Reliability of electromyographic and torque measures during isometric axial rotation exertions of the trunk

Objective: The aim of the present study was to investigate the between-days reliability of electromyographic (EMG) measurement of 6 bilateral trunk muscles and also the torque output in 3 planes during isometric right and left axial rotation at different exertion levels. Methods: Ten healthy subjects performed isometric right and left axial rotation at 100, 70, 50 and 30% maximum voluntary contractions in two testing sessions at least 7 days apart. EMG amplitude and frequency analyses of the recorded surface EMG signals were performed for rectus abdominis, external oblique, internal oblique, latissimus dorsi, iliocostalis lumborum and multifidus bilaterally. The primary torque in the transverse plane and the coupling torques in sagittal and coronal planes were measured. Results: For both EMG amplitude and frequency values, good (intraclass correlation coefficient, ICC = 0.75-0.89) to excellent (ICC greater than or equal to 0.90) reliability was found in the 6 trunk muscles at different exertion levels during axial rotation. The reliability of both maximal isometric axial rotation torque and coupling torques in sagittal and coronal planes were found to be excellent (ICC greater than or equal to 0.93). Conclusions: Good to excellent reliability of EMG measures of trunk muscles and torque measurements during isometric axial rotation was demonstrated. This provides further confidence of using EMG and triaxial torque assessment as outcome measures in rehabilitation and in the evaluation of the human performance in the work place. (C) 2003 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

Quantitative trends in airborne loads of Celtis sinensis pollen and associations with meteorological variables in a subtropical Australian environment

Celtis sinensis is an introduced plant species to the southeastern region of Queensland that has had a destructive affect on indigenous plant Communities and its pollen has been identified as an allergen Source. Pollen belonging to C. sinensis was sampled during a 5-year (June 1994-May 1999) atmospheric pollen-monitoring programme in Brisbane, Australia, using a Burkard 7-day spore trap. The seasonal incidence of airborne C. sinensis pollen (CsP) in Brisbane occurred over a brief period each year during spring (August-September), while peak concentrations were restricted to the beginning of September. individual CsP seasons were heterogeneous with daily counts within the range 1-10 grains m(-3) on no more than 60 sampling days; however, smaller airborne concentrations of CsP were recorded out of each season. Correlation co-efficients were significant each year for temperature (p0.05) and relative humidity (p>0.05). A significant relationship (r(2)=0.81, p=0.036) was established between the total CsP count and pre-seasonal average maximum temperature; however, periods of precipitation (>2mm) were demonstrated to significantly lower the daily concentrations of CsP from the atmosphere. Given the environmental and clinical significance of CsP and its prevalence in the atmosphere of Brisbane, a Clinical population-based Study is required to further understand the pollen's importance as a seasonal sensitizing source in this region.

An experimental and finite element poroelastic creep response analysis of an intervertebral hydrogel disc model in axial compression

A hydrogel intervertebral disc (lVD) model consisting of an inner nucleus core and an outer anulus ring was manufactured from 30 and 35% by weight Poly(vinyl alcohol) hydrogel (PVA-H) concentrations and subjected to axial compression in between saturated porous endplates at 200 N for 11 h, 30 min. Repeat experiments (n = 4) on different samples (N = 2) show good reproducibility of fluid loss and axial deformation. An axisymmetric nonlinear poroelastic finite element model with variable permeability was developed using commercial finite element software to compare axial deformation and predicted fluid loss with experimental data. The FE predictions indicate differential fluid loss similar to that of biological IVDs, with the nucleus losing more water than the anulus, and there is overall good agreement between experimental and finite element predicted fluid loss. The stress distribution pattern indicates important similarities with the biological lVD that includes stress transference from the nucleus to the anulus upon sustained loading and renders it suitable as a model that can be used in future studies to better understand the role of fluid and stress in biological IVDs. (C) 2005 Springer Science + Business Media, Inc.

Axial Anomaly for Eguchi-Hanson Metrics with Nonzero Total Mass

We compute the Dirac indexes for. the two spin structures kappa(0) and kappa(1) for Eguchi-Hanson metrics with nonzero total mass. It shows that the Dirac indexes do not vanish in general, and axial anomaly exists. When the metric has zero total mass, the Dirac index vanishes for the spin structure no, and no axial anomaly exists in this case.

Client fish ectoparasite loads and cleaner shrimp Urocaridella sp c hunger levels affect cleaning behaviour

Cleaning is a classic example of mutualism and determining the factors that maintain the balance between the costs and benefits for mutualist partners can assist our understanding of how cleaning relationships are maintained. Optimal foraging theory suggests two factors that might help to maintain the relationship between cleaners and their clients: client ectoparasite load and cleaner hunger levels. The ecological relevance and importance of foraging by cleaner fish in marine systems has been demonstrated repeatedly, yet there is little information available on this behaviour in cleaner shrimp. To determine whether cleaner shrimp base their choice of client fish on food patch quality (i.e. client fish ectoparasite load) we offered the yellow-beaked cleaner shrimp Urocaridella sp. c a choice of parasitized and unparasitized rock cods, Cephalopholis cyanostigma. To determine whether cleaner shrimp hunger levels influence cleaning time, we manipulated hunger levels in Urocaridella sp. c and examined their behaviour towards parasitized client fish. Cleaner shrimp preferred parasitized to unparasitized client fish and food-deprived cleaner shrimp cleaned parasitized rock cods more frequently than satiated cleaner shrimp did. Therefore, variations in client fish ectoparasite load and cleaner shrimp hunger level are two factors that affect the balance in this mutualism. Finally, our results meet some of the assumptions of biological market theory, a framework used to understand cooperative interactions, and thus this framework is suggested for future studies on this cleaning system.

Effects of tensioning the lumbar fasciae on segmental stiffness during flexion and extension - Young investigator award winner

Study Design. Biomechanical study of unembalmed human lumbar segments. Objective. To investigate the effects of tensioning the lumbar fasciae ( transversus abdominis [TrA]) aponeurosis) on segment stiffness during flexion and extension. Summary of Background Data. Animal and human studies suggest that TrA may influence intersegmental movement via tension in the middle and posterior layers of lumbar fasciae ( MLF, PLF). Methods. Compressive flexion and extension moments were applied to 17 lumbar segments from 9 unembalmed cadavers with 20 N lateral tension of the TrA aponeurosis during: 1) static tests: load was compared when fascial tension was applied during static compressive loads into flexion-extension; 2) cyclic loading tests: load, axial displacement, and stiffness were compared during repeated compressive loading cycles into flexion-extension. After testing, the PLF was incised to determine the tension transmitted by each layer. Results. At all segments and loads (< 200 N), fascial tension increased resistance to flexion loads by similar to 9.5 N. In 15 of 17, fascial tension decreased resistance to extension by similar to 6.6 N. Fascial tension during cyclic flexion loading decreased axial displacement by 26% at the onset of loading (0 - 2 N) and 2% at 450 N ( 13 of 17). During extension loading, fascial tension increased displacement at the onset of loading ( 10 of 17) by similar to 23% and slightly (1%) decreased displacement at 450 N. Segment stiffness was increased by 6 N/mm in flexion (44% at 25 N) and decreased by 2 N/mm (8% at 25 N) in extension. More than 85% of tension was transmitted through the MLF. Conclusions. Tension on the lumbar fasciae simulating moderate contraction of TrA affects segmental stiffness, particularly toward the neutral zone.

Scaling and non-scaling of muscle activity, kinematics, and dynamics in sit-ups with different degrees of difficulty

The purpose of this study was to investigate how the CNS adjusts motor patterns for variants of a complex axial movement-the situp. Adjustments were induced by changing the support surface contact and mass distribution of the body. Healthy adults performed straight-legged sit-ups, 3 s in duration, with support added to or removed from the lumbar trunk, or with mass added to the head or to the legs. Each of these interventions either increased or decreased the difficulty of the task. The study addressed the extent to which changes in sit-up difficulty are compensated by scaling of muscle activity, kinematics, and dynamics versus the extent to which they are compensated by changing discretely the motor pattern. The analysis of muscle activity, kinematics, and dynamics focused on the first 30-40% of the sit-up-the trunk flexion phase-since this is the most critical part of the movement. Our results demonstrate that, in some respects, sit-up kinematics and dynamics scaled with difficulty, but in other respects, they did not. Muscle activity also scaled, in many respects, but in more difficult sit-ups, abdominal flexor activity decreased instead of increased. Non-scaling changes in these parameters suggest that complex movements, such as the sit-up, may require discrete changes in motor pattern in order to deal with large loads, which challenge the available leverage. (C) 2005 Elsevier Ltd. All rights reserved.

Therapies for axial disease in psoriatic arthritis. A systematic review

Prevalence rates for axial involvement in psoriatic arthritis (PsA) vary from 40% to 74% depending upon criteria for diagnosis. In the absence of trial evidence to assess axial involvement in PsA. the GRAPPA croup, by consensus, has suggested that outcome measures and therapies for axial disease ill ankylosing spondylitis (AS) be used. This systematic review addresses the management of axial disease in PsA, and provides treatment recommendations based oil the AS literature.

Extent and economic effect of heat loads on dairy cattle production in Australia

Objective To investigate the extent of heat load problems, caused by the combination of excessive temperature and humidity, in Holstein-Friesian cows in Australia. Also, to outline how milk production losses and consequent costs from this can be estimated and minimised. Procedures Long-term meteorological data for Australia were analysed to determine the distribution of hot conditions over space and time. Fifteen dairy production regions were identified for higher-resolution data analysis. Both the raw meteorological data and their integration into a temperature-humidity thermal index were compiled onto a computer program. This mapping software displays the distribution of climatic patterns, both Australia-wide and within the selected dairying regions. Graphical displays of the variation in historical records for 200 locations in the 15 dairying regions are also available. As a separate study, production data from research stations, on-farm trials and milk factory records were statistically analysed and correlated with the climatic indices, to estimate production losses due to hot conditions. Results Both milk yields and milk constituents declined with increases in the temperature-humidity index. The onset and rate of this decline are dependent on a number of factors, including location, level of production, adaptation, and management regime. These results have been integrated into a farm-level economic analysis for managers of dairy properties. Conclusion By considering the historical patterns of hot conditions over time and space, along with expected production losses, managers of dairy farms can now conduct an economic evaluation of investment strategies to alleviate heat loads. These strategies include the provision of sprinklers, shade structures, or combinations of these.