Simulating growth, development, and yield of tillering pearl millet. III. Biomass accumulation and partitioning

Pearl millet landraces from Rajasthan, India, yield significantly less than improved cultivars under optimum growing conditions, but not under stressed conditions. To successfully develop a simulation model for pearl millet, capable of capturing such genotype x environment (G x E) interactions for grain yield, we need to understand the causes of the observed yield interaction. The aim of this paper is to quantify the key parameters that determine the accumulation and partitioning of biomass: the,light extinction coefficient, radiation use efficiency (RUE), pattern of dry matter allocation to the leaf blades, the determination of grain number, and the rate and duration of dry matter accumulation into individual grains. We used data on improved cultivars and landraces, obtained from both published and unpublished sources collected at ICRISAT, Patancheru, India. Where possible, the effects of cultivar and axis (main shoot vs. tillers) on these parameters were analysed, as previous research suggested that G x E interactions for grain yield are associated with differences in tillering habit. Our results indicated there were no cultivar differences in extinction coefficient, RUE, and biomass partitioning before anthesis, and differences between axes in biomass partitioning were negligible. This indicates there was no basis for cultivar differences in the potential grain yield. Landraces, however, produced consistently less grain yield for a given rate of dry matter accumulation at anthesis than did improved cultivars. This was caused by a combination of low grain number and small grain size. The latter was predominantly due to a lower grain growth rate, as genotypic differences in the duration of grain filling were relatively small. Main shoot and tillers also had a similar duration of grain filling. The low grain yield of the landraces was associated with profuse nodal tillering, supporting the hypothesis that grain yield was below the potential yield that could be supported by assimilate availability. We hypothesise this is a survival strategy, which enhances the prospects to escape the effects of stress around anthesis. (C) 2002 E.J. van Oosterom. Published by Elsevier Science B.V. All rights reserved.

Morphology and crystallography of Mg24Y5 precipitate in Mg-Y alloy

Orientation relationships between Mg24Y5 precipitates and matrix in a Mg-Y alloy were accurately determined using Kikuchi line diffraction. The Burgers relationship with habit planes of {10 (1) over bar0}(H) and {31 (4) over bar0}(H) were observed for all precipitates. Compared with the Mg17Al12 precipitate in AZ91, the precipitation hardening effect in this alloy was significantly increased. (C) 2002 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.

Martensite Crystallography - the apparent controversy between the infinitesimal deformation approach and the phenomenological theory of martensitic transformations

The aim of this article is to demonstrate that the apparent controversy between the infinitesimal deformation (ID) approach and the phenomenological theory of martensitic transformations (PTMTs) in predicting the crystallographic characteristics of a martensitic transformation is entirely based on unjustified approximations associated with the way in which the ID calculations are performed. When applied correctly, the ID approach is shown to be absolutely identical to the PTMT. Nevertheless, there may be some advantages in using the ID approach. In particular, it is somewhat simpler than the PTMT; it is based on a physical concept that is easier to understand and, most important, it may provide a tool for investigating some of the features of martensitic transformations that have eluded explanation via the PTMT.

Crystallography of zirconium hydrides in recrystallized Zircaloy-2 fuel cladding lay electron backscatter diffraction

Precipitation morphology and habit planes of the delta-phase Zr hydrides, which were precipitated within the a-phase matrix grains and along the grain boundaries of recrystallized Zircaloy-2 cladding tube, have been examined by electron backscatter diffraction (EBSD). Radially-oriented hydrides, induced by residual tensile stress, precipitated in the outside region of the cladding, and circumferentially-oriented hydrides in the stress-free middle region of the cladding. The most common crystallographic relationship for both types of the hydrides precipitated at the inter- and intra-granular sites was identical at (0001)(alpha) // {111}(delta), with {1017}(alpha) // {111}(delta) being the occasional exception only for the inter-granular radial hydrides. When tensile stress was loaded, the intra-granular hydrides tended to preferentially precipitate in the grains with circumferential basal pole textures. The inter-granular hydrides tended to preferentially precipitate on the grain faces opposite to tensile axis. The change of prioritization in the precipitation sites for the hydrides due to tensile stress could be explained in terms of the relaxation effect of constrained elastic energy on the terminal solid solubility of hydrogen at hydride precipitation.

