'Neighbourhood' size, dispersal and density estimates in the prickly forest skink (Gnypetoscincus queenslandiae) using individual genetic and demographic methods

Dispersal, or the amount of dispersion between an individual's birthplace and that of its offspring, is of great importance in population biology, behavioural ecology and conservation, however, obtaining direct estimates from field data on natural populations can be problematic. The prickly forest skink, Gnypetoscincus queenslandiae, is a rainforest endemic skink from the wet tropics of Australia. Because of its log-dwelling habits and lack of definite nesting sites, a demographic estimate of dispersal distance is difficult to obtain. Neighbourhood size, defined as 4 piD sigma (2) (where D is the population density and sigma (2) the mean axial squared parent-offspring dispersal rate), dispersal and density were estimated directly and indirectly for this species using mark-recapture and microsatellite data, respectively, on lizards captured at a local geographical scale of 3 ha. Mark-recapture data gave a dispersal rate of 843 m(2)/generation (assuming a generation time of 6.5 years), a time-scaled density of 13 635 individuals * generation/km(2) and, hence, a neighbourhood size of 144 individuals. A genetic method based on the multilocus (10 loci) microsatellite genotypes of individuals and their geographical location indicated that there is a significant isolation by distance pattern, and gave a neighbourhood size of 69 individuals, with a 95% confidence interval between 48 and 184. This translates into a dispersal rate of 404 m(2)/generation when using the mark-recapture density estimation, or an estimate of time-scaled population density of 6520 individuals * generation/km(2) when using the mark-recapture dispersal rate estimate. The relationship between the two categories of neighbourhood size, dispersal and density estimates and reasons for any disparities are discussed.

Surface diffusion of hydrocarbons in activated carbon: Comparison between constant molar flow, differential permeation and differential adsorption bed methods

This paper presents the comparison of surface diffusivities of hydrocarbons in activated carbon. The surface diffusivities are obtained from the analysis of kinetic data collected using three different kinetics methods- the constant molar flow, the differential adsorption bed and the differential permeation methods. In general the values of surface diffusivity obtained by these methods agree with each other, and it is found that the surface diffusivity increases very fast with loading. Such a fast increase can not be accounted for by a thermodynamic Darken factor, and the surface heterogeneity only partially accounts for the fast rise of surface diffusivity versus loading. Surface diffusivities of methane, ethane, propane, n-butane, n-hexane, benzene and ethanol on activated carbon are reported in this paper.

New methods for the assessment of in vitro and in vivo stress cracking in biomedical polyurethanes

This article describes a new test method for the assessment of the severity of environmental stress cracking of biomedical polyurethanes in a manner that minimizes the degree of subjectivity involved. The effect of applied strain and acetone pre-treatment on degradation of Pellethane 2363 80A and Pellethane 2363 55D polyurethanes under in vitro and in vivo conditions is studied. The results are presented using a magnification-weighted image rating system that allows the semi-quantitative rating of degradation based on distribution and severity of surface damage. Devices for applying controlled strain to both flat sheet and tubing samples are described. The new rating system consistently discriminated between. the effects of acetone pre-treatments, strain and exposure times in both in vitro and in vivo experiments. As expected, P80A underwent considerable stress cracking compared with P55D. P80A produced similar stress crack ratings in both in vivo and in vitro experiments, however P55D performed worse under in vitro conditions compared with in vivo. This result indicated that care must be taken when interpreting in vitro results in the absence of in vivo data. (C) 2001 Elsevier Science Ltd. All rights reserved.

Single institution outcomes of treatment of severe aplastic anaemia

Background: In severe aplastic anaemia, the treatment of choice for young patients with a human leucocyte antigen-matched sibling is now established as allogeneic bone marrow transplantation (BMT). In older patients and in those without a matched sibling donor, immunosuppressive therapy is the usual first option. 'Alternative' marrow donors are emerging as an option for those without a matched sibling donor. Aims: To review 10 years of local experience in treating severe aplastic anaemia with BMT and immunosuppressive therapy with emphasis on long-term outcomes. Methods: A retrospective analysis was performed of all patients with severe aplastic anaemia presenting to the Royal Brisbane and Royal Children's Hos- pitals between 1989 and 1999. Data were abstracted regarding patient demographics, pretreatment characteristics and outcome measures, including response rates, overall survival and long-term complications. Results: Twenty-seven consecutive patients were identified, 12 treated with immunosuppression alone and 15 with BMT. In these two groups, transfusion independence was attained in 25% and 100%, respectively, with overall survival being 36% and 100%, respectively. Those treated with immunosuppression were significantly older (median 41.5 versus 22 years, P = 0.008). Long-term survivors of either treatment had extremely low morbidity. Three patients carried pregnancies to term post-transplant. Three patients received alternative donor BMT with correspondingly excellent survival. Conclusions: Patients treated with allogeneic BMT for severe aplastic anaemia enjoyed extremely good long-term survival and minimal morbidity. Patients treated with immunosuppressive therapy had a poorer outcome reflecting their older age and different usage of therapies over the past decade. Optimal treatment strategies for severe aplastic anaemia remain to be determined.

