Optimization of wastepaper sludge ash (WSA) in robust cementitious systems

Abstract : Wastepaper sludge ash (WSA) is generated by a cogeneration station by burning wastepaper sludge. It mainly consists of amorphous aluminosilicate phase, anhydrite, gehlenite, calcite, lime, C2S, C3A, quartz, anorthite, traces of mayenite. Because of its free lime content (~10%), WSA suspension has a high pH (13). Previous researchers have found that the WSA composition has poor robustness and the variations lead to some unsoundness for Portland cement (PC) blended WSA concrete. This thesis focused on the use of WSA in different types of concrete mixes to avoid the deleterious effect of the expansion due to the WSA hydration. As a result, WSA were used in making alkali-activated materials (AAMs) as a precursor source and as a potential activator in consideration of its amorphous content and the high alkaline nature. Moreover, the autogenous shrinkage behavior of PC concrete at low w/b ratio was used in order to compensate the expansion effect due to WSA. The concrete properties as well as the volume change were investigated for the modified WSA blended concrete. The reaction mechanism and microstructure of newly formed binder were evaluated by X-ray diffraction (XRD), calorimetry, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). When WSA was used as precursor, the results showed incompatible reaction between WSA and alkaline solution. The mixtures were not workable and provided very low compressive strength no matter what kinds of chemical activators were used. This was due to the metallic aluminum in WSA, which releases abundant hydrogen gas when WSA reacts with strong alkaline solution. Besides, the results of this thesis showed that WSA can activate the glassy phase contained in slag, glass powder (GP) and class F fly ash (FFA) with an optimum blended ratio of 50:50. The WSA/slag (mass ratio of 50:50) mortar (w/b of 0.47) attained 46 MPa at 28 days without heat curing assistance. A significant fast setting was noticed for the WSA-activated binder due to the C3A phase, free lime and metallic aluminum contained in the WSA. Adding 5% of gypsum can delay the fast setting, but this greatly increased the potential risk of intern sulfate attack. The XRD, TGA and calorimetry analyses demonstrated the formation of ettringite, C-S-H, portlandite, hydrogarnet and calcium carboaluminate in the hydrated binder. The mechanical performance of different binder was closely related to the microstructure of corresponding binder which was proved by the SEM observation. The hydrated WSA/slag and WSA/FFA binder formed a C-A-S-H type of gel with lower Ca/Si ratio (0.47~1.6). A hybrid gel (i.e. C-N-A-S-H) was observed for the WSA/GP binder with a very low Ca/Si ratio (0.26) and Na/Si ratio (0.03). The SEM/EDX analyses displayed the formation of expansive gel (ettringite and thaumasite) in the gypsum added WSA/slag concrete. The gradual emission of hydrogen gas due to the reaction of WSA with alkaline environment significantly increased the porosity and degraded the microstructure of hydrated matrix after the setting. In the last phase of this research WSA-PC blended binder was tailored to form a high autogenous shrinkage concrete in order to compensate the initial expansion. Different binders were proportioned with PC, WSA, silica fume or slag. The microstructure and mechanical properties of concrete can be improved by decreasing w/b ratios and by incorporating silica fume or slag. The 28-day compressive strength of WSA-blended concrete was above 22 MPa and reached 45 MPa when silica fume was added. The PC concrete incorporating silica fume or slag tended to develop higher autogenous shrinkage at low w/b ratios, and thus the ternary binder with the addition of WSA inhibited the long term shrinkage due to the initial expansion property to WSA. In the restrained shrinkage test, the concrete ring incorporating the ternary binder (PC/WSA/slag) revealed negligible potential to cracking up to 96 days as a result of the offset effect by WSA expansion. The WSA blended regular concrete could be produced for potential applications with reduced expansion, good mechanical property and lower permeability.

Exploration d’un modèle d’étude simplifié de la spermiogenèse par l’utilisation de la levure à fission

Résumé: Les cellules germinales mâles remodèlent leur chromatine pour compacter leur noyau afin de protéger leur matériel génétique et assurer un transit optimal vers le gamète femelle. Il a été démontré que tous les spermatides de plusieurs mammifères, incluant l’homme et la souris, présentaient ce mécanisme de remodelage de la chromatine. Celui-ci est caractérisé par une augmentation transitoire de cassures d’ADN dont une quantité importante sont bicaténaires. Ce remodelage chromatinien a été étudié et semble être conservé chez plusieurs espèces, allant de l’algue à l’humain. Dans le contexte de la recherche fondamentale sur le phénomène de la spermiogenèse, il devient parfois très difficile d’investiguer certains aspects importants en vertu de l’impossibilité de réaliser des manipulations génétiques simples. Il est donc impératif de développer un nouveau modèle d’étude plus permissif afin de palier à ces difficultés encourues. Comme le processus de maturation des spores chez la levure à fission présente de grandes similitudes avec la spermiogenèse des mammifères, l’utilisation d’un modèle d’étude basé sur la sporulation de la levure à fission Schizosaccharomyces pombe a été proposée comme modèle comparatif de la spermatogenèse murine. À la suite de la synchronisation de la méiose de la souche S. pombe pat1-114, des analyses d’électrophorèse en champ pulsé (PFGE) et de qTUNEL ont permis de déterminer la présence de cassures bicaténaires transitoires de l’ADN lors de la maturation post-méiotique des ascospores nouvellement formés (t>7h). Des analyses par immunobuvardages dirigés contre le variant d’histones H2AS129p suggère la présence d’un remodelage chromatinien postméiotique dix heures suivant l’induction de la méiose, corroborant le modèle murin. Enfin, des analyses protéomiques couplées à l’analyse par spectrométrie de masse ont permis de proposer l’endonucléase Pnu1 comme candidat potentiellement responsable des cassures bicaténaires transitoires dans l’ADN des ascospores en maturation. En somme, bien que le processus de maturation des spores soit encore bien méconnu, quelques parallèles peuvent être tracés entre la maturation des ascospores de la levure à fission et la spermiogenèse des eucaryotes supérieurs. En identifiant un modèle simple du remodelage chromatinien au niveau de la spermiogenèse animale, on s’assurerait ainsi d’un outil beaucoup plus malléable et versatile pour l’étude fondamentale des événements survenant lors de la spermiogenèse humaine.