Population structure of the peridomestic mosquito Ochlerotatus notoscriptus in Australia

Ochlerotatus notoscriptus (Skuse) (Diptera: Culicidae) is the predominant peridomestic mosquito in Australia where it is the primary vector of dog heartworm, Dirofilaria immitis (Leidy), and a potentially important vector of arboviruses (Barmah Forest, Ross River) with geographical variation of vector competence. Although widespread, Oc. notoscriptus has low dispersal ability, so it may have isolated subpopulations. The identification of gene flow barriers may assist in understanding arbovirus epidemiology and disease risk, and for developing control strategies for this species. We investigated the population structure of Oc. notoscriptus from 17 sites around Australia, using up to 31 putative allozyme loci, 11 of which were polymorphic. We investigated the effect of larval environment and adult morphology on genetic variation. At least five subpopulations were found, four in New South Wales (NSW) and one unique to Darwin. Perth samples appear to be a product of recent colonization from the Australian east coast. For NSW sites, a Mantel test revealed an isolation by distance effect and spatial autocorrelation analysis revealed an area of effective gene flow of 67 km, which is high given the limited dispersal ability of this species. No consistent difference was observed between 'urban' and 'sylvan' habitats, which suggests frequent movement between these sites. However, a finer-scaled habitat study at Darwin revealed small but significant allele frequency differences, including for Gpi. No fixed allozyme differences were detected for sex, size, integument colour or the colour of species-diagnostic pale scales on the scutum. The domestic habit of Oc. notoscriptus and assisted dispersal have helped to homogenize this species geographically but population structure is still detectable on several levels associated with geographical variation of vector competence.

Hydroxide carbonates and oxide carbonate hydrate of rare earths grown on glass via a hydrothermal route

Carbonates of rare-earths, specifically hydroxide carbonate or oxide carbonate hydrate, could be prepared on common glass by a hydrothermal process involving thiourea. Examples presented in this paper include LaOHCO3, CeOHCO3 and EU2O(CO3)(2) . H2O structures formed on glass from solutions of thiourea and the relevant rare-earth reactants. The crystal structure and habit on the substrates were dependent on the preparative conditions; the influence of the concentrations of reactants and temperature on the crystal morphologies is illustrated. Second harmonic generation was found to occur in the crystals. (C) 2004 Elsevier B.V. All rights reserved.

Using molecular markers to assess the effect of introgression on quantitative attributes of common bean in the Andean gene pool

Progress in bean breeding programs requires the exploitation of genetic variation that is present among races or through introgression across gene pools of Phaseolus vulgaris L. Of the two major common bean gene pools, the Andean gene pool seems to have a narrow genetic base, with about 10% of the accessions in the CIAT core collection presenting evidence of introgression. The objective of this study was to quantify the degree of spontaneous introgression in a sample of common bean landraces from the Andean gene pool. The effects of introgression on morphological, economic and nutritional attributes were also investigated. Homogeneity analysis was performed on molecular marker data from 426 Andean-type accessions from the primary centres of origin of the CIAT common bean core collection and two check varieties. Quantitative attribute diversity for 15 traits was studied based on the groups found from the cluster analysis of marker prevalence indices computed for each accession. The two-group summary consisted of one group of 58 accessions (14%) with low prevalence indices and another group of 370 accessions (86%) with high prevalence indices. The smaller group occupied the outlying area of points displayed from homogeneity analysis, yet their geographic origin was widely distributed over the Andean region. This group was regarded as introgressed, since its accessions displayed traits that are associated with the Middle American gene pool: high resistance to Andean disease isolates but low resistance to Middle American disease isolates, low seed weight and high scores for all nutrient elements. Genotypes generated by spontaneous introgression can be helpful for breeders to overcome the difficulties in transferring traits between gene pools.

