Resting energy expenditure is lower than predicted in people taking atypical antipsychotic medication

Resting energy expenditure (REE) is lower than predicted in persons taking atypical antipsychotic medication, and weight management is a significant clinical challenge for some of them. However, to date there have been no published guidelines to assist clinicians in choosing appropriate prediction equations to estimate energy expenditure in persons taking atypical antipsychotic medications. The objectives of this study were to measure REE in a group of men taking the atypical antipsychotic clozapine and to determine whether REE can be accurately predicted for this population using previously published regression equations. REE was measured using indirect calorimetry via a ventilated hood on eight men who had completed at least 6 months of treatment with clozapine. Comparisons between measured REE and predicted REE using five different equations were undertaken. The commonly-used Harris-Benedict and Schofield equations systematically overestimated REE. Predictions of REE from other equations were too variable for clinical use. When estimating energy requirements as part of a weight-management program in men who have been taking clozapine for 6 months, predictions of REE from the equations of Harris-Benedict and Schofield should be reduced by 280 kcal/day.

Predictive validity of three ActiGraph energy expenditure equations for children

Purpose: This Study evaluated the predictive validity of three previously published ActiGraph energy expenditure (EE) prediction equations developed for children and adolescents. Methods: A total of 45 healthy children and adolescents (mean age: 13.7 +/- 2.6 yr) completed four 5-min activity trials (normal walking. brisk walking, easy running, and fast running) in ail indoor exercise facility. During each trial, participants were all ActiGraph accelerometer oil the right hip. EE was monitored breath by breath using the Cosmed K4b(2) portable indirect calorimetry system. Differences and associations between measured and predicted EE were assessed using dependent t-tests and Pearson correlations, respectively. Classification accuracy was assessed using percent agreement, sensitivity, specificity, and area under the receiver operating characteristic (ROC) curve, Results: None of the equations accurately predicted mean energy expenditure during each of the four activity trials. Each equation, however, accurately predicted mean EE in at least one activity trial. The Puyau equation accurately predicted EE during slow walking. The Trost equation accurately predicted EE during slow running. The Freedson equation accurately predicted EE during fast running. None of the three equations accurately predicted EE during brisk walking. The equations exhibited fair to excellent classification accuracy with respect to activity intensity. with the Trost equation exhibiting the highest classification accuracy and the Puyau equation exhibiting the lowest. Conclusions: These data suggest that the three accelerometer prediction equations do not accurately predict EE on a minute-by-minute basis in children and adolescents during overground walking and running. The equations maybe, however, for estimating participation in moderate and vigorous activity.

Social inequalities in male mortality, and in male mortality from smoking: indirect estimation from national death rates in England and Wales, Poland, and North America

Background There are substantial social inequalities in adult male mortality in many countries. Smoking is often more prevalent among men of lower social class, education, or income. The contribution of smoking to these social inequalities in mortality remains uncertain. Methods The contribution of smoking to adult mortality in a population can be estimated indirectly from disease-specific death rates in that population (using absolute lung cancer rates to indicate proportions due to smoking of mortality from certain other diseases). We applied these methods to 1996 death rates at ages 35-69 years in men in three different social strata in four countries, based on a total of 0.6 million deaths. The highest and lowest social strata were based on social class (professional vs unskilled manual) in England and Wales, neighbourhood income (top vs bottom quintile) in urban Canada, and completed years of education (more than vs less than 12 years) in the USA and Poland. Results In each country, there was about a two-fold difference between the highest and the lowest social strata in overall risks of dying among men aged 35-69 years (England and Wales 21% vs 43%, USA 20% vs 37%, Canada 21% vs 34%, Poland 26% vs 50%: four-country mean 22% vs 41%, four-country mean absolute difference 19%). More than half of this difference in mortality between the top and bottom social strata involved differences in risks of being killed at age 35-69 years by smoking (England and Wales 4% vs 19%, USA 4% vs 15%, Canada 6% vs 13%, Poland 5% vs 22%: four-country mean 5% vs 17%, four-country mean absolute difference 12%). Smoking-attributed mortality accounted for nearly half of total male mortality in the lowest social stratum of each country. Conclusion In these populations, most, but not all, of the substantial social inequalities in adult male mortality during the 1990s were due to the effects of smoking. Widespread cessation of smoking could eventually halve the absolute differences between these social strata in the risk of premature death.