Child-Pugh class, nutritional indicators and early liver transplant outcomes

Background/Aims: Patients with chronic liver disease undergoing liver transplantation have reduced body fat and muscle mass. The extent to which nutritional indicators and Child-Pugh class are predictive of postoperative outcome in adults is unclear. The aims of this study were to determine in adult patients undergoing transplant 1) the influence of preoperative Child-Pugh class and nutritional indicators on early transplant outcomes and one-year survival, 2) the relationship between nutritional indicators and Child-Pugh class and disease type. This study included 80 patients (1990-1994). Methodology: The nutritional indicators utilized were grip strength, triceps skinfold thickness and uncorrected mid-arm muscle area. Measured outcomes were ventilator time, intensive care stay, postoperative hospital stay and one-year survival. Results: Early morbidity was determined in survivors. Child-Pugh class C patients required longer ventilation and spent more time in the intensive care unit than Child-Pugh classes A and B. No significant relationships were found length of hospital stay. Relationships between the nutritional indicators (when controlled for Child-Pugh class) and early morbidity could not be determined due;to insufficient data. No relationship was established between one-year survival and Child-Pugh class or the nutritional indicators. Grip strength and mid-arm muscle area were lower in the patients in Child-Pugh:classes B and C. Parenchymal liver disease was associated with lower grip strength and mid-arm muscle area when compared to cholestatic disease. Conclusions: Child-Pugh class C is associated with greater early postoperative morbidity. Advanced Child-Pugh class is also associated with diminished muscle status and parenchymal disease.

Broadsheet - Dendritic cells and their emerging clinical applications

Dendritic cells (DC) are now recognised as a unique leukocyte type, consisting of two or more subsets. The origins and functional inter-relationships of these cells are the subject of intense basic scientific investigation. They play important roles in initiating and directing immune responses, defending the host from pathogens and maintaining self tolerance. Fundamental studies are defining new molecules and mechanisms associated with DC function. The first methods for counting these rare blood cell populations are already providing interesting new clinical data. Indeed, abnormal DC function may contribute to deficiencies in the immune response against malignancies. Phase I trial data suggests that DC-based cancer vaccination protocols may contribute an important new biological approach to cancer therapy. Manipulation of DC to facilitate allogeneic transplantation and even to manage autoimmune disease are likely developments.

Integrating technology to improve the efficiency of qualitative data analysis - A note on methods

Qualitative data analysis (QDA) is often a time-consuming and laborious process usually involving the management of large quantities of textual data. Recently developed computer programs offer great advances in the efficiency of the processes of QDA. In this paper we report on an innovative use of a combination of extant computer software technologies to further enhance and simplify QDA. Used in appropriate circumstances, we believe that this innovation greatly enhances the speed with which theoretical and descriptive ideas can be abstracted from rich, complex, and chaotic qualitative data. © 2001 Human Sciences Press, Inc.

Identifying the origin of single corneal cells by DNA fingerprinting - Part I - Implications for corneal limbal allografting

Purpose. To demonstrate that the combination of impression cytology and single cell DNA fingerprinting represents a powerful tool that is suitable for detecting transplanted cells after corneal limbal allografting. Methods, Fifty single cells were obtained by corneal impression cytology from 12 patients undergoing cataract surgery. Individual cells were isolated from samples by micromanipulation. Polymerase chain reaction and short tandem repeat profiling was used to obtain forensic standard DNA fingerprints from single cells. Blood samples taken at the time of impression cytology provided control fingerprints. Results, informative DNA fingerprints were obtained from all corneal samples and 66% (33 of 50 cells) of isolated single cells, Of all fingerprints obtained, most (91%, 30 of 33 fingerprints) corneal fingerprints matched corresponding blond sample fingerprints. At least one corneal fingerprint matched the corresponding blood sample fingerprint in 83% (10 of 12 patients) of the patients in the study, Conclusions. This extremely specific single cell DNA fingerprinting system permits accurate identification of individual corneal epithelial cells, allowing very reliable determination of their origin, which will enable host and donor cells to be distinguished from each other after keratolimbal allografting procedures. even if the host and donor are the same sex or siblings. These DNA fingerprinting methods allow assessment of quality and quantity of donor cell survival, as well as survival time. The extreme sensitivity and accuracy of the technique means that should contamination occur, it would be identified, thus ensuring meaningful results.

