compared with 14.5% in 1989 (rho<0.001); for tumours <2 cm the corresponding figures were 65.4% and 59.7% (rho=0.013). In 1999, 30.5% of tumours were histologically well-differentiated compared with 10.6% in 1989 (rho<0.001), and 61.7% were lymph node negative in 1999 compared with 57.1% in 1989 (rho=0.006). Pure ductal carcinoma in situ (DCIS) constituted 10.9% and 7.9% of total cases of breast carcinoma in 1999 and 1989, respectively (rho=0.01). Conclusions: Quality of pathology reporting improved markedly over the period, in parallel with adoption of stanclardised synoptic pathology reports. By 1999, recording of important prognostic information was almost complete. Frequency of favourable prognostic factors generally increased over time, reflecting expected effects of mammographic screening.

Structural and electron self-exchange rate variations in isomeric (hexaamine)cobalt(III/II) complexes

The syntheses and characterisation of the new macrocyclic hexaamine trans-(5(S),7(S),12(R),14(R)-tetramethyl)-1,4,8,11-tetraazacyclotetradecane-6,13-diamine (L-6) and its Co-III complex are reported. The X-ray crystal structural analyses of [CoL6]Cl-2(ClO4) [monoclinic, space group C2/c, a = 16.468(3) Angstrom, b = 9.7156(7) Angstrom, c = 15.070(3) Angstrom, beta = 119.431(8)degrees, Z = 4] and the closely related cis-diamino-substituted macrocyclic complex [CoL2](ClO4)(3) . 2H(2)O (L-2 = cis-6,13-dimethyl-1,4,8,11-tetraazacyclotetradecane-6,13-diamine) [orthorhombic, space group Pna2(1), a = 16.8220(8) Angstrom, b = 10.416(2) Angstrom, c = 14.219(3) Angstrom, Z = 4] reveal significant variations in the observed Co-N bond lengths and coordination geometries, which may be attributed to the trans or cis disposition of the pendent primary amines. The Co-III/II self-exchange electron transfer rate constants for these and other closely related hexaamines have been determined, and variations of some 2 orders of magnitude are found between pairs of trans and cis isomeric Co-III complexes.

Validity of self-reported hysterectomy and tubal sterilisation

Both hysterectomy and tubal sterilisation offer significant protection from ovarian cancer, and the risk of cardiovascular disease in women is lowered after hysterectomy. Since little is known about the accuracy of women's self-reports of these procedures, we assessed their reliability and validity using data obtained in a case-control study of ovarian cancer. There was 100 per cent repeatability for both positive and negative histories of hysterectomy and tubal sterilisation among a small sample of women on reinterview. Verification of surgery was sought against surgeons' or medical records, or if these were unavailable, from randomly selected current general practitioners for 51 cases and 155 controls reporting a hysterectomy and 73 cases and 137 controls reporting a tubal sterilisation. Validation rate for self-reported hysterectomy against medical reports (32 cases, 96 controls) was 96 per cent (95 per cent confidence interval (CI) 91 to 99) and for tubal sterilisation (32 cases, 77 controls) it was 88 per cent (CI 81 to 93), which is likely to be an underestimate. Although findings are based on small numbers of women for whom medical reports could be ascertained, they are consistent with other findings that suggest women have good recall of past histories of hysterectomy and tubal sterilisation; this allows long-term effects of these procedures to be studied with reasonable accuracy from self-reports.