Specific heat capacity of Australian honeys from 35 to 165C as a function of composition using differential scanning calorimetry

Modulated temperature differential scanning calorimetry was used to investigate the specific heat capacity (C-p) of 10 Australian honeys within the processing and handling temperatures. The values obtained were found to be different from the literature values at certain temperatures, and are not predictable by the additive model. The C-p of each honey exhibited a cubic relationship (P < 0.001) with the temperature (T, C). In addition, the moisture (M, %), fructose (F, %) and glucose (G, %) contents of the honeys influenced their C-p. The following equation (r(2) = 0.92) was proposed for estimating C-p of honey, and is recommended for use in the honey industry and in research: C = 996.7 + 1.4 x 10(-3)T + 5.6 x 10(-5)T(2) - 2.4 x 10(-7)T(3) - 56.5M - 25.8F - 31.0G + 1.5(M * F) + 1.8(M * G) + 0.8(F * G) - 4.6 x 10(-2) (M * F * G).

The effects of caffeine consumption on direct and indirect majority and minority influence

A study is reported that examines the effect of caffeine consumption on majority and minority influence. In a double blind procedure, 72 participants consumed an orange drink, which either contained caffeine (3.5mg per kilogram of body weight) or did not (placebo). After a 40-minute delay, participants read a counter-attitudinal message (antivoluntary euthanasia) endorsed by either a numerical majority or minority. Both direct (message issue, i.e., voluntary euthanasia) and indirect (message issue-related, i.e., abortion) change was assessed by attitude scales completed before and after exposure to the message. In the placebo condition, the findings replicated the predictions of Moscovici's (1980) conversion theory; namely, majorities leading to compliance (direct influence) and minorities leading to conversion (indirect influence). When participants had consumed caffeine, majorities not only led to more direct influence than in the placebo condition but also to indirect influence. Minorities, by contrast, had no impact on either level of influence. The results suggest that moderate levels of caffeine increase systematic processing of the message but the consequences of this vary for each source. When the source is a majority there was increased indirect influence while for a minority there was decreased indirect influence. The results show the need to understand how contextual factors can affect social influence processes.

Evaluation of the indirect measures of rock brittleness and fracture toughness in rock cutting

Performance prediction models for partial face mechanical excavators, when developed in laboratory conditions, depend on relating the results of a set of rock property tests and indices to specific cutting energy (SE) for various rock types. There exist some studies in the literature aiming to correlate the geotechnical properties of intact rocks with the SE, especially for massive and widely jointed rock environments. However, those including direct and/or indirect measures of rock fracture parameters such as rock brittleness and fracture toughness, along with the other rock parameters expressing different aspects of rock behavior under drag tools (picks), are rather limited. With this study, it was aimed to investigate the relationships between the indirect measures of rock brittleness and fracture toughness and the SE depending on the results of a new and two previous linear rock cutting programmes. Relationships between the SE, rock strength parameters, and the rock index tests have also been investigated in this study. Sandstone samples taken from the different fields around Ankara, Turkey were used in the new testing programme. Detailed mineralogical analyses, petrographic studies, and rock mechanics and rock cutting tests were performed on these selected sandstone specimens. The assessment of rock cuttability was based on the SE. Three different brittleness indices (B1, B2, and B4) were calculated for sandstones samples, whereas a toughness index (T-i), being developed by Atkinson et al.(1), was employed to represent the indirect rock fracture toughness. The relationships between the SE and the large amounts of new data obtained from the mineralogical analyses, petrographic studies, rock mechanics, and linear rock cutting tests were evaluated by using bivariate correlation and curve fitting techniques, variance analysis, and Student's t-test. Rock cutting and rock property testing data that came from well-known studies of McFeat-Smith and Fowell(2) and Roxborough and Philips(3) have also been employed in statistical analyses together with the new data. Laboratory tests and subsequent analyses revealed that there were close correlations between the SE and B4 whereas no statistically significant correlation has been found between the SE and T-i. Uniaxial compressive and Brazilian tensile strengths and Shore scleroscope hardness of sandstones also exhibited strong relationships with the SE. NCB cone indenter test had the greatest influence on the SE among the other engineering properties of rocks, confirming the previous studies in rock cutting and mechanical excavation. Therefore, it was recommended to employ easy-to-use index tests of NCB cone indenter and Shore scleroscope in the estimation of laboratory SE of sandstones ranging from very low to high strengths in the absence of a rock cutting rig to measure it until the easy-to-use universal measures of the rock brittleness and especially the rock fracture toughness, being an intrinsic rock property, are developed.