Quantification of sulfur and sulfur-containing compounds in wastewaters by means of a combination of liquid chromatographic methods

Low-micromolar concentrations of sulfite, thiosulfate and sulfide, present in synthetic wastewater or anaerobic digester effluent, were quantified by means of derivatization with monobromobimane, followed by HPLC separation with fluorescence detection. The concentration of elemental sulfur was determined, after its extraction with chloroform from the derivatized sample, by HPLC with UV detection. Recoveries of sulfide (both matrices), and of thiosulfate and sulfite (synthetic wastewater) were between 98 and 103%. The in-run RSDs on separate derivatizations were 13 and 19% for sulfite (two tests), between 1.5 and 6.6% for thiosulfate (two tests) and between 4.1 and 7.7% for sulfide (three tests). Response factors for derivatives of sulfide and thiosulfate, but not sulfite, were steady over a 13-month period during which 730 samples were analysed. Dithionate and tetrathionate did not seem to be detectable with this method. The distinctness of the elemental sulfur and the derivatizing-agent peaks was improved considerably by detecting elution at 297 instead of 263 nm. (C) 2002 Elsevier Science B.V. All rights reserved.

Modern scientific methods and their potential in wastewater science and technology

Application of novel analytical and investigative methods such as fluorescence in situ hybridization, confocal laser scanning microscopy (CLSM), microelectrodes and advanced numerical simulation has led to new insights into micro-and macroscopic processes in bioreactors. However, the question is still open whether or not these new findings and the subsequent gain of knowledge are of significant practical relevance and if so, where and how. To find suitable answers it is necessary for engineers to know what can be expected by applying these modern analytical tools. Similarly, scientists could benefit significantly from an intensive dialogue with engineers in order to find out about practical problems and conditions existing in wastewater treatment systems. In this paper, an attempt is made to help bridge the gap between science and engineering in biological wastewater treatment. We provide an overview of recently developed methods in microbiology and in mathematical modeling and numerical simulation. A questionnaire is presented which may help generate a platform from which further technical and scientific developments can be accomplished. Both the paper and the questionnaire are aimed at encouraging scientists and engineers to enter into an intensive, mutually beneficial dialogue. (C) 2002 Elsevier Science Ltd. All rights reserved.

Mathematical methods for spatially cohesive reserve design

The problem of designing spatially cohesive nature reserve systems that meet biodiversity objectives is formulated as a nonlinear integer programming problem. The multiobjective function minimises a combination of boundary length, area and failed representation of the biological attributes we are trying to conserve. The task is to reserve a subset of sites that best meet this objective. We use data on the distribution of habitats in the Northern Territory, Australia, to show how simulated annealing and a greedy heuristic algorithm can be used to generate good solutions to such large reserve design problems, and to compare the effectiveness of these methods.

A simulated annealing algorithm for finding consensus sequences

Motivation: A consensus sequence for a family of related sequences is, as the name suggests, a sequence that captures the features common to most members of the family. Consensus sequences are important in various DNA sequencing applications and are a convenient way to characterize a family of molecules. Results: This paper describes a new algorithm for finding a consensus sequence, using the popular optimization method known as simulated annealing. Unlike the conventional approach of finding a consensus sequence by first forming a multiple sequence alignment, this algorithm searches for a sequence that minimises the sum of pairwise distances to each of the input sequences. The resulting consensus sequence can then be used to induce a multiple sequence alignment. The time required by the algorithm scales linearly with the number of input sequences and quadratically with the length of the consensus sequence. We present results demonstrating the high quality of the consensus sequences and alignments produced by the new algorithm. For comparison, we also present similar results obtained using ClustalW. The new algorithm outperforms ClustalW in many cases.

Tree use, diet and home range of the koala (Phascolarctos cinereus) at Blair Athol, central Queensland

Free-ranging koalas (Phascolarctos cinereus) were monitored by means of radio-relocation in the area of Blair Athol Coal Mine and surrounding properties. Daytime tree use, home range and diet of these koalas was determined in spring and autumn, as was the leaf moisture composition of potential fodder species. Koalas used on average 93 (male koalas) and 56 (female koalas) trees during the period of observation, occupying home ranges of 135 and 101 ha respectively. Mean sightings per tree were 1.19 for both males and females and home-range sizes were not significantly different between sexes or seasons. Koalas were observed returning to previously used daytime roosting trees infrequently (