Population pharmacokinetics of itraconazole and its active metabolite hydroxy-itraconazole in paediatric cystic fibrosis and bone marrow transplant patients

Objective: The objective of the study was to characterise the population pharmacokinetic properties of itraconazole and its active metabolite hydroxyitraconazole in a representative paediatric population of cystic fibrosis and bone marrow transplant (BMT) patients and to identify patient characteristics influencing the pharmacokinetics of itraconazole. The ultimate goals were to determine the relative bioavailability between the two oral formulations (capsules vs oral solution) and to optimise dosing regimens in these patients. Methods: All paediatric patients with cystic fibrosis or patients undergoing BMT at The Royal Children's Hospital, Brisbane, QLD, Australia, who were prescribed oral itraconazole for the treatment of allergic bronchopulmonary aspergillosis (cystic fibrosis patients) or for prophylaxis of any fungal infection (BMT patients) were eligible for the study. Blood samples were taken from the recruited patients as per an empirical sampling design either during hospitalisation or during outpatient clinic visits. ltraconazole and hydroxy-itraconazole plasma concentrations were determined by a validated high-performance liquid chromatography assay with fluorometric detection. A nonlinear mixed-effect modelling approach using the NONMEM software to simultaneously describe the pharmacokinetics of itraconazole and its metabolite. Results: A one-compartment model with first-order absorption described the itraconazole data, and the metabolism of the parent drug to hydroxy-itraconazole was described by a first-order rate constant. The metabolite data also showed one-compartment characteristics with linear elimination. For itraconazole the apparent clearance (CLitraconazole) was 35.5 L/hour, the apparent volume of distribution (V-d(itraconazole)) was 672L, the absorption rate constant for the capsule formulation was 0.0901 h(-1) and for the oral solution formulation was 0.96 h-1. The lag time was estimated to be 19.1 minutes and the relative bioavailability between capsules and oral solution (F-rel) was 0.55. For the metabolite, volume of distribution, V-m/(F (.) f(m)), and clearance, CL/(F (.) fm), were 10.6L and 5.28 L/h, respectively. The influence of total bodyweight was significant, added as a covariate on CLitraconazoie/F and V-d(itraconazole)/F (standardised to a 70kg person) using allometric three-quarter power scaling on CLitraconazole/F, which therefore reflected adult values. The unexplained between-subject variability (coefficient of variation %) was 68.7%, 75.8%, 73.4% and 61.1% for CLitraconazoie/F, Vd(itraconazole)/F, CLm/(F (.) fm) and F-rel, respectively. The correlation between random effects of CLitraconazole and Vd((itraconazole)) was 0.69. Conclusion: The developed population pharmacokinetic model adequately described the pharmacokinetics of itraconazole and its active metabolite, hydroxy-itraconazole, in paediatric patients with either cystic fibrosis or undergoing BMT. More appropriate dosing schedules have been developed for the oral solution and the capsules to secure a minimum therapeutic trough plasma concentration of 0.5 mg/L for these patients.

Sustainable design practitioners: Why they must be at the centre of discussions on sustainable design education

Sustainable design education is vital for engineering students. This is to allow them to meet the challenges both engineering and the wider community will face in the future. This need has not only been mandated by Engineers Australia’s graduate attributes from an Australian perspective, but more widely the issue of sustainability is one of the greatest challenges humanity has ever faced. Engineers need to be at the forefront of this challenge, because we can not only do the greatest good, but have the potential to cause the greatest harm. The biggest question with respect to the education of engineers about sustainable design is what do engineers need to know, and how best to enable this learning. This paper argues that since the entire phenomenon of sustainable design is constantly growing and changing, it is only by looking at practitioners currently trying design sustainably, and their ways of experiencing sustainable design, can we hope to articulate what it is, and therefore what and how we need to teach engineering students. It also argues that to accommodate sustainable design within engineering, we need to go further and transform the engineering profession to enable it to meet the challenges that sustainability presents. © 2005, Australasian Association for Engineering Education

A D-optimal designed population pharmacokinetic study of itraconazole capsules and solution in adults with cystic fibrosis

Background: Oral itraconazole (ITRA) is used for the treatment of allergic bronchopulmonary aspergillosis in patients with cystic fibrosis (CF) because of its antifungal activity against Aspergillus species. ITRA has an active hydroxy-metabolite (OH-ITRA) which has similar antifungal activity. ITRA is a highly lipophilic drug which is available in two different oral formulations, a capsule and an oral solution. It is reported that the oral solution has a 60% higher relative bioavailability. The influence of altered gastric physiology associated with CF on the pharmacokinetics (PK) of ITRA and its metabolite has not been previously evaluated. Objectives: 1) To estimate the population (pop) PK parameters for ITRA and its active metabolite OH-ITRA including relative bioavailability of the parent after administration of the parent by both capsule and solution and 2) to assess the performance of the optimal design. Methods: The study was a cross-over design in which 30 patients received the capsule on the first occasion and 3 days later the solution formulation. The design was constrained to have a maximum of 4 blood samples per occasion for estimation of the popPK of both ITRA and OH-ITRA. The sampling times for the population model were optimized previously using POPT v.2.0.[1] POPT is a series of applications that run under MATLAB and provide an evaluation of the information matrix for a nonlinear mixed effects model given a particular design. In addition it can be used to optimize the design based on evaluation of the determinant of the information matrix. The model details for the design were based on prior information obtained from the literature, which suggested that ITRA may have either linear or non-linear elimination. The optimal sampling times were evaluated to provide information for both competing models for the parent and metabolite and for both capsule and solution simultaneously. Blood samples were assayed by validated HPLC.[2] PopPK modelling was performed using FOCE with interaction under NONMEM, version 5 (level 1.1; GloboMax LLC, Hanover, MD, USA). The PK of ITRA and OH‑ITRA was modelled simultaneously using ADVAN 5. Subsequently three methods were assessed for modelling concentrations less than the LOD (limit of detection). These methods (corresponding to methods 5, 6 & 4 from Beal[3], respectively) were (a) where all values less than LOD were assigned to half of LOD, (b) where the closest missing value that is less than LOD was assigned to half the LOD and all previous (if during absorption) or subsequent (if during elimination) missing samples were deleted, and (c) where the contribution of the expectation of each missing concentration to the likelihood is estimated. The LOD was 0.04 mg/L. The final model evaluation was performed via bootstrap with re-sampling and a visual predictive check. The optimal design and the sampling windows of the study were evaluated for execution errors and for agreement between the observed and predicted standard errors. Dosing regimens were simulated for the capsules and the oral solution to assess their ability to achieve ITRA target trough concentration (Cmin,ss of 0.5-2 mg/L) or a combined Cmin,ss for ITRA and OH-ITRA above 1.5mg/L. Results and Discussion: A total of 241 blood samples were collected and analysed, 94% of them were taken within the defined optimal sampling windows, of which 31% where taken within 5 min of the exact optimal times. Forty six per cent of the ITRA values and 28% of the OH-ITRA values were below LOD. The entire profile after administration of the capsule for five patients was below LOD and therefore the data from this occasion was omitted from estimation. A 2-compartment model with 1st order absorption and elimination best described ITRA PK, with 1st order metabolism of the parent to OH-ITRA. For ITRA the clearance (ClItra/F) was 31.5 L/h; apparent volumes of central and peripheral compartments were 56.7 L and 2090 L, respectively. Absorption rate constants for capsule (kacap) and solution (kasol) were 0.0315 h-1 and 0.125 h-1, respectively. Comparative bioavailability of the capsule was 0.82. There was no evidence of nonlinearity in the popPK of ITRA. No screened covariate significantly improved the fit to the data. The results of the parameter estimates from the final model were comparable between the different methods for accounting for missing data, (M4,5,6)[3] and provided similar parameter estimates. The prospective application of an optimal design was found to be successful. Due to the sampling windows, most of the samples could be collected within the daily hospital routine, but still at times that were near optimal for estimating the popPK parameters. The final model was one of the potential competing models considered in the original design. The asymptotic standard errors provided by NONMEM for the final model and empirical values from bootstrap were similar in magnitude to those predicted from the Fisher Information matrix associated with the D-optimal design. Simulations from the final model showed that the current dosing regimen of 200 mg twice daily (bd) would provide a target Cmin,ss (0.5-2 mg/L) for only 35% of patients when administered as the solution and 31% when administered as capsules. The optimal dosing schedule was 500mg bd for both formulations. The target success for this dosing regimen was 87% for the solution with an NNT=4 compared to capsules. This means, for every 4 patients treated with the solution one additional patient will achieve a target success compared to capsule but at an additional cost of AUD $220 per day. The therapeutic target however is still doubtful and potential risks of these dosing schedules need to be assessed on an individual basis. Conclusion: A model was developed which described the popPK of ITRA and its main active metabolite OH-ITRA in adult CF after administration of both capsule and solution. The relative bioavailability of ITRA from the capsule was 82% that of the solution, but considerably more variable. To incorporate missing data, using the simple Beal method 5 (using half LOD for all samples below LOD) provided comparable results to the more complex but theoretically better Beal method 4 (integration method). The optimal sparse design performed well for estimation of model parameters and provided a good fit to the data.

Clinical measures of obesity and weight loss in men

OBJECTIVES: (?) To determine the relationship between waist circumference and body weight in overweight men both before and after participation in a weight loss program; and (2) to make recommendations for the appropriate use of these measures at various stages of weight toss. DESIGN: Weight and waist circumference measures were taken in two diverse groups of men both before and 1-2y after commencing a men's 'waist loss' program. Regression analyses were used to assess the relationship between weight and waist measures. SUBJECTS: One group of 42 retired Caucasian men from New South Wales, and one group of 45 indigenous men from the Torres Strait region of Northern Australia. RESULTS: There were differences in the relationships of weight and waist circumference before the program and change in weight and change in waist circumference after weight loss. These differences were similar in both groups of men (indigenous men and retired Caucasian men), with a 1 cm waist loss being on average equivalent to about 3/4 kg, but with wide variability, suggesting inter-individual variation in fat losses from different depots. This variation suggests that neither weight nor waist alone is a sufficient measure of fat loss for men. CONCLUSIONS: Weight and waist circumference should both be used at various stages in the clinical situation to assess change in body fat in men involved in obesity reduction.

Delayed onset of electromyographic activity of vastus medialis obliquus relative to vastus lateralis in subjects with patellofemoral pain syndrome

Objective: To determine whether electromyographic (EMG) onsets of vastus medialis obliquus (VMO) and vastus lateralis (VL) are altered in the presence of patellofemoral pain syndrome (PFPS) during the functional task of stair stepping. Design: Cross-sectional. Setting: University laboratory. Patients: Thirty-three subjects with PFPS and 33 asymptomatic controls. Interventions: Subjects ascended and descended a set of stairs-2 steps, each 20-cm high-at usual stair-stepping pace. EMG readings of VMO and VL taken on middle stair during step up (concentric contraction) and step down (eccentric contraction). Main Outcome Measures: Relative difference in onset of surface EMG activity of VMO compared with VL during a stair-stepping task. EMG onsets were determined by using a computer algorithm and were verified visually. Results: In the PFPS population, the EMG onset of VL occurred before that of VMO in both the step up and step down phases of the stair-stepping task (p < .05). In contrast, no such differences occurred in the onsets of EMG activity of VMO and VL in either phase of the task for the control subjects. Conclusion: This finding supports the hypothesized relationship between changes in the timings of activity of the vastimuscles and PFPS. This finding provides theoretical rationale to support physiotherapy treatment commonly used in the management of PFPs.

Suicidal ideation and suicide attempts as predictors of mental health service use

Objective: To examine the extent to which suicidal ideation and suicide attempts are predictive of service use. Design and setting: The National Survey of Mental Health and Wellbeing considered service utilisation in relation to self-reported mental health problems. Service utilisation was inquired of in relation to hospital-based care (including both specialist mental health and general care settings), as well as consultations with a range of health professionals (both specialist and non-specialist mental health professionals, including psychiatrists, psychologists and general practitioners) on an outpatient basis. Participants: Secondary analysis of self-report data from 10 641 randomly selected Australian adults who participated in the National Survey of Mental Health and Wellbeing in 1997. The key predictor variables were reported suicidal ideation and suicide attempts over the past 12 months. Main outcome measures: Use of services for mental health problems (past 12 months). Results: When considered in isolation, individuals reporting suicidal ideation were more likely to make use of at least one type of service for mental health problems than non-suicidal individuals (OR, 17.3; 95% Cl, 13.2-22.6), and individuals reporting suicide attempts were even more likely to do so (OR, 32.3; 95% CI, 9.0-115.4). In the case of suicidal ideation, this effect remained significant after controlling for a range of potential confounders. For suicide attempts, the effect of mental health service use was no longer significant after other variables were taken into account. Conclusions: Suicidal individuals are likely to make use of services, and a high proportion of suicides may be preventable through appropriate healthcare system responses.

Stabilization of native protein fold by intein-mediated covalent cyclization

A mutant version of the N-terminal domain of Escherichia coli DnaB helicase was used as a model system to assess the stabilization against unfolding gained by covalent cyclization. Cyclization was achieved in vivo by formation of an amide bond between the N and C termini with the help of a split mini-intein. Linear and circular proteins were constructed to be identical in amino acid sequence. Mutagenesis of Phe102 to Glu rendered the protein monomeric even at high concentration. A difference in free energy of unfolding, DeltaDeltaG, between circular and linear protein of 2.3(+/-0.5) kcal mol(-1) was measured at 10degreesC by circular dichroism. A theoretical estimate of the difference in conformational entropy of linear and circular random chains in a three-dimensional cubic lattice model predicted DeltaDeltaG = 2.3 kcal mol(-1), suggesting that stabilization by protein cyclization is driven by the reduced conformational entropy of the unfolded state. Amide-proton exchange rates measured by NMR spectroscopy and mass spectrometry showed a uniform, approximately tenfold decrease of the exchange rates of the most slowly exchanging amide protons, demonstrating that cyclization globally decreases the unfolding rate of the protein. The amide proton exchange was found to follow EX1 kinetics at near-neutral pH, in agreement with an unusually slow refolding I measured by stopped-flow circular dichroism. rate of less than 4 min(-1) The linear and circular proteins differed more in their unfolding than in their folding rates. Global unfolding of the N-terminal domain of E. coli DnaB is thus promoted strongly by spatial separation of the N and C termini, whereas their proximity is much less important for folding. (C) 2005 Elsevier Ltd. All rights reserved.

Lattice-dome design using a knowledge-based system approach

In the design of lattice domes, design engineers need expertise in areas such as configuration processing, nonlinear analysis, and optimization. These are extensive numerical, iterative, and lime-consuming processes that are prone to error without an integrated design tool. This article presents the application of a knowledge-based system in solving lattice-dome design problems. An operational prototype knowledge-based system, LADOME, has been developed by employing the combined knowledge representation approach, which uses rules, procedural methods, and an object-oriented blackboard concept. The system's objective is to assist engineers in lattice-dome design by integrating all design tasks into a single computer-aided environment with implementation of the knowledge-based system approach. For system verification, results from design examples are presented.

An integrative approach for studying the etiology of alcoholism and other addictions

Studies of alcoholism etiology often focus on genetic or psy-chosocial approaches, but not both. Greater understanding of the etiology of alcohol, tobacco and other addictions will come from integration of these research traditions. A research approach is outlined to test three models for the etiology of addictions — behavioral undercontrol, pharmacologic vulnerability, negative affect regulation — addressing key questions including (i) mediators of genetic effects, (ii) genotype-environment correlation effects, (iii) genotype x environment interaction effects, (iv) the developmental unfolding of genetic and environmental effects, (v) subtyping including identification of distinct trajectories of substance involvement, (vi) identification of individual genes that contribute to risk, and (vii) the consequences of excessive use. By using coordinated research designs, including prospective assessment of adolescent twins and their siblings and parents; of adult substance dependent and control twins and their MZ and DZ cotwins, the spouses of these pairs, and their adolescent offspring; and of regular families; by selecting for gene-mapping approaches sibships screened for extreme concordance or discordance on quantitative indices of substance use; and by using experimental (drug challenge) as well as survey approaches, a number of key questions concerning addiction etiology can be addressed. We discuss complementary strengths and weaknesses of different sampling strategies, as well as methods to implement such an integrated approach illustrated for the study of alcoholism etiology. A coordinated program of twin and family studies will allow a comprehensive dissection of the interplay of genetic and environmental risk-factors in the etiology of alcoholism and other addictions.

Dietary and supplement treatment of iron deficiency results in improvements in general health and fatigue in Australian women of childbearing age

Objective: To examine the effects of iron deficiency and its treatment by iron supplementation or a high iron diet on fatigue and general health measures in women of childbearing age. Design: Randomised controlled trial to compare supplement and dietary treatment of iron deficiency. Subjects: 44 iron deficient (serum ferritin < 15 mug/L or serum ferritin 15-20 mug/L, plus two of the following: serum iron < 10 mu mol/L, total iron binding capacity > 68 mu mol/L or transferrin saturation < 15%) and 22 iron replete (hemoglobin greater than or equal to 120 g/L and serum ferritin > 20 mug/L) women 18 to 50 years of age were matched for age and parity. Interventions: Iron deficient women were randomly allocated to either iron supplementation or a high iron diet for 12 weeks. Measures of Outcome: Iron deficient and iron replete participants had iron studies performed and completed the Piper Fatigue Scale (PFS) and the SF-36 general health and well-being questionnaire at baseline (TO), following the 12 week intervention (TI) and again after a six-month non-intervention phase (T2). The SF-36 includes measures of physical (PCS) and mental (MCS) health and vitality (VT). Results: MCS and VT scores were lower and PFS scores were higher for iron deficient women (diet and supplement groups) than iron replete women at baseline. Both intervention groups showed similar improvements in MCS, VT and PFS scores during the intervention phase, but mean increases in serum ferritin were greater in the supplement than the diet group. PCS scores were not related to iron status. Conclusions: Treatment of iron deficiency with either supplementation or a high iron diet results in improved mental health and decreased fatigue among women of childbearing age.

Dietary treatment of iron deficiency in women of childbearing age

Background: The Australian Iron Status Advisory Panel advocates dietary intervention as the first treatment option for mild iron deficiency [serum ferritin (SF) = 10-15 mug/L]. However, there appear to be no studies on the efficacy of dietary treatment for iron deficiency. Objective: We compared the effects of iron supplementation and of a high-iron diet on serum ferritin (SF) and hemoglobin in iron-deficient women of childbearing age. Design: Forty-four iron-deficient women (SF < 15 mug/L or SF = 15-20 mug/L plus serum iron < 10 mu mol/L and total-iron-binding capacity > 68 mu mol/L) and 22 iron-replete women (hemoglobin greater than or equal to 120 g/L and SF > 20 mug/L) matched for age and parity categories were enrolled and completed 7-d weighed food records at baseline. The iron-deficient women were randomly allocated to receive iron supplementation (105 mg/d; supplement group) or a high-iron diet (recommended intake of absorbable iron: 2.25 mg/d; diet group) for 12 wk. Hematologic and dietary assessments were repeated at the end of the intervention and again after a 6-mo follow-up. Results: Mean SF in the supplement group increased from 9.0 +/- 3.9 mug/L at baseline to 24.8 +/- 10.0 mug/L after the intervention and remained stable during follow-up (24.2 +/- 9.8 mug/L whereas the diet group had smaller increases during the intervention (8.9 +/- 3.1 to 11.0 +/- 5.9 mug/L) but continued to improve during follow-up (to 15.2 +/- 9.5 mug/L). Mean hemoglobin tended to improve in both intervention groups, but the change was only significant in the supplement group. Conclusions: In iron-deficient women of childbearing age, a high-iron diet produced smaller increases in SF than did iron supplementation but resulted in continued improvements in iron status during a 6-mo follow-up.

Effects of visuospatial tasks on desensitization to emotive memories

Objectives. Intrusive memories of extreme trauma can disrupt a stepwise approach to imaginal exposure. Concurrent tasks that load the visuospatial sketchpad (VSSP) of working memory reduce the vividness of recalled images. This study tested whether relief of distress from competing VSSP tasks during imaginal exposure is at the cost of impaired desensitization. Design. This study examined repeated exposure to emotive memories using 18 unselected undergraduates and a within-subjects design with three exposure conditions (Eye Movement, Visual Noise, Exposure Alone) in random, counterbalanced order. Method. At baseline, participants recalled positive and negative experiences, and rated the vividness and emotiveness of each image. A different positive and negative recollection was then used for each condition. Vividness and emotiveness were rated after each of eight exposure trials. At a post-exposure session 1 week later, participants rated each image without any concurrent task. Results. Consistent with previous research, vividness and distress during imaging were lower during Eye Movements than in Exposure Alone, with passive visual interference giving intermediate results. A reduction in emotional responses from Baseline to Post was of similar size for the three conditions. Conclusion. Visuospatial tasks may offer a temporary response aid for imaginal exposure without affecting desensitization.

Reactions to tick antitoxin serum and the role of atropine in treatment of dogs and cats with tick paralysis caused by Ixodes holocyclus: a pilot survey

Objective To determine the incidence and nature of adverse reactions of dogs and cats to tick antitoxin serum and to re-evaluate the role of atropine in the treatment of tick paralysis. Design A retrospective questionnaire of veterinarians. Procedure Questionnaires were posted to 320 veterinarians in tick-endemic regions of Australia. Questions referred to dogs and cats treated for tick paralysis over a period of three years: the number treated, treatment protocols and adverse systemic reactions to tick antitoxin serum. Ninety completed questionnaires were returned and responses analysed. Results Veterinarians reported that approximately 3% of dogs exhibited adverse reactions immediately following treatment with tick antitoxin serum, Eighteen percent of these reactions were described as anaphylaxis, with the remaining 82% attributed to the Bezold-Jarisch reflex. Six percent of cats treated with tick antitoxin serum reacted adversely and the majority of reactions (63%) were ascribed to the Bezold-Jarisch reflex. Atropine was used routinely by 10% of responding veterinarians in the treatment of dogs and cats with tick paralysis. A similar number of veterinarians used atropine only in selected cases. Most veterinarians (76%) reported that they never used atropine in the treatment of tick paralysis in either dogs or cats. Within the survey population, premedication with atropine reduced the number of Bezold-Jarisch reactions following tick antitoxin administration approximately five-fold in dogs and four-fold in cats. Conclusions Data from this pilot survey indicate that more cats than dogs have adverse systemic reactions to tick antitoxin serum and that the majority of these reactions in both dogs and cats could be related to the Bezold-Jarisch reflex. The number of reactions to tick antitoxin serum in dogs and cats could be significantly reduced by the routine use of atropine prior to administration of tick antitoxin serum.