Comments on edge-to-edge matching and the equivalence of the invariant line, Delta g and Moire fringe approaches to the crystallographic features of precipitates

Three apparently distinct and different approaches have been proposed to account for the crystallographic features of diffusion-controlled precipitation. These three models are based on (a) an invariant line in the habit plane, (b) the parallelism of a pair of Deltags that are perpendicular to the habit plane and (c) the parallelism of a pair of Moire fringes that are in turn parallel to the habit plane. The purpose of the present paper is to show that these approaches are in fact absolutely equivalent and that when certain conditions are satisfied they are essentially the same as the recent edge-to-edge matching model put forward by the authors. (C) 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Edge-to-edge matching and its applications - Part I. Application to the simple HCP/BCC system

The edge-to-edge matching crystallographic model has been used to predict all the orientation relationships (OR) between crystals that have simple hexagonal close packed (HCP) and body-centered cubic (BCC) structures. Using the critical values for the interatomic spacing misfit along the matching directions and the cl-value mismatch between matching planes, the model predicted all the four common ORs, namely the Burgers OR, the Potter OR, the Pitsch-Schrader OR and the Rong Dunlop OR, together with the corresponding habit planes. Taking the c(H)/a(H) and a(H)/a(B) ratios as variables, where H and B denote the HCP and BCC structures respectively, the model also predicted the relationship between these variables and the four ORs. These predictions are perfectly consistent with the published experimental results. As was the case in the FCC/BCC system, the edge-to-edge matching model has been shown to be a powerful tool for predicting the crystallographic features of diffusion-controlled phase transformations. (C) 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Edge-to-edge matching and its applications - Part II. Application to Mg-Al, Mg-Y and Mg-Mn alloys

A model for the crystallography and morphology of diffusion-controlled phase transformations - edge-to-edge matching - has been used to predict the orientation relationships (OR) and habit planes of precipitates Mg17Al12 in Mg-Al alloy, Mg24Y5 in Mg-Y alloy and alpha-Mn in Mg-Mn alloy. Based on the crystal structures and lattice parameters only, the model predicts that the possible ORs between Mg17Al12 and Mg matrix are the near Burgers OR, the Potter OR, the Gjonnes-Ostmoe OR and the Crawley OR. In the Mg-Y alloy, the OR between Mg24Y5 precipitates and the Mg matrix is predicted to be the Burgers OR only. The model also predicts that there are no reproducible ORs between alpha-Mn and Mg in the Mg-Mn alloy. Combining the edge-to-edge matching model and W. Zhang's Deltag approach, the habit plane and side facets of the precipitate for each OR can be determined. All the predicted ORs and the corresponding habit planes in Mg-Al and Mg-Y alloys agree very well with the experimental results. (C) 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Genetic analyses of DSM-IV nicotine withdrawal in adult twins

Background. We examined whether there are genetic influences on nicotine withdrawal. and whether there are genetic factors specific to nicotine withdrawal, after controlling for factors responsible for risk of progression beyond experimentation with cigarettes and for quantity smoked (average number of cigarettes per day at peak lifetime use). Method. Epidemiologic and genetic analyses were conducted using telephone diagnostic interview data from Young adult Australian twins reporting any cigarette use (3026 women. 2553 men: mean age 30 years). Results. Genetic analysis of the eight symptoms of DSM-IV nicotine withdrawal suggests heritability is intermediate for most symptoms (26-43%). and Similar in men and women. The exceptions were depressed mood upon withdrawal. which had stronger additive genetic influences in men (53%) compared to worrien (29%). and decreased heart rate. which had low heritability (9%). Although prevalence rates were substantlally lower for DSM-IV nicotine withdrawal syndrome (15-9%), which requires impairment. than for the DSM-IV nicotine dependence withdrawal criterion (43.6%), heritability was similar for both measures: as high as 47%. Genetic modeling of smoking more than 1 or 2 cigarettes lifetime ('progression'). qualtity smoked and nicotine withdrawal found significant genetic overlap across all three components of nicotine use/dependence (genetic correlations = 0.53-0.76). Controlling for factors associated with risk of cigarette smoking beyond experimentation and quantity smoked, evidence for genetic influences specific to nicotine withdrawal (up to 23% of total variance) remained. Conclusions. Our results suggest that at least some individuals become 'hooked' or progress in the smoking habit, in part, because of it vulnerability to nicotine withdrawal.

Adaptive responses of wild mungbean (Vigna radiata ssp sublobata) to photo-thermal environment. II. Growth, biomass, and seed yield

The leaf growth, dry matter production, and seed yield of 11 wild mungbean ( Vigna radiata ssp. sublobata) accessions of diverse geographic origin were observed under natural and artificial photoperiod temperature conditions, to determine the extent to which genotypic differences could be attributed to adaptive responses to photo-thermal environment. Environments included serial sowings in the field in SE Queensland, complemented by artificial photoperiod extension and controlled-environment growth rooms. Photo-thermal environment influenced leaf growth, total dry matter production ( TDM), and seed yield directly, through effects of ( mainly cool) temperature on growth, and indirectly, through effects on phenology. In terms of direct effects, leaf production, leaf expansion, and leaf area were all sensitive to temperature, with implied base temperatures higher than usually observed in cultivated mungbean ( V. radiata ssp. radiata). Genotypic sensitivity to temperature varied systematically with accession provenance and appeared to be of adaptive significance. In terms of the indirect effects of photo-thermal environment, genotypic and environmental effects on TDM were positively related to changes in total growth duration, and harvest index was negatively related to the period from sowing to flowering, similar to cultivated mungbean. However, seed yield was positively related to the duration of reproductive growth, reflecting the indeterminate growth habit of the wild accessions. As a consequence, the wild accessions are more responsive to favourable environments than typically observed in cultivated mungbean, which is determinate in habit. It is suggested that the introduction of the indeterminate trait into mungbean from the wild subspecies would increase the responsiveness of mungbean to favourable environments, analogous to that of black gram ( V. mungo). Although the wild subspecies appeared more sensitive to cool temperature than cultivated mungbean, it may provide a source of tolerance to the warmer temperatures experienced during the wet season in the tropics.

Long-term increase in sunscreen use in an Australian community after a skin cancer prevention trial

Background. Given the public health burden of skin cancer in white populations, an increase in sun protective behavior is needed. In a highrisk community, we assessed long-term Sunscreen use among people who had participated in a randomized trial of daily Sunscreen application for prevention of skin cancer. Methods. In 1992, 1621 residents of the subtropical Australian township of Nambour were randomly allocated to either daily or discretionary sunscreen use until 1996. From 1997 to 2002, we monitored by questionnaires their ongoing sunscreen use. Results. People who had never or irregularly used sunscreen when in summer sun before the trial were more likely (P < 0.0001) to be sustaining regular application especially to their face (20% vs. 11%) and forearms (14% vs. 5%) if they had been allocated to daily, not discretionary, use of sunscreen for 5 years. Conclusions. Regular voluntary sunscreen use for skin cancer prevention can be sustained by sun-sensitive people in the long term. Habit formation appears to be an important goal for sun protection programs among those living, or on vacation, in sunny places. (c) 2005 Elsevier Inc. All rights reserved.

The relationship between chronic cough and paradoxical vocal fold movement: A review of the literature

Chronic cough (CC) and paradoxical vocal fold movement (PVFM) are debilitating conditions. PVFM has been given many labels,(1) including vocal cord dysfunction, Munchausen's stridor, functional inspiratory stridor, nonorganic functional or psychogenic upper airway obstruction, factitious asthma, psychogenic stridor, emotional laryngeal wheezing, and episodic laryngeal dyskinesia. 3 Although CC and PVFM have been considered separate entities in many reports, there is preliminary support for the notion that there may be an underlying link between these two conditions. Speech pathologists have become increasingly involved in the treatment of these patients and therefore need to understand the theoretical background of these disorders, the pathophysiological links between the two, and the impact of voice disorders on these populations. The aim of this article is to review the current literature on CC and PVFM from a speech pathology perspective to provide a model for defining and conceptualizing the disorders and to provide a framework for management and future research.

Understanding the crystallography of the eutectoid microstructure in a Zn-Al alloy using the edge-to-edge matching model

The orientation relationship (OR) between the beta(Zn) phase and the alpha(Al) phase and the corresponding habit planes in a Zn-Al eutectoid alloy were accurately determined using convergent beam Kikuchi line diffraction patterns. In addition to the previously reported OR. [11 (2) over bar0](beta)parallel to[110](alpha), (0002)(beta)parallel to ((1) over bar 11)alpha, two new ORs were observed. They are: [11 (2) over bar0](beta)parallel to [110], ((1) over bar 101)(beta) 0.82 degrees from (002)(alpha) and [(1) over bar 100](beta)parallel to[112](alpha), (0002)(beta) 4.5 degrees from (111)(alpha). These ORs can be explained and understood using the recently developed edge-to-edge matching model. (c) 2006 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.