Adult attachment, anxiety, and pain self-efficacy as predictors of pain intensity and disability

Pain self-efficacy and anxiety have each been shown to contribute substantially to pain intensity and pain-related disability. Although adult attachment theory has been related separately to chronic pain, anxiety, and self-efficacy, it has not before been investigated with either pain self-efficacy or anxiety in the context of chronic pain. This study investigated the interrelations between these aspects of the chronic pain experience and their relative contributions towards pain intensity and disability. A clinical sample of 152 chronic pain patients participated in this study, completing self-report measures of attachment, self-efficacy, pain intensity, and disability, prior to attending a multidisciplinary pain clinic. Results revealed that fearful and preoccupied (anxious) attachment categories were associated with low pain self-efficacy, while high scores on the attachment dimension of comfort with closeness were linked with high pain self-efficacy, particularly for males. Insecure attachment (whether defined in terms of categories or dimensions) was related to higher levels of anxiety. Pain self-efficacy proved a stronger predictor of pain intensity than did anxiety and was a stronger predictor of disability than pain intensity or anxiety. In addition, comfort with closeness moderated the associations between pain self-efficacy and disability, pain self-efficacy and pain intensity, and anxiety and disability. Together, these findings support the value of adopting an attachment theoretical approach in the context of chronic pain. Treatment considerations and future research directions are considered. (c) 2006 International Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.

Factor structure of the Mood and Anxiety Symptom Questionnaire does not generalize to an anxious/depressed sample

Objective: The tripartite model of anxiety and depression has been proposed as a representation of the structure of anxiety and depression symptoms. The Mood and Anxiety Symptom Questionnaire (MASQ) has been put forwards as a valid measure of the tripartite model of anxiety and depression symptoms. This research set out to examine the factor structure of anxiety and depression symptoms in a clinical sample to assess the MASQ's validity for use in this population. MethodsThe present study uses confirmatory factor analytic methods to examine the psychometric properties of the MASQ in 470 outpatients with anxiety and mood disorder. Results: The results showed that none of the previously reported two-factor, three-factor or five-factor models adequately fit the data, irrespective of whether items or subscales were used as the unit of analysis. Conclusions: It was concluded that the factor structure of the MASQ in a mixed anxiety/depression clinical sample does not support a structure consistent with the tripartite model. This suggests that researchers using the MASQ with anxious/depressed individuals should be mindful of the instrument's psychometric limitations.

Safety behaviors and dysfunctional beliefs about sleep: Testing a cognitive model of the maintenance of insomnia

Objective: Our aim was to determine if insomnia severity, dysfunctional beliefs about sleep, and depression predicted sleep-related safety behaviors. Method: Standard sleep-related measures (such as the Insomnia Severity Index; the Dysfunctional Beliefs About Sleep scale; the Depression, Anxiety, and Stress Scale; and the Sleep-Related Behaviors Questionnaire) were administered. Additionally, 14 days of sleep diary (Pittsburg Sleep Diary) data and actual use of sleep-related behaviors were collected. Results: Regression analysis revealed that dysfunctional beliefs about sleep predicted sleep-related safety behaviors. Insomnia severity did not predict sleep-related safety behaviors. Depression accounted for the greatest amount of unique variance in the prediction of safety behaviors, followed by dysfunctional beliefs. Exploratory analysis revealed that participants with higher levels of depression used more sleep-related behaviors and reported greater dysfunctional beliefs about their sleep. Conclusion: The findings underlie the significant influence that dysfunctional beliefs have on individuals' behaviors. Moreover, the results suggest that depression may need to be considered as an explicit component of cognitive-behavioral models of insomnia. (c) 2006 Elsevier Inc. All rights reserved.

Components of group processes: Have they conributed to the outcome of mood and anxiety diorder patients in a group cognitive-behaviour therapy program

The present study assessed the influence of group processes on clinical outcomes of patients with anxiety and depression following group Cognitive Behavior Therapy (CBT). Five group environment variables were measured: cohesion, leader support, expressiveness, independence, and self-discovery. One hundred and sixty two patients attended a group CBT program and were assessed at pre and post-treatment. Results provided evidence for the effectiveness of group therapy as patients reported significantly lower depression and anxiety at the conclusion of treatment. Expressiveness was the only predictor of post-treatment anxiety, whereas leader support, expressiveness, and independence were significant predictors of post-treatment depression. Overall, findings suggest that the patients benefited from high levels of expressiveness and independence within their therapy group. In contrast, they failed to benefit from high levels of leader support, whereas both group cohesion and self-discovery appeared to be unrelated to outcome

Turbulent Time and Length Scale Measurements in High-Velocity Open Channel Flows

In high-velocity open channel flows, the measurements of air-water flow properties are complicated by the strong interactions between the flow turbulence and the entrained air. In the present study, an advanced signal processing of traditional single- and dual-tip conductivity probe signals is developed to provide further details on the air-water turbulent level, time and length scales. The technique is applied to turbulent open channel flows on a stepped chute conducted in a large-size facility with flow Reynolds numbers ranging from 3.8 E+5 to 7.1 E+5. The air water flow properties presented some basic characteristics that were qualitatively and quantitatively similar to previous skimming flow studies. Some self-similar relationships were observed systematically at both macroscopic and microscopic levels. These included the distributions of void fraction, bubble count rate, interfacial velocity and turbulence level at a macroscopic scale, and the auto- and cross-correlation functions at the microscopic level. New correlation analyses yielded a characterisation of the large eddies advecting the bubbles. Basic results included the integral turbulent length and time scales. The turbulent length scales characterised some measure of the size of large vortical structures advecting air bubbles in the skimming flows, and the data were closely related to the characteristic air-water depth Y90. In the spray region, present results highlighted the existence of an upper spray region for C > 0.95 to 0.97 in which the distributions of droplet chord sizes and integral advection scales presented some marked differences with the rest of the flow.

A comparison of thermal condition between pilot- and full-scale furnaces for studying slagging and fouling propensity in PF boilers

The Australian Coal Industry Research Laboratory (ACIRL) furnace is scaled to simulate slagging and fouling in operating boilers. This requires that the gas and target temperatures, the heat flux, and the flow pattern be the same as those in real boilers. The gas and target temperatures are maintained by insulating the wall and cooling the target respectively. The flow pattern of a small burner cannot be the same as a large furnace. However, this flow pattern is partially compensated for by placing the slagging panels in three vertical locations. The paper develops the models of radiant heat transfer from the flame to the deposits both in pilot-scale and full-scale furnaces. They are used to compare the effective radiant heat transfer of the pilot- and full-scale furnaces. The experimental data both from the pilot- and full-scale furnaces are used to verify the incident heat flux and temperature profiles in the pilot- and full-scale furnaces. The results showed that the thermal condition in the pilot-scale furnace meets the requirements for studying the slagging regarding the gas temperature and the incident heat flux, particularly for the panel #1. The gas temperature in the convective section also meets the requirement for studying the fouling.

Glycogen-accumulating organisms in laboratory-scale and full scale wastewater treatment processes

Laboratory-scale sequencing batch reactors (SBRs) as models for wastewater treatment processes were used to identify glycogen-accumulating organisms (GAOs), which are thought to be responsible for the deterioration of enhanced biological phosphorus removal (EBPR). The SBRs (called Q and T), operated under alternating anaerobic-aerobic conditions typical for EBPR, generated mixed microbial communities (sludges) demonstrating the GAO phenotype. Intracellular glycogen and poly-beta-hydroxyalkanoate (PHA) transformations typical of efficient EBPR occurred but polyphosphate was not bioaccumulated and the sludges contained 1.8% P (sludge Q) and 1.5% P (sludge T). 16S rDNA clone libraries were prepared from DNA extracted from the Q and T sludges. Clone inserts were grouped into operational taxonomic units (OTUs) by restriction fragment length polymorphism banding profiles. OTU representatives were sequenced and phylogenetically analysed. The Q sludge library comprised four OTUs and all six determined sequences were 99.7% identical, forming a cluster in the gamma-Proteobacteria radiation. The T sludge library comprised eight OTUs and the majority of clones were Acidobacteria subphylum 4 (49% of the library) and candidate phylum OPU (39% of the library). One OTU (two clones, of which one was sequenced) was in the gamma-Proteobacteria radiation with 95% sequence identity to the Q sludge clones. Oligonucleotide probes (called GAOQ431 and GAOQ989) were designed from the gamma-Proteobacteria clone sequences for use in fluorescence in situ hybridization (FISH); 92 % of the Q sludge bacteria and 28 % of the T sludge bacteria bound these probes in FISH. FISH and post-FISH chemical staining for PHA were used to determine that bacteria from a novel gamma-Proteobacteria cluster were phenotypically GAOs in one laboratory-scale SBR and two fullscale wastewater treatment plants. It is suggested that the GAOs from the novel cluster in the gamma-Proteobacteria radiation be named 'Candidatus Competibacter phosphatis'.

Combined hydraulic and biological modelling and full-scale validation of SBR process

The biological reactions during the settling and decant periods of Sequencing Batch Reactors (SBRs) are generally ignored as they are not easily measured or described by modelling approaches. However, important processes are taking place, and in particular when the influent is fed into the bottom of the reactor at the same time (one of the main features of the UniFed process), the inclusion of these stages is crucial for accurate process predictions. Due to the vertical stratification of both liquid and solid components, a one-dimensional hydraulic model is combined with a modified ASM2d biological model to allow the prediction of settling velocity, sludge concentration, soluble components and biological processes during the non-mixed periods of the SBR. The model is calibrated on a full-scale UniFed SBR system with tracer breakthrough tests, depth profiles of particulate and soluble compounds and measurements of the key components during the mixed aerobic period. This model is then validated against results from an independent experimental period with considerably different operating parameters. In both cases, the model is able to accurately predict the stratification and most of the biological reactions occurring in the sludge blanket and the supernatant during the non-mixed periods. Together with a correct description of the mixed aerobic period, a good prediction of the overall SBR performance can be achieved.

Gender differences in the relationship between offending, self-harm and depression in adolescence and young adulthood

Criminal offending and poor mental health are both recognised as important social problems warranting prevention and intervention efforts. Although there is some evidence for comorbidity between these problems, little research has examined the causal relationship between offending and mental health, particularly for young people. The present investigation addresses these issues by using data from the Sibling Study, a longitudinal investigation of delinquency as self-reported by 731 adolescents and young adults in south-east Queensland, Australia. The results suggest that for young women, but not men, offending behaviours (including the use of illicit drugs) lead to increases in self-harm and depression. Conversely, poor mental health, as indicated by having low self-esteem, a poor future outlook, and a belief that life is very confusing, does not influence subsequent levels of offending for either sex. The implications for prevention and intervention are discussed, with emphasis on the need for the criminal justice system to provide mental health services to young female